Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Benutzeravatar
michalp
Beiträge: 632
Registriert: 12.02.2012 19:18:56
Wohnort: Wien,Simmering

#256 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von michalp »

1. Andre (trailblazer), Plastik, VStabi 5.0, MSH-FBL Set, SAB , Roxxy960, CC BEC, DS510, SH1290MG, Scorpion 880kv@14t, Canomod
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, Stockmotor, Hacker X70 SB Pro, 6S, MSH-Flypbarless, V-Stabi, 9650, 9257
5. Mario (mariokober) CFK von MSH, Scorpion, MSH 80A, TS: Savox, Microbeast, BLS251
6. Flo(torro) cfk-stretch, YGE80 (BEC auf 6V), CC BEC, HK3226 12N10P 6+5x1,25YY 15er ritzel, BLS153@7,5V, BLS251@6V, miniVS 5.2pro Gov
7. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
8.1 Tim (Timmey) Prôtos 500 Plaste : mini V-Stabi 4.0, HK3026-12N14P 5+4x1,18D 6S, 16t, YGE 80, 3x MKS DS9660A+, SAB 430, BLS251, CCBEC PRO @ 6,2v, Spektrum
8.2 Tim (Timmey) Prôtos 500 CFK streched: mini V-Stabi blue 5.1 PRO, HK3026-12N14P 5+5x1,12D, 14t, YGE 60, 3x 1250MG, EDGE 473, 1290MG, Spektrum
9. Patrick (Pat1802), Plaste mit Paddel
10. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
11.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
12. Jörg (Chorge), Plastik mit FBL-Eigenumbau (Alu Blatthalter, Mikado-Mitnehmer), V-Stabi, MSH 80A-Regler und Motor (15T), 3x DS510, BLS251, 6S
13. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
14. Christian (kowi) Plaste & Paddelkopf, MSH 26-10 + YGE60 an 6S & 14T, 3x Savöx SH-1350, SH-1290MG, LTG2100
15. Stephan (Whoostar) CFK und V-Stabi 4.0, 3x Savöx SH-1350, BLS251, Scoripon KV880 @ 14t, Jive60LV, 6s 20C - Gestreched auf 470er Latten
16. Alexander (sptotal) Plastik, V-Stabi 4.0, Scorpion 880kv, YGE60, DS510, SH-1290MG, 6s => ersetzt durch Nachfolger
17. Jens (IceOne) Plastik, Paddel, Scorpion 880kv, YGE 80, DS510 TS, Spartan DS760 + DS520, 6S 2650mAh Flightmaxx 30C
18. Christian (REX ) Plastikchassis, Stockmotor, Alignregler, Savox, Rockamp Gyro, Paddel, Blattschmied Jazz,
19. David (helidave) cfk chassi stock: Motor regler sab blätter ,3*hs 225BB ,1savox, ltg2100
20. Wolfgang (dschim) CFK, ohne Paddel, YGE, Stockmotor, µBeast, SAB
21. Horst (heli123) Plastik, Paddel, MSH Motor/Regler, Gy401/9257, SAB und Jazz Blattschmied, TS 5085MG, Tgy 2650 20-30C, ZippyH 2x3s 2200
22. Christian (hitch) CFK, AC-3X, Motor/Regler Stock, TS Savöx 1250, Heck Savöx 1290
23. Wolfgang (ER Corvulus) Plaste, Paddel, CC60 + Scorpion 880 an 15T, TS HS225, 2100+ 9257, GCT Jazz, NoName 6s 2450/25c
24. Thomas (TJsat) Plaste, Paddel, YGE 80; Stock, Savox, HC, 9257
25. Götz (Gogi) Kunststoff, Microbeast Scorpion 3026 1000KV, Roxxy 960 Regler, SAB Blätter, TS:Align DS510, Heck: BLS 251 A123 6S und 5S 3300er Lipos.
26. Onno (Taumel-Mac) Plastik, Stockmot, YGE-60, Gy 401, Alu-Rotorhalter, Alu-Heck, und latürnich: Paddel!
27. Frank (BoGSer) CFK, Stockregler, -motor, TS Savöx 1250MG, Heck Savöx 1257MG, V-Stabi 4, noch 6S A123
28. Andi (andiz) CFK, YGE 80, Savox, Scorpion 880, V-Stabi 4.0, SLS 6S 2500
29. Matthias (matt44), Plastik, YGE 60, TS: HS-225, Heck: Align DS-520, Baukastenmotor, Rockamp Gyro one, SLS 6S 2200/Zippy 20C 2650
30. Ben (fuci), Plastik, Align 60A Regler, GU-210, HS 225BB, 9257, Stockmotor und Paddelfuci
31. Stefan (stefan baum) Plastik, Mini V-Stabi, Roxxy,Motor: Scorpion 880KV, TS: 3x Savöx , Heck: S9257, Akkus: 2x 6S SLS ZX 2500 / 2x 6S Zippy 2650
32. Perrin CFK, YGE 60, MSH Motor, Spartan DS760 + DS520, 3x DS510, Ar6200, Akku: Turngiy 6s 30C 2650mAh
33. Memphiz, Roxxy 960-6, MSH Motor, LTG2100 + 9257, 3x DS510, Ar6200, Akku: Turnigy 6s 20C 3000mAh
34. Thomas (ToyoTom) Plastik, Paddel, Scorpion880, YGE80, DS760+Savox1357, TS Savox1350, 6S- 2650-20C
35. Andi (AndiYen) CFK, mini-VStabi, Jive 60, Scorpion 3026-880 14t, Savox 1350, S9254, 6S-2200-30C
36. Frank (Killroy-Tattoo) Plasik, Kontronik Motor, CFK Mikado Blätter, Yellow Tuning, Jazz 80, 225 BB Servos, 2,4 Ghz, Akkus: 3900 4S3P Konion
37. Ralf (ralfiboy) Plastik + orig.Fbl-Kopf mit µbeast, Stock-Motor, JetiSpin66, 3*DS510+SH1290MG, Jeti R6 mit MUI75A und 7s A123 SB-halbsym
38. Marcus (Schroedi) Plastik, Paddel, Scorpion HK-3026 1210kv, 15Z, YGE80, TS: HS-82MG, Savox 1357 + GY401, 4s3p Konion 3900 & 3300, Schulze alpha 8.35 35Mhz
39. Christian (Choplifter), CFK, MSH Motor, MSH Regler, Savox SH-1250MG, Spartan DS760 + 9254, Zippy 5s 3300mAh
40. Guillaume(gigi92), CFK, Scorpion 3026-880, Roxxy 960-6, Align DS 510, 3Digi+S9254, 6S Turnigy 2200mah 30C
41. Roland (Helifan.de), Plastik, Werksmotor und -Regler
42. Jörg (Pirol116), CFK Flybarless mit LOGO 400 Haube, befeuert von 6S 2600mAh, HK-3026-880kv, YGE80, 3x SAVÖX 1350, 1x SAVÖX 1257MG, Microbeast, FF7
43. Stefan (buz), Infinity CFK - Paddellos; 7s A123; CC Ice 100; Strecker 330.30; Savox; Jeti Duplex; MicroBeast
44. Daniel (Daniel Gonzalez) Plaste, VS 4.0, Savox 1350 und BLS 251, 880 Scorpion, Jive, 6S Turnigy 20C 2650er
45. Andi (Tieftaucher) CFK, Scorpion 880KV mit 14T, Savox1350, AC-3X mit 9254, Jazz80, SAB Red Devil, Logo 400 Haube
46. Dirk (Silverwing) Kunststoffchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, Mini V-Stabi 4.0, Rockamp Haube T-Rex 500 in Signalfarbe
47. Jan-Malte (Sundog) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-20C
48. Matthias (Matoz) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-30C
49. André (michael.myers) CFK, MSH-Motor, MSH-Regler, Align DS510, KDS-800 mit Savox SH-1290MG, Turnigy 2x3S 2650 30C
50. Jörg (Josche) CFK, MSH-Motor 13T, YGE 60, AC-3X, 3x Savox 1250, 1x BLS 251, ZIPPY 6s1p 3000mAh 20C, FF7, Unilog
51. Arnd (yacco), CFK, Scorpion HK-3026 1000 15T, Xetronic 70A, 3x FS-550 BB MG, 1x MKS DS8910, µBeast, 5S 3000/3300 mAh, MX16 mit Assan 2G4
52. Mike (justhelicopters), Kunststoffchassis, Scorpion 880, Jazz 80-6-18, Futaba S9650 u. S9657, Mini VStabi, SLS ZX 2500 30C
53. Holger (Idefix), Kunststoffchassis, Roxxy960-6, Scorpion 3026 5+5x1,12D 750KV + 17R. ,Blattschmied GCT-Ultra-Acro, DES 658 BB/MG, Futaba S9254, Mini V-Stabi, CC Bec 6V, 6S 2200mah 30-40C, MX22 mit Spekrtum DM9
54. Armin (pelzebub) Plastik, Scorpion 880, CC ICE 75, 3x Align DS510, Spartan Quark+JR8900G, FF7, Akku wahrscheinlich 6s LiFe
55. Steven (b3nJi) Protos CFK, 3xSavöx SH-1350, 1xAlign ds620, MICROBEAST, YGE120, HK3026-12N14P 5+4x1,18D 840kV 17Z, 6S 2650 30C und en Mini Protos :-]
56. Jürgen (Kupfer) Protos CFK SE, Scorpion HK3026 12N14P 5+4x1.18D, MSH 80A +CC BEC, Microbeast, SAB 470, 3x Hyperion DH16-SCD, 1x Hyperion DH16-GCD, Turnigy nano-tech 6S 2,65Ah
57. Chris (pepto) Protos CFK, MSH Regler und Motor @15T, SAB/KBDD Blades, 3x Align DS510, Savox SH1290MG, AC-3X/3Digi, Turnigy 2650mAh 20/30C
58. Timo (PeterLustich) Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, Spartan DS760, 2xTurnigy 2650 mAh 30C
59. TOM (tombof3a), Protos Plastik, Paddel, Stock Motor, Hacker SB70 Regler, SAB, 3xHS225BB, 1x Futaba 9257, Rockampgyro, 2x 3S SLS EP 2650 mAh 30C
60. Klaus (worldofmaya), Protos Kunststoff , Rigid, Stock Motor, YGE 80LV, Maniac, 3x Futaba 9650, 1x Futaba BLS251, VStabi v4, 5s Turnigy 3600 30C, 6s Turnigy 3000 30C
61. Daniel (don-omar) ->>>STRECH+ Logo 400Canopy, 3x MKS DS 9660 A+, Roxxy 9-100, Scorpion 880, microBeast, S9254, 2200er Rockamps
62. Thilo (kilothilo) Protos CFK, Jazz 80, TS S9650, Heck BLS254, Gy-520, Stock Motor, SAB Blätter (noch mit Ruderkopf )
63. Sebastian (zamb0) - Protos CFK, Jazz 80, HS-5245MG, Spartan, BLS 251, Blattschmied/SAB, 2x A123 7s1p und Krückstock
64. Mike (Raptor-Spy) Protos CFK, Stock Antrieb, Align 510 TS Servos, heckservo Futaba S9256, Stock SAB Blätter, Stabi System MicroBeast wenn es mal da ist, 6S 2650 Turnigys
65. Alexander(ali.k.) Protos CFK, MSH-Regler, MSH-Motor (14T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1290MG, Rockamp Gyro One, 6S Rhino 2250 25C
66. Markus (electron6), Protos CFK, MSH-Regler, MSH-Motor, SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
67. Jonas (Provotroll) : Plaste-Stretch-Prôtos, Torro-Croco, Mini V-Stabi, YGE 60, 3 x Savöx SH-1350, Futaba S9257, Futaba R617FS, 470mm SABs, 3Ks, Microhelis Seitenleitwerk
68. Mike (taucherle): Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1357, paddellos System MicroBeast, 6S 2650 Turnigys
69. Adrian (wildcat): Protos normal, Jive 80LV, Scorpion 880, SAB-Blätter mit Protos-Holo, FBL - Microbeast, 6S 2650 Turnigy's
70. Micha (mozart1982): Protos Carbon, YGE 60, Scorpion 880, Vstabi 5.0, Savox, 14T, Rockamp Lipos
71. Frank (Fränky): Protos CFK, MSH Scorpion 880 KV, 15 T, MSH YGE-60, 4x DES676 BB, MicroBeast, MSH SAB Blätter, 6S 2200 P- LiFe
72. Chris (Chris_D): Protos Carbon mit MSH FBL Umbau, YGE60, Scorpion 880, SAB, Savox 1350, Align DS650, Microbeast, R617FS, 6S Turnigy 2200 30/40C
73. Hardy (Winnihardy): Protos Carbon; FBL Umbau MSH; Scorpion 880; YGE- 60, SAB; Savox 1350; Savox 1290; Microbeast; 6s Turnigy 2200 25c
74.Ingo ( Plextor ) Protos Kunststoff , Orginal Motor , 3x HS225Hb, 1 , S9650 , LTG2100 , SAB , 2 x 3 S 2650 Turnigy , YGE 60
75. -Flo- , Plastik, YGE 60, Scorpion 880kV, GP780, SH-1250MG, SH-1257MG, Turnigy 6S 2650mAh 30C
76. Matthias (foxi): Protos Kunststoff, MSH Scorpion 880 KV, 15 T, MSH YGE-60, DES676 BB, GY-401,5S 3000 Zippy
77.Jörg(Askalon) Plastik, MSH Scorpion 880kv,14er ,yge 60, savox sh1250mg,mini-Vstabi, Savox 1290mg,Sab red Devil,futaba 6106HF,Rockamp 6S 30C 2600
78. Jürg (Schletzer), Protos CFK, YGE-60, Scorpion 880kV, SAB Blätter, 3x Savox SH-1250MG, 1x Savox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
79.Tilo (Pegasus) Plaste Protos,MSH Motor Scorpion 880,YGE 60 regler,SAB Latten,Paddellos mit Microbeast, 6S 2200er LiFePo, Savox-metallgetriebelchen
80.Dominik 2 Stück CFKmit Jeti Duplex: Einer Microbeast mit Radix, Savox1350 an TS und FS555BB, YGE80 an MSH Stock, der andere mit DES676 an TS, Gy401 u 9254, Roxxy 960 an Scorpion 3026 und Spinblades demnächst im PET-Rumpf...
81.Ludwig (Lud-wig) Protos Kunststoff, Hughes 500 D Rumpf, Scorpion 1000 KV, 15 T, Hacker X-70 Pro, SAB Blätter, 3xHitec HS 85BB, 1xRobbe FS550 Carbon Digi, GY-401, 4s SLS 4000
82 .Uwe (ueber30) Protos Kunststoff, Scorpion 880 KV 14er Ritzel,Roxxy 960-6 ,3x Align DS 510 , GP 750 / 9254 , Turnigy 6S 2650 20C oder 7S LiFe
83. Gernot (Outrunner) Protos CFK, Scorpion 880 KV 14er Ritzel, YGE 60, 3x Savöx 1250MG, Microbeast / Savöx 1290MG, SLS APL 5S 3300 30C+
84. Fabian (Colonia), Protos CFK, Scorpion 880KV, Jive 80Lv, 3x Savöx 1250MG, Microbeast, Savöx 1290MG, 6S
85. Thomas (Tom.Thelis) Protos Kunststoff, Scorpion 880KV, 14T, YGE 60, 3x Savox SH-1250MG, GY-520 mit BLS254, Turnigy 6S 2450mAh 30C, Spinblades HS
86. Robert (R013ert) Protos CFK Stretch FBL, Scorpion 3026 12n8p 5+4d, 15T, YGE 60, Castle Creations BEC, 3x Align DS510 @ 7.0v , Mini V-Stabi Blueline mit 2 Spektrum Sats, Savox SH-1290mg @ 6.2V, SAB 470mm und KBDB Heckblätter
87. Thomas(Tomp), Plastik, Scorpion, YGE, SAB, Savox, Team Orion, Mini Stabi Blueline Express, Turnigy 2650 20C
88. Peter ( Pietbaer ), Protos Kunststoff, Scorpion 880 KV, Regler YGE 60A, 15er Ritzel, TS 3x Savöx 1350, Heck Savöx 1357, GY-401, Blätter SAB, SLS APL 6S 2650 mAh 30C+, DX 8
89 Marius, Protos CFK, Scorpion 880kv, Regler YGE 60A, TS: Savöx 1350, Heck: Savöx 1290MG, Microbeast 2.0, Blätter: SAB, Turnigy 2650 20C, Sender: Graupner MX-22 mit Raast Modul Empfänger: Futaba FS617
90. Frank (phoenix7), Protos CFK FBL, Scorpion (Stock), YGE 60A, TS: SAVÖX 1250MG, Heck: SAVÖX 1257MG, V-Stabi Mini 5.2 Pro, Blätter: Spinblades FBL, Turnigy 3000 20C, WK2801 Pro
91.Benjamin(Ben), Plaste Protos,MSH Fbl Kopf und Microbeast V2, Scorpion 880 mit 15T Ritzel,Simprop Magic 62H,TS:Futaba 9650,Heck Savöx 1290MG, Blätter: Blattschmied Ultra FBL,Turnigy 6S 2650 Lipo[/quote]
92.ChainMan, Protos Kunststoff, Scorpion 880KV, YGE 60, 3x Savox SH-1250MG, Savox 1257MG, MSH Fbl Kopf, Mini Stabi Blueline 5.1, SAB + Heck Original, Turnigy 6S 2450mAh 20C + Thunder Power 6S 2700er 30C.
93. the-fallen, Protos CFK, "Castle ICE Lite 100" Regler mit Datenlogger, "Castle 10A" BEC, TS-Servo: Align510, Heck: Futaba BL251, MicroBeast, Rest ist Standard
94. Markusgu, Protos CFK,yge80,1257 Heck, 9650 ts, nanotec 6s,gy520
95. Frank(Crusty77), Protos Plaste,MSH Motor 880KV, YGE60, 3x DES676BB, 1357SH, MSH FBL Kopf, Microbeast V2, Blätter: Helitec + Heck Original, Life 6s 2200mAh
96. Michl (dilg), Protos Kunststoff, Scorpion 880 KV 14er Ritzel, Yge60, 3x Robbe FS 550 CD + Hitec 6965, v-stabi, Kokam 5s 3200/Turnigy 6S 2650
97. Sven (slevin), Prôtos Kunststoff, Scorpion 3026-880, YGE 60, 3x Savöx SH-1250MG + Futaba S9257, Align GP-780, SAB, 6S A123
98. Alex (Alex2707) Protos CFK stretched @ 8,0V, Scorpion 3026-880, Roxxy 9100-6, 3x Hyperion DH16-SCD + Hyperion DH20X-GCD, CastleCreations BEC @ 8,0V, Microbeast 3.0.8, EDGE 473mm FBL, Radix Heckblätter, Turnigy 6S 3000mah
99. Stefan ( ESPler ) Protos CFK Stretch @ 8,4V, CC-BEC 10A, 3026- 880, Roxxy 9100-6, 3x Hyperion DH16-SCD, Heck Hyperion DH20X-GCD, Microbeast 3.08. SAB RedDevil 465 mm Umbau 03.10.2011
100. Stefan ( forrest ) Protos CFK Stretched , MSH 880Kv, YGE 80A, 3x Savöx SH-1250MG , 1x Savöx SH1290-MG am Heck, Microbeast V3, Turnigy 2650 6s, GensAce 2600 6s, SAB 470mm
101. Kiba, Protos CFK, Scorpion 880KV, YGE60A, 3x Savöx 1350, 1x Savöx SH1290MG am Heck, Vstabi 5.2 Pro, SLS 2650 6s Eco, SAB - SB - Radix 430mm
102. Ayhan ( paranoid007 ) Protos CFK, 820, Roxxy 9100-6, 3x Align DS510, Heck Savox SH1290, Microbeast, Blattschmied + Edge 473 für Stretch
103. Frank, Protos CFK, Scorpion 880KV, Jive60, 3x Savöx 1350, 1x BLS 251 am Heck, Vstabi 5.1 Pro, Turnigy 5S, Blattschmied
104. Jens (heli_junkie), Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Graupner DES 676 BB, 1x Savöx SH1290MG, Mini VStabi 5.2 Pro, Turnigy 6S 2650mAh 40c, SAB 430m
105. Manuel (Manuel-P) Protos 500 Plstik, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Turnigy 6S 3000mAh, 425er SAB Latten
106. Alex (Tatum) Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, BeastX, Turnigy 6S 2650mAh 20c, SAB 430
107. Daniel (Daniel...) Protos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Gensace 6S 2600mAh 25C, SAB
108. Olaf12: Protos 500 CFK FBL; Strecker Motor; 12er Ritzel, 18er Alu-Heckritzel; Kontronik Jazz 80; TS Futaba S9650; Heck BLS254; 6S 2600 SLS 35C; Blattschmied Ultra FBL 430mm; GyroBot 900; R608FS
109. Luca (MrHeli33) Protos 500 Plastik, 15er Ritzel, Stock Motor, MSH 80A, 3mal Graupner Des 658 BB MG, Heck S9257 ( vielleicht werde ich das Kds N690 mal als Heckservo verwenden, Modellexxpert 2600mah/30C(Withe line) Torison 430mm, Align 3Gx, Graupner MX-20 Hott
110. Basti (vierfuffzig) Plaste 500, alles Stock, 3 x KDS N580, Heck KDS N690, MiniVStabi
111. Basti (Yaku79) Plaste 500 FBL, 3x Hyperion Atlas HP-DH16-SCD @7V, 1x Hyperion Atlas HP-DH20x-GCD @7V, 1x Scorpion HK 3026-1400 umgewickelt bei Torro auf 1030kv @ 15T, 1x CC ICE 75, 1x Mini vStabi 5.2 pro, Edge 423 FBL Latten, Turnigy 6S 2650mAh 40C/Gens Ace 6S 2600mAh 25C
112. Micha (Schmusebaer61) Plaste 500 FBL, Scorpion 880KV, Kontronik Jazz 80, 3 x Savox SH-1350, Graupner DS 8900G am Heck, Blätter SAB / Alin 3G, BeastX 3.0, Fusuno CFK Finne, Lipoblitzer, Turnigy 6S 3000
113. Robert (delta-hotel) Protos 500 CFK FBL, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x BLS 251, V-Stabi 5.2 Pro, Turnigy 3300 6S nano-tech
114. Tom (tomtom77) Prôtos 500 Plaste FBL, Scorpion 880KV, YGE 60A V4, 3x Graupner DES678, 1x DES 578, 3GX, Turnigy 5s 3600er
115. Manuel (roehrig), PlasteProtos / Beast mit nur 1xDSMX-Satellit, Motor 3026-880Kv und YGE 60A, TS-Servos: Graupner DES 676 BB, Heckservo: Graupner DS 8900 G, Funke: DX6i, Akku: 7S1-A123 2300mAh, 1750U/min = über 10Min Flugzeit = 1800 - 2000mAh. (180-200mAh/min)
116. Onno: Plaste Streck-Prôtos, Stock Scorpion, Jive 80LV, 3x DS510, 1x SH12920MG, Beast, P-Ionen 3,2Ah, 12t am Motor, 18t am Heck, Spin Blades FBL
117. Benjamin (Almigurt) Plastik streck- Protos, Stock Motor, Yge60, 12T Ritzel, 18T Heck, HS5245MG(TS), BLS-254 am Heck, HT Dark-Magic 465mm, P-Ion 3200, µbeast
118. Michal (Michalp)Protos 500 Extrem(wurzer-heli Edition) 1,3 KG Fluggewicht-Scorp 3026-YGE 60 LV-15er Ritzel-Savöx sh 1250 TS-SH 1257 Heck-Radix 430 FBL-VStabi Pro 5.3 2200 Roxxy (3-6s) Headspeed 1400(3D)- 3200(Smack)
Benutzeravatar
michalp
Beiträge: 632
Registriert: 12.02.2012 19:18:56
Wohnort: Wien,Simmering

#257 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von michalp »

1. Andre (trailblazer), Plastik, VStabi 5.0, MSH-FBL Set, SAB , Roxxy960, CC BEC, DS510, SH1290MG, Scorpion 880kv@14t, Canomod
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, Stockmotor, Hacker X70 SB Pro, 6S, MSH-Flypbarless, V-Stabi, 9650, 9257
5. Mario (mariokober) CFK von MSH, Scorpion, MSH 80A, TS: Savox, Microbeast, BLS251
6. Flo(torro) cfk-stretch, YGE80 (BEC auf 6V), CC BEC, HK3226 12N10P 6+5x1,25YY 15er ritzel, BLS153@7,5V, BLS251@6V, miniVS 5.2pro Gov
7. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
8.1 Tim (Timmey) Prôtos 500 Plaste : mini V-Stabi 4.0, HK3026-12N14P 5+4x1,18D 6S, 16t, YGE 80, 3x MKS DS9660A+, SAB 430, BLS251, CCBEC PRO @ 6,2v, Spektrum
8.2 Tim (Timmey) Prôtos 500 CFK streched: mini V-Stabi blue 5.1 PRO, HK3026-12N14P 5+5x1,12D, 14t, YGE 60, 3x 1250MG, EDGE 473, 1290MG, Spektrum
9. Patrick (Pat1802), Plaste mit Paddel
10. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
11.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
12. Jörg (Chorge), Plastik mit FBL-Eigenumbau (Alu Blatthalter, Mikado-Mitnehmer), V-Stabi, MSH 80A-Regler und Motor (15T), 3x DS510, BLS251, 6S
13. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
14. Christian (kowi) Plaste & Paddelkopf, MSH 26-10 + YGE60 an 6S & 14T, 3x Savöx SH-1350, SH-1290MG, LTG2100
15. Stephan (Whoostar) CFK und V-Stabi 4.0, 3x Savöx SH-1350, BLS251, Scoripon KV880 @ 14t, Jive60LV, 6s 20C - Gestreched auf 470er Latten
16. Alexander (sptotal) Plastik, V-Stabi 4.0, Scorpion 880kv, YGE60, DS510, SH-1290MG, 6s => ersetzt durch Nachfolger
17. Jens (IceOne) Plastik, Paddel, Scorpion 880kv, YGE 80, DS510 TS, Spartan DS760 + DS520, 6S 2650mAh Flightmaxx 30C
18. Christian (REX ) Plastikchassis, Stockmotor, Alignregler, Savox, Rockamp Gyro, Paddel, Blattschmied Jazz,
19. David (helidave) cfk chassi stock: Motor regler sab blätter ,3*hs 225BB ,1savox, ltg2100
20. Wolfgang (dschim) CFK, ohne Paddel, YGE, Stockmotor, µBeast, SAB
21. Horst (heli123) Plastik, Paddel, MSH Motor/Regler, Gy401/9257, SAB und Jazz Blattschmied, TS 5085MG, Tgy 2650 20-30C, ZippyH 2x3s 2200
22. Christian (hitch) CFK, AC-3X, Motor/Regler Stock, TS Savöx 1250, Heck Savöx 1290
23. Wolfgang (ER Corvulus) Plaste, Paddel, CC60 + Scorpion 880 an 15T, TS HS225, 2100+ 9257, GCT Jazz, NoName 6s 2450/25c
24. Thomas (TJsat) Plaste, Paddel, YGE 80; Stock, Savox, HC, 9257
25. Götz (Gogi) Kunststoff, Microbeast Scorpion 3026 1000KV, Roxxy 960 Regler, SAB Blätter, TS:Align DS510, Heck: BLS 251 A123 6S und 5S 3300er Lipos.
26. Onno (Taumel-Mac) Plastik, Stockmot, YGE-60, Gy 401, Alu-Rotorhalter, Alu-Heck, und latürnich: Paddel!
27. Frank (BoGSer) CFK, Stockregler, -motor, TS Savöx 1250MG, Heck Savöx 1257MG, V-Stabi 4, noch 6S A123
28. Andi (andiz) CFK, YGE 80, Savox, Scorpion 880, V-Stabi 4.0, SLS 6S 2500
29. Matthias (matt44), Plastik, YGE 60, TS: HS-225, Heck: Align DS-520, Baukastenmotor, Rockamp Gyro one, SLS 6S 2200/Zippy 20C 2650
30. Ben (fuci), Plastik, Align 60A Regler, GU-210, HS 225BB, 9257, Stockmotor und Paddelfuci
31. Stefan (stefan baum) Plastik, Mini V-Stabi, Roxxy,Motor: Scorpion 880KV, TS: 3x Savöx , Heck: S9257, Akkus: 2x 6S SLS ZX 2500 / 2x 6S Zippy 2650
32. Perrin CFK, YGE 60, MSH Motor, Spartan DS760 + DS520, 3x DS510, Ar6200, Akku: Turngiy 6s 30C 2650mAh
33. Memphiz, Roxxy 960-6, MSH Motor, LTG2100 + 9257, 3x DS510, Ar6200, Akku: Turnigy 6s 20C 3000mAh
34. Thomas (ToyoTom) Plastik, Paddel, Scorpion880, YGE80, DS760+Savox1357, TS Savox1350, 6S- 2650-20C
35. Andi (AndiYen) CFK, mini-VStabi, Jive 60, Scorpion 3026-880 14t, Savox 1350, S9254, 6S-2200-30C
36. Frank (Killroy-Tattoo) Plasik, Kontronik Motor, CFK Mikado Blätter, Yellow Tuning, Jazz 80, 225 BB Servos, 2,4 Ghz, Akkus: 3900 4S3P Konion
37. Ralf (ralfiboy) Plastik + orig.Fbl-Kopf mit µbeast, Stock-Motor, JetiSpin66, 3*DS510+SH1290MG, Jeti R6 mit MUI75A und 7s A123 SB-halbsym
38. Marcus (Schroedi) Plastik, Paddel, Scorpion HK-3026 1210kv, 15Z, YGE80, TS: HS-82MG, Savox 1357 + GY401, 4s3p Konion 3900 & 3300, Schulze alpha 8.35 35Mhz
39. Christian (Choplifter), CFK, MSH Motor, MSH Regler, Savox SH-1250MG, Spartan DS760 + 9254, Zippy 5s 3300mAh
40. Guillaume(gigi92), CFK, Scorpion 3026-880, Roxxy 960-6, Align DS 510, 3Digi+S9254, 6S Turnigy 2200mah 30C
41. Roland (Helifan.de), Plastik, Werksmotor und -Regler
42. Jörg (Pirol116), CFK Flybarless mit LOGO 400 Haube, befeuert von 6S 2600mAh, HK-3026-880kv, YGE80, 3x SAVÖX 1350, 1x SAVÖX 1257MG, Microbeast, FF7
43. Stefan (buz), Infinity CFK - Paddellos; 7s A123; CC Ice 100; Strecker 330.30; Savox; Jeti Duplex; MicroBeast
44. Daniel (Daniel Gonzalez) Plaste, VS 4.0, Savox 1350 und BLS 251, 880 Scorpion, Jive, 6S Turnigy 20C 2650er
45. Andi (Tieftaucher) CFK, Scorpion 880KV mit 14T, Savox1350, AC-3X mit 9254, Jazz80, SAB Red Devil, Logo 400 Haube
46. Dirk (Silverwing) Kunststoffchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, Mini V-Stabi 4.0, Rockamp Haube T-Rex 500 in Signalfarbe
47. Jan-Malte (Sundog) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-20C
48. Matthias (Matoz) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-30C
49. André (michael.myers) CFK, MSH-Motor, MSH-Regler, Align DS510, KDS-800 mit Savox SH-1290MG, Turnigy 2x3S 2650 30C
50. Jörg (Josche) CFK, MSH-Motor 13T, YGE 60, AC-3X, 3x Savox 1250, 1x BLS 251, ZIPPY 6s1p 3000mAh 20C, FF7, Unilog
51. Arnd (yacco), CFK, Scorpion HK-3026 1000 15T, Xetronic 70A, 3x FS-550 BB MG, 1x MKS DS8910, µBeast, 5S 3000/3300 mAh, MX16 mit Assan 2G4
52. Mike (justhelicopters), Kunststoffchassis, Scorpion 880, Jazz 80-6-18, Futaba S9650 u. S9657, Mini VStabi, SLS ZX 2500 30C
53. Holger (Idefix), Kunststoffchassis, Roxxy960-6, Scorpion 3026 5+5x1,12D 750KV + 17R. ,Blattschmied GCT-Ultra-Acro, DES 658 BB/MG, Futaba S9254, Mini V-Stabi, CC Bec 6V, 6S 2200mah 30-40C, MX22 mit Spekrtum DM9
54. Armin (pelzebub) Plastik, Scorpion 880, CC ICE 75, 3x Align DS510, Spartan Quark+JR8900G, FF7, Akku wahrscheinlich 6s LiFe
55. Steven (b3nJi) Protos CFK, 3xSavöx SH-1350, 1xAlign ds620, MICROBEAST, YGE120, HK3026-12N14P 5+4x1,18D 840kV 17Z, 6S 2650 30C und en Mini Protos :-]
56. Jürgen (Kupfer) Protos CFK SE, Scorpion HK3026 12N14P 5+4x1.18D, MSH 80A +CC BEC, Microbeast, SAB 470, 3x Hyperion DH16-SCD, 1x Hyperion DH16-GCD, Turnigy nano-tech 6S 2,65Ah
57. Chris (pepto) Protos CFK, MSH Regler und Motor @15T, SAB/KBDD Blades, 3x Align DS510, Savox SH1290MG, AC-3X/3Digi, Turnigy 2650mAh 20/30C
58. Timo (PeterLustich) Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, Spartan DS760, 2xTurnigy 2650 mAh 30C
59. TOM (tombof3a), Protos Plastik, Paddel, Stock Motor, Hacker SB70 Regler, SAB, 3xHS225BB, 1x Futaba 9257, Rockampgyro, 2x 3S SLS EP 2650 mAh 30C
60. Klaus (worldofmaya), Protos Kunststoff , Rigid, Stock Motor, YGE 80LV, Maniac, 3x Futaba 9650, 1x Futaba BLS251, VStabi v4, 5s Turnigy 3600 30C, 6s Turnigy 3000 30C
61. Daniel (don-omar) ->>>STRECH+ Logo 400Canopy, 3x MKS DS 9660 A+, Roxxy 9-100, Scorpion 880, microBeast, S9254, 2200er Rockamps
62. Thilo (kilothilo) Protos CFK, Jazz 80, TS S9650, Heck BLS254, Gy-520, Stock Motor, SAB Blätter (noch mit Ruderkopf )
63. Sebastian (zamb0) - Protos CFK, Jazz 80, HS-5245MG, Spartan, BLS 251, Blattschmied/SAB, 2x A123 7s1p und Krückstock
64. Mike (Raptor-Spy) Protos CFK, Stock Antrieb, Align 510 TS Servos, heckservo Futaba S9256, Stock SAB Blätter, Stabi System MicroBeast wenn es mal da ist, 6S 2650 Turnigys
65. Alexander(ali.k.) Protos CFK, MSH-Regler, MSH-Motor (14T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1290MG, Rockamp Gyro One, 6S Rhino 2250 25C
66. Markus (electron6), Protos CFK, MSH-Regler, MSH-Motor, SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
67. Jonas (Provotroll) : Plaste-Stretch-Prôtos, Torro-Croco, Mini V-Stabi, YGE 60, 3 x Savöx SH-1350, Futaba S9257, Futaba R617FS, 470mm SABs, 3Ks, Microhelis Seitenleitwerk
68. Mike (taucherle): Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1357, paddellos System MicroBeast, 6S 2650 Turnigys
69. Adrian (wildcat): Protos normal, Jive 80LV, Scorpion 880, SAB-Blätter mit Protos-Holo, FBL - Microbeast, 6S 2650 Turnigy's
70. Micha (mozart1982): Protos Carbon, YGE 60, Scorpion 880, Vstabi 5.0, Savox, 14T, Rockamp Lipos
71. Frank (Fränky): Protos CFK, MSH Scorpion 880 KV, 15 T, MSH YGE-60, 4x DES676 BB, MicroBeast, MSH SAB Blätter, 6S 2200 P- LiFe
72. Chris (Chris_D): Protos Carbon mit MSH FBL Umbau, YGE60, Scorpion 880, SAB, Savox 1350, Align DS650, Microbeast, R617FS, 6S Turnigy 2200 30/40C
73. Hardy (Winnihardy): Protos Carbon; FBL Umbau MSH; Scorpion 880; YGE- 60, SAB; Savox 1350; Savox 1290; Microbeast; 6s Turnigy 2200 25c
74.Ingo ( Plextor ) Protos Kunststoff , Orginal Motor , 3x HS225Hb, 1 , S9650 , LTG2100 , SAB , 2 x 3 S 2650 Turnigy , YGE 60
75. -Flo- , Plastik, YGE 60, Scorpion 880kV, GP780, SH-1250MG, SH-1257MG, Turnigy 6S 2650mAh 30C
76. Matthias (foxi): Protos Kunststoff, MSH Scorpion 880 KV, 15 T, MSH YGE-60, DES676 BB, GY-401,5S 3000 Zippy
77.Jörg(Askalon) Plastik, MSH Scorpion 880kv,14er ,yge 60, savox sh1250mg,mini-Vstabi, Savox 1290mg,Sab red Devil,futaba 6106HF,Rockamp 6S 30C 2600
78. Jürg (Schletzer), Protos CFK, YGE-60, Scorpion 880kV, SAB Blätter, 3x Savox SH-1250MG, 1x Savox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
79.Tilo (Pegasus) Plaste Protos,MSH Motor Scorpion 880,YGE 60 regler,SAB Latten,Paddellos mit Microbeast, 6S 2200er LiFePo, Savox-metallgetriebelchen
80.Dominik 2 Stück CFKmit Jeti Duplex: Einer Microbeast mit Radix, Savox1350 an TS und FS555BB, YGE80 an MSH Stock, der andere mit DES676 an TS, Gy401 u 9254, Roxxy 960 an Scorpion 3026 und Spinblades demnächst im PET-Rumpf...
81.Ludwig (Lud-wig) Protos Kunststoff, Hughes 500 D Rumpf, Scorpion 1000 KV, 15 T, Hacker X-70 Pro, SAB Blätter, 3xHitec HS 85BB, 1xRobbe FS550 Carbon Digi, GY-401, 4s SLS 4000
82 .Uwe (ueber30) Protos Kunststoff, Scorpion 880 KV 14er Ritzel,Roxxy 960-6 ,3x Align DS 510 , GP 750 / 9254 , Turnigy 6S 2650 20C oder 7S LiFe
83. Gernot (Outrunner) Protos CFK, Scorpion 880 KV 14er Ritzel, YGE 60, 3x Savöx 1250MG, Microbeast / Savöx 1290MG, SLS APL 5S 3300 30C+
84. Fabian (Colonia), Protos CFK, Scorpion 880KV, Jive 80Lv, 3x Savöx 1250MG, Microbeast, Savöx 1290MG, 6S
85. Thomas (Tom.Thelis) Protos Kunststoff, Scorpion 880KV, 14T, YGE 60, 3x Savox SH-1250MG, GY-520 mit BLS254, Turnigy 6S 2450mAh 30C, Spinblades HS
86. Robert (R013ert) Protos CFK Stretch FBL, Scorpion 3026 12n8p 5+4d, 15T, YGE 60, Castle Creations BEC, 3x Align DS510 @ 7.0v , Mini V-Stabi Blueline mit 2 Spektrum Sats, Savox SH-1290mg @ 6.2V, SAB 470mm und KBDB Heckblätter
87. Thomas(Tomp), Plastik, Scorpion, YGE, SAB, Savox, Team Orion, Mini Stabi Blueline Express, Turnigy 2650 20C
88. Peter ( Pietbaer ), Protos Kunststoff, Scorpion 880 KV, Regler YGE 60A, 15er Ritzel, TS 3x Savöx 1350, Heck Savöx 1357, GY-401, Blätter SAB, SLS APL 6S 2650 mAh 30C+, DX 8
89 Marius, Protos CFK, Scorpion 880kv, Regler YGE 60A, TS: Savöx 1350, Heck: Savöx 1290MG, Microbeast 2.0, Blätter: SAB, Turnigy 2650 20C, Sender: Graupner MX-22 mit Raast Modul Empfänger: Futaba FS617
90. Frank (phoenix7), Protos CFK FBL, Scorpion (Stock), YGE 60A, TS: SAVÖX 1250MG, Heck: SAVÖX 1257MG, V-Stabi Mini 5.2 Pro, Blätter: Spinblades FBL, Turnigy 3000 20C, WK2801 Pro
91.Benjamin(Ben), Plaste Protos,MSH Fbl Kopf und Microbeast V2, Scorpion 880 mit 15T Ritzel,Simprop Magic 62H,TS:Futaba 9650,Heck Savöx 1290MG, Blätter: Blattschmied Ultra FBL,Turnigy 6S 2650 Lipo[/quote]
92.ChainMan, Protos Kunststoff, Scorpion 880KV, YGE 60, 3x Savox SH-1250MG, Savox 1257MG, MSH Fbl Kopf, Mini Stabi Blueline 5.1, SAB + Heck Original, Turnigy 6S 2450mAh 20C + Thunder Power 6S 2700er 30C.
93. the-fallen, Protos CFK, "Castle ICE Lite 100" Regler mit Datenlogger, "Castle 10A" BEC, TS-Servo: Align510, Heck: Futaba BL251, MicroBeast, Rest ist Standard
94. Markusgu, Protos CFK,yge80,1257 Heck, 9650 ts, nanotec 6s,gy520
95. Frank(Crusty77), Protos Plaste,MSH Motor 880KV, YGE60, 3x DES676BB, 1357SH, MSH FBL Kopf, Microbeast V2, Blätter: Helitec + Heck Original, Life 6s 2200mAh
96. Michl (dilg), Protos Kunststoff, Scorpion 880 KV 14er Ritzel, Yge60, 3x Robbe FS 550 CD + Hitec 6965, v-stabi, Kokam 5s 3200/Turnigy 6S 2650
97. Sven (slevin), Prôtos Kunststoff, Scorpion 3026-880, YGE 60, 3x Savöx SH-1250MG + Futaba S9257, Align GP-780, SAB, 6S A123
98. Alex (Alex2707) Protos CFK stretched @ 8,0V, Scorpion 3026-880, Roxxy 9100-6, 3x Hyperion DH16-SCD + Hyperion DH20X-GCD, CastleCreations BEC @ 8,0V, Microbeast 3.0.8, EDGE 473mm FBL, Radix Heckblätter, Turnigy 6S 3000mah
99. Stefan ( ESPler ) Protos CFK Stretch @ 8,4V, CC-BEC 10A, 3026- 880, Roxxy 9100-6, 3x Hyperion DH16-SCD, Heck Hyperion DH20X-GCD, Microbeast 3.08. SAB RedDevil 465 mm Umbau 03.10.2011
100. Stefan ( forrest ) Protos CFK Stretched , MSH 880Kv, YGE 80A, 3x Savöx SH-1250MG , 1x Savöx SH1290-MG am Heck, Microbeast V3, Turnigy 2650 6s, GensAce 2600 6s, SAB 470mm
101. Kiba, Protos CFK, Scorpion 880KV, YGE60A, 3x Savöx 1350, 1x Savöx SH1290MG am Heck, Vstabi 5.2 Pro, SLS 2650 6s Eco, SAB - SB - Radix 430mm
102. Ayhan ( paranoid007 ) Protos CFK, 820, Roxxy 9100-6, 3x Align DS510, Heck Savox SH1290, Microbeast, Blattschmied + Edge 473 für Stretch
103. Frank, Protos CFK, Scorpion 880KV, Jive60, 3x Savöx 1350, 1x BLS 251 am Heck, Vstabi 5.1 Pro, Turnigy 5S, Blattschmied
104. Jens (heli_junkie), Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Graupner DES 676 BB, 1x Savöx SH1290MG, Mini VStabi 5.2 Pro, Turnigy 6S 2650mAh 40c, SAB 430m
105. Manuel (Manuel-P) Protos 500 Plstik, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Turnigy 6S 3000mAh, 425er SAB Latten
106. Alex (Tatum) Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, BeastX, Turnigy 6S 2650mAh 20c, SAB 430
107. Daniel (Daniel...) Protos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Gensace 6S 2600mAh 25C, SAB
108. Olaf12: Protos 500 CFK FBL; Strecker Motor; 12er Ritzel, 18er Alu-Heckritzel; Kontronik Jazz 80; TS Futaba S9650; Heck BLS254; 6S 2600 SLS 35C; Blattschmied Ultra FBL 430mm; GyroBot 900; R608FS
109. Luca (MrHeli33) Protos 500 Plastik, 15er Ritzel, Stock Motor, MSH 80A, 3mal Graupner Des 658 BB MG, Heck S9257 ( vielleicht werde ich das Kds N690 mal als Heckservo verwenden, Modellexxpert 2600mah/30C(Withe line) Torison 430mm, Align 3Gx, Graupner MX-20 Hott
110. Basti (vierfuffzig) Plaste 500, alles Stock, 3 x KDS N580, Heck KDS N690, MiniVStabi
111. Basti (Yaku79) Plaste 500 FBL, 3x Hyperion Atlas HP-DH16-SCD @7V, 1x Hyperion Atlas HP-DH20x-GCD @7V, 1x Scorpion HK 3026-1400 umgewickelt bei Torro auf 1030kv @ 15T, 1x CC ICE 75, 1x Mini vStabi 5.2 pro, Edge 423 FBL Latten, Turnigy 6S 2650mAh 40C/Gens Ace 6S 2600mAh 25C
112. Micha (Schmusebaer61) Plaste 500 FBL, Scorpion 880KV, Kontronik Jazz 80, 3 x Savox SH-1350, Graupner DS 8900G am Heck, Blätter SAB / Alin 3G, BeastX 3.0, Fusuno CFK Finne, Lipoblitzer, Turnigy 6S 3000
113. Robert (delta-hotel) Protos 500 CFK FBL, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x BLS 251, V-Stabi 5.2 Pro, Turnigy 3300 6S nano-tech
114. Tom (tomtom77) Prôtos 500 Plaste FBL, Scorpion 880KV, YGE 60A V4, 3x Graupner DES678, 1x DES 578, 3GX, Turnigy 5s 3600er
115. Manuel (roehrig), PlasteProtos / Beast mit nur 1xDSMX-Satellit, Motor 3026-880Kv und YGE 60A, TS-Servos: Graupner DES 676 BB, Heckservo: Graupner DS 8900 G, Funke: DX6i, Akku: 7S1-A123 2300mAh, 1750U/min = über 10Min Flugzeit = 1800 - 2000mAh. (180-200mAh/min)
116. Onno: Plaste Streck-Prôtos, Stock Scorpion, Jive 80LV, 3x DS510, 1x SH12920MG, Beast, P-Ionen 3,2Ah, 12t am Motor, 18t am Heck, Spin Blades FBL
117. Benjamin (Almigurt) Plastik streck- Protos, Stock Motor, Yge60, 12T Ritzel, 18T Heck, HS5245MG(TS), BLS-254 am Heck, HT Dark-Magic 465mm, P-Ion 3200, µbeast
118. Michal (Michalp)Protos 500 Extrem(wurzer-heli Edition) 1,3 KG Fluggewicht-Scorp 3026-YGE 60 LV-15er Ritzel-Savöx sh 1250 TS-SH 1257 Heck-Radix 430 FBL-MSH Brain 2200 Roxxy ,(3-6s) Headspeed 1400(3D)- 3200(Smack)
119. Michal (michalp)Protos 500 Carbon , mks 9670a+, savox 1290,YGE 60,Scorp 3026-880,Radix 430 FBL,Mini VStabi pro ,Völtz 2600 65C , Headspeed 2700-3200
Dan0111

#258 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von Dan0111 »

1. Andre (trailblazer), Plastik, VStabi 5.0, MSH-FBL Set, SAB , Roxxy960, CC BEC, DS510, SH1290MG, Scorpion 880kv@14t, Canomod
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, Stockmotor, Hacker X70 SB Pro, 6S, MSH-Flypbarless, V-Stabi, 9650, 9257
5. Mario (mariokober) CFK von MSH, Scorpion, MSH 80A, TS: Savox, Microbeast, BLS251
6. Flo(torro) cfk-stretch, YGE80 (BEC auf 6V), CC BEC, HK3226 12N10P 6+5x1,25YY 15er ritzel, BLS153@7,5V, BLS251@6V, miniVS 5.2pro Gov
7. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
8.1 Tim (Timmey) Prôtos 500 Plaste : mini V-Stabi 4.0, HK3026-12N14P 5+4x1,18D 6S, 16t, YGE 80, 3x MKS DS9660A+, SAB 430, BLS251, CCBEC PRO @ 6,2v, Spektrum
8.2 Tim (Timmey) Prôtos 500 CFK streched: mini V-Stabi blue 5.1 PRO, HK3026-12N14P 5+5x1,12D, 14t, YGE 60, 3x 1250MG, EDGE 473, 1290MG, Spektrum
9. Patrick (Pat1802), Plaste mit Paddel
10. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
11.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
12. Jörg (Chorge), Plastik mit FBL-Eigenumbau (Alu Blatthalter, Mikado-Mitnehmer), V-Stabi, MSH 80A-Regler und Motor (15T), 3x DS510, BLS251, 6S
13. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
14. Christian (kowi) Plaste & Paddelkopf, MSH 26-10 + YGE60 an 6S & 14T, 3x Savöx SH-1350, SH-1290MG, LTG2100
15. Stephan (Whoostar) CFK und V-Stabi 4.0, 3x Savöx SH-1350, BLS251, Scoripon KV880 @ 14t, Jive60LV, 6s 20C - Gestreched auf 470er Latten
16. Alexander (sptotal) Plastik, V-Stabi 4.0, Scorpion 880kv, YGE60, DS510, SH-1290MG, 6s => ersetzt durch Nachfolger
17. Jens (IceOne) Plastik, Paddel, Scorpion 880kv, YGE 80, DS510 TS, Spartan DS760 + DS520, 6S 2650mAh Flightmaxx 30C
18. Christian (REX ) Plastikchassis, Stockmotor, Alignregler, Savox, Rockamp Gyro, Paddel, Blattschmied Jazz,
19. David (helidave) cfk chassi stock: Motor regler sab blätter ,3*hs 225BB ,1savox, ltg2100
20. Wolfgang (dschim) CFK, ohne Paddel, YGE, Stockmotor, µBeast, SAB
21. Horst (heli123) Plastik, Paddel, MSH Motor/Regler, Gy401/9257, SAB und Jazz Blattschmied, TS 5085MG, Tgy 2650 20-30C, ZippyH 2x3s 2200
22. Christian (hitch) CFK, AC-3X, Motor/Regler Stock, TS Savöx 1250, Heck Savöx 1290
23. Wolfgang (ER Corvulus) Plaste, Paddel, CC60 + Scorpion 880 an 15T, TS HS225, 2100+ 9257, GCT Jazz, NoName 6s 2450/25c
24. Thomas (TJsat) Plaste, Paddel, YGE 80; Stock, Savox, HC, 9257
25. Götz (Gogi) Kunststoff, Microbeast Scorpion 3026 1000KV, Roxxy 960 Regler, SAB Blätter, TS:Align DS510, Heck: BLS 251 A123 6S und 5S 3300er Lipos.
26. Onno (Taumel-Mac) Plastik, Stockmot, YGE-60, Gy 401, Alu-Rotorhalter, Alu-Heck, und latürnich: Paddel!
27. Frank (BoGSer) CFK, Stockregler, -motor, TS Savöx 1250MG, Heck Savöx 1257MG, V-Stabi 4, noch 6S A123
28. Andi (andiz) CFK, YGE 80, Savox, Scorpion 880, V-Stabi 4.0, SLS 6S 2500
29. Matthias (matt44), Plastik, YGE 60, TS: HS-225, Heck: Align DS-520, Baukastenmotor, Rockamp Gyro one, SLS 6S 2200/Zippy 20C 2650
30. Ben (fuci), Plastik, Align 60A Regler, GU-210, HS 225BB, 9257, Stockmotor und Paddelfuci
31. Stefan (stefan baum) Plastik, Mini V-Stabi, Roxxy,Motor: Scorpion 880KV, TS: 3x Savöx , Heck: S9257, Akkus: 2x 6S SLS ZX 2500 / 2x 6S Zippy 2650
32. Perrin CFK, YGE 60, MSH Motor, Spartan DS760 + DS520, 3x DS510, Ar6200, Akku: Turngiy 6s 30C 2650mAh
33. Memphiz, Roxxy 960-6, MSH Motor, LTG2100 + 9257, 3x DS510, Ar6200, Akku: Turnigy 6s 20C 3000mAh
34. Thomas (ToyoTom) Plastik, Paddel, Scorpion880, YGE80, DS760+Savox1357, TS Savox1350, 6S- 2650-20C
35. Andi (AndiYen) CFK, mini-VStabi, Jive 60, Scorpion 3026-880 14t, Savox 1350, S9254, 6S-2200-30C
36. Frank (Killroy-Tattoo) Plasik, Kontronik Motor, CFK Mikado Blätter, Yellow Tuning, Jazz 80, 225 BB Servos, 2,4 Ghz, Akkus: 3900 4S3P Konion
37. Ralf (ralfiboy) Plastik + orig.Fbl-Kopf mit µbeast, Stock-Motor, JetiSpin66, 3*DS510+SH1290MG, Jeti R6 mit MUI75A und 7s A123 SB-halbsym
38. Marcus (Schroedi) Plastik, Paddel, Scorpion HK-3026 1210kv, 15Z, YGE80, TS: HS-82MG, Savox 1357 + GY401, 4s3p Konion 3900 & 3300, Schulze alpha 8.35 35Mhz
39. Christian (Choplifter), CFK, MSH Motor, MSH Regler, Savox SH-1250MG, Spartan DS760 + 9254, Zippy 5s 3300mAh
40. Guillaume(gigi92), CFK, Scorpion 3026-880, Roxxy 960-6, Align DS 510, 3Digi+S9254, 6S Turnigy 2200mah 30C
41. Roland (Helifan.de), Plastik, Werksmotor und -Regler
42. Jörg (Pirol116), CFK Flybarless mit LOGO 400 Haube, befeuert von 6S 2600mAh, HK-3026-880kv, YGE80, 3x SAVÖX 1350, 1x SAVÖX 1257MG, Microbeast, FF7
43. Stefan (buz), Infinity CFK - Paddellos; 7s A123; CC Ice 100; Strecker 330.30; Savox; Jeti Duplex; MicroBeast
44. Daniel (Daniel Gonzalez) Plaste, VS 4.0, Savox 1350 und BLS 251, 880 Scorpion, Jive, 6S Turnigy 20C 2650er
45. Andi (Tieftaucher) CFK, Scorpion 880KV mit 14T, Savox1350, AC-3X mit 9254, Jazz80, SAB Red Devil, Logo 400 Haube
46. Dirk (Silverwing) Kunststoffchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, Mini V-Stabi 4.0, Rockamp Haube T-Rex 500 in Signalfarbe
47. Jan-Malte (Sundog) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-20C
48. Matthias (Matoz) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-30C
49. André (michael.myers) CFK, MSH-Motor, MSH-Regler, Align DS510, KDS-800 mit Savox SH-1290MG, Turnigy 2x3S 2650 30C
50. Jörg (Josche) CFK, MSH-Motor 13T, YGE 60, AC-3X, 3x Savox 1250, 1x BLS 251, ZIPPY 6s1p 3000mAh 20C, FF7, Unilog
51. Arnd (yacco), CFK, Scorpion HK-3026 1000 15T, Xetronic 70A, 3x FS-550 BB MG, 1x MKS DS8910, µBeast, 5S 3000/3300 mAh, MX16 mit Assan 2G4
52. Mike (justhelicopters), Kunststoffchassis, Scorpion 880, Jazz 80-6-18, Futaba S9650 u. S9657, Mini VStabi, SLS ZX 2500 30C
53. Holger (Idefix), Kunststoffchassis, Roxxy960-6, Scorpion 3026 5+5x1,12D 750KV + 17R. ,Blattschmied GCT-Ultra-Acro, DES 658 BB/MG, Futaba S9254, Mini V-Stabi, CC Bec 6V, 6S 2200mah 30-40C, MX22 mit Spekrtum DM9
54. Armin (pelzebub) Plastik, Scorpion 880, CC ICE 75, 3x Align DS510, Spartan Quark+JR8900G, FF7, Akku wahrscheinlich 6s LiFe
55. Steven (b3nJi) Protos CFK, 3xSavöx SH-1350, 1xAlign ds620, MICROBEAST, YGE120, HK3026-12N14P 5+4x1,18D 840kV 17Z, 6S 2650 30C und en Mini Protos :-]
56. Jürgen (Kupfer) Protos CFK SE, Scorpion HK3026 12N14P 5+4x1.18D, MSH 80A +CC BEC, Microbeast, SAB 470, 3x Hyperion DH16-SCD, 1x Hyperion DH16-GCD, Turnigy nano-tech 6S 2,65Ah
57. Chris (pepto) Protos CFK, MSH Regler und Motor @15T, SAB/KBDD Blades, 3x Align DS510, Savox SH1290MG, AC-3X/3Digi, Turnigy 2650mAh 20/30C
58. Timo (PeterLustich) Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, Spartan DS760, 2xTurnigy 2650 mAh 30C
59. TOM (tombof3a), Protos Plastik, Paddel, Stock Motor, Hacker SB70 Regler, SAB, 3xHS225BB, 1x Futaba 9257, Rockampgyro, 2x 3S SLS EP 2650 mAh 30C
60. Klaus (worldofmaya), Protos Kunststoff , Rigid, Stock Motor, YGE 80LV, Maniac, 3x Futaba 9650, 1x Futaba BLS251, VStabi v4, 5s Turnigy 3600 30C, 6s Turnigy 3000 30C
61. Daniel (don-omar) ->>>STRECH+ Logo 400Canopy, 3x MKS DS 9660 A+, Roxxy 9-100, Scorpion 880, microBeast, S9254, 2200er Rockamps
62. Thilo (kilothilo) Protos CFK, Jazz 80, TS S9650, Heck BLS254, Gy-520, Stock Motor, SAB Blätter (noch mit Ruderkopf )
63. Sebastian (zamb0) - Protos CFK, Jazz 80, HS-5245MG, Spartan, BLS 251, Blattschmied/SAB, 2x A123 7s1p und Krückstock
64. Mike (Raptor-Spy) Protos CFK, Stock Antrieb, Align 510 TS Servos, heckservo Futaba S9256, Stock SAB Blätter, Stabi System MicroBeast wenn es mal da ist, 6S 2650 Turnigys
65. Alexander(ali.k.) Protos CFK, MSH-Regler, MSH-Motor (14T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1290MG, Rockamp Gyro One, 6S Rhino 2250 25C
66. Markus (electron6), Protos CFK, MSH-Regler, MSH-Motor, SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
67. Jonas (Provotroll) : Plaste-Stretch-Prôtos, Torro-Croco, Mini V-Stabi, YGE 60, 3 x Savöx SH-1350, Futaba S9257, Futaba R617FS, 470mm SABs, 3Ks, Microhelis Seitenleitwerk
68. Mike (taucherle): Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1357, paddellos System MicroBeast, 6S 2650 Turnigys
69. Adrian (wildcat): Protos normal, Jive 80LV, Scorpion 880, SAB-Blätter mit Protos-Holo, FBL - Microbeast, 6S 2650 Turnigy's
70. Micha (mozart1982): Protos Carbon, YGE 60, Scorpion 880, Vstabi 5.0, Savox, 14T, Rockamp Lipos
71. Frank (Fränky): Protos CFK, MSH Scorpion 880 KV, 15 T, MSH YGE-60, 4x DES676 BB, MicroBeast, MSH SAB Blätter, 6S 2200 P- LiFe
72. Chris (Chris_D): Protos Carbon mit MSH FBL Umbau, YGE60, Scorpion 880, SAB, Savox 1350, Align DS650, Microbeast, R617FS, 6S Turnigy 2200 30/40C
73. Hardy (Winnihardy): Protos Carbon; FBL Umbau MSH; Scorpion 880; YGE- 60, SAB; Savox 1350; Savox 1290; Microbeast; 6s Turnigy 2200 25c
74.Ingo ( Plextor ) Protos Kunststoff , Orginal Motor , 3x HS225Hb, 1 , S9650 , LTG2100 , SAB , 2 x 3 S 2650 Turnigy , YGE 60
75. -Flo- , Plastik, YGE 60, Scorpion 880kV, GP780, SH-1250MG, SH-1257MG, Turnigy 6S 2650mAh 30C
76. Matthias (foxi): Protos Kunststoff, MSH Scorpion 880 KV, 15 T, MSH YGE-60, DES676 BB, GY-401,5S 3000 Zippy
77.Jörg(Askalon) Plastik, MSH Scorpion 880kv,14er ,yge 60, savox sh1250mg,mini-Vstabi, Savox 1290mg,Sab red Devil,futaba 6106HF,Rockamp 6S 30C 2600
78. Jürg (Schletzer), Protos CFK, YGE-60, Scorpion 880kV, SAB Blätter, 3x Savox SH-1250MG, 1x Savox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
79.Tilo (Pegasus) Plaste Protos,MSH Motor Scorpion 880,YGE 60 regler,SAB Latten,Paddellos mit Microbeast, 6S 2200er LiFePo, Savox-metallgetriebelchen
80.Dominik 2 Stück CFKmit Jeti Duplex: Einer Microbeast mit Radix, Savox1350 an TS und FS555BB, YGE80 an MSH Stock, der andere mit DES676 an TS, Gy401 u 9254, Roxxy 960 an Scorpion 3026 und Spinblades demnächst im PET-Rumpf...
81.Ludwig (Lud-wig) Protos Kunststoff, Hughes 500 D Rumpf, Scorpion 1000 KV, 15 T, Hacker X-70 Pro, SAB Blätter, 3xHitec HS 85BB, 1xRobbe FS550 Carbon Digi, GY-401, 4s SLS 4000
82 .Uwe (ueber30) Protos Kunststoff, Scorpion 880 KV 14er Ritzel,Roxxy 960-6 ,3x Align DS 510 , GP 750 / 9254 , Turnigy 6S 2650 20C oder 7S LiFe
83. Gernot (Outrunner) Protos CFK, Scorpion 880 KV 14er Ritzel, YGE 60, 3x Savöx 1250MG, Microbeast / Savöx 1290MG, SLS APL 5S 3300 30C+
84. Fabian (Colonia), Protos CFK, Scorpion 880KV, Jive 80Lv, 3x Savöx 1250MG, Microbeast, Savöx 1290MG, 6S
85. Thomas (Tom.Thelis) Protos Kunststoff, Scorpion 880KV, 14T, YGE 60, 3x Savox SH-1250MG, GY-520 mit BLS254, Turnigy 6S 2450mAh 30C, Spinblades HS
86. Robert (R013ert) Protos CFK Stretch FBL, Scorpion 3026 12n8p 5+4d, 15T, YGE 60, Castle Creations BEC, 3x Align DS510 @ 7.0v , Mini V-Stabi Blueline mit 2 Spektrum Sats, Savox SH-1290mg @ 6.2V, SAB 470mm und KBDB Heckblätter
87. Thomas(Tomp), Plastik, Scorpion, YGE, SAB, Savox, Team Orion, Mini Stabi Blueline Express, Turnigy 2650 20C
88. Peter ( Pietbaer ), Protos Kunststoff, Scorpion 880 KV, Regler YGE 60A, 15er Ritzel, TS 3x Savöx 1350, Heck Savöx 1357, GY-401, Blätter SAB, SLS APL 6S 2650 mAh 30C+, DX 8
89 Marius, Protos CFK, Scorpion 880kv, Regler YGE 60A, TS: Savöx 1350, Heck: Savöx 1290MG, Microbeast 2.0, Blätter: SAB, Turnigy 2650 20C, Sender: Graupner MX-22 mit Raast Modul Empfänger: Futaba FS617
90. Frank (phoenix7), Protos CFK FBL, Scorpion (Stock), YGE 60A, TS: SAVÖX 1250MG, Heck: SAVÖX 1257MG, V-Stabi Mini 5.2 Pro, Blätter: Spinblades FBL, Turnigy 3000 20C, WK2801 Pro
91.Benjamin(Ben), Plaste Protos,MSH Fbl Kopf und Microbeast V2, Scorpion 880 mit 15T Ritzel,Simprop Magic 62H,TS:Futaba 9650,Heck Savöx 1290MG, Blätter: Blattschmied Ultra FBL,Turnigy 6S 2650 Lipo[/quote]
92.ChainMan, Protos Kunststoff, Scorpion 880KV, YGE 60, 3x Savox SH-1250MG, Savox 1257MG, MSH Fbl Kopf, Mini Stabi Blueline 5.1, SAB + Heck Original, Turnigy 6S 2450mAh 20C + Thunder Power 6S 2700er 30C.
93. the-fallen, Protos CFK, "Castle ICE Lite 100" Regler mit Datenlogger, "Castle 10A" BEC, TS-Servo: Align510, Heck: Futaba BL251, MicroBeast, Rest ist Standard
94. Markusgu, Protos CFK,yge80,1257 Heck, 9650 ts, nanotec 6s,gy520
95. Frank(Crusty77), Protos Plaste,MSH Motor 880KV, YGE60, 3x DES676BB, 1357SH, MSH FBL Kopf, Microbeast V2, Blätter: Helitec + Heck Original, Life 6s 2200mAh
96. Michl (dilg), Protos Kunststoff, Scorpion 880 KV 14er Ritzel, Yge60, 3x Robbe FS 550 CD + Hitec 6965, v-stabi, Kokam 5s 3200/Turnigy 6S 2650
97. Sven (slevin), Prôtos Kunststoff, Scorpion 3026-880, YGE 60, 3x Savöx SH-1250MG + Futaba S9257, Align GP-780, SAB, 6S A123
98. Alex (Alex2707) Protos CFK stretched @ 8,0V, Scorpion 3026-880, Roxxy 9100-6, 3x Hyperion DH16-SCD + Hyperion DH20X-GCD, CastleCreations BEC @ 8,0V, Microbeast 3.0.8, EDGE 473mm FBL, Radix Heckblätter, Turnigy 6S 3000mah
99. Stefan ( ESPler ) Protos CFK Stretch @ 8,4V, CC-BEC 10A, 3026- 880, Roxxy 9100-6, 3x Hyperion DH16-SCD, Heck Hyperion DH20X-GCD, Microbeast 3.08. SAB RedDevil 465 mm Umbau 03.10.2011
100. Stefan ( forrest ) Protos CFK Stretched , MSH 880Kv, YGE 80A, 3x Savöx SH-1250MG , 1x Savöx SH1290-MG am Heck, Microbeast V3, Turnigy 2650 6s, GensAce 2600 6s, SAB 470mm
101. Kiba, Protos CFK, Scorpion 880KV, YGE60A, 3x Savöx 1350, 1x Savöx SH1290MG am Heck, Vstabi 5.2 Pro, SLS 2650 6s Eco, SAB - SB - Radix 430mm
102. Ayhan ( paranoid007 ) Protos CFK, 820, Roxxy 9100-6, 3x Align DS510, Heck Savox SH1290, Microbeast, Blattschmied + Edge 473 für Stretch
103. Frank, Protos CFK, Scorpion 880KV, Jive60, 3x Savöx 1350, 1x BLS 251 am Heck, Vstabi 5.1 Pro, Turnigy 5S, Blattschmied
104. Jens (heli_junkie), Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Graupner DES 676 BB, 1x Savöx SH1290MG, Mini VStabi 5.2 Pro, Turnigy 6S 2650mAh 40c, SAB 430m
105. Manuel (Manuel-P) Protos 500 Plstik, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Turnigy 6S 3000mAh, 425er SAB Latten
106. Alex (Tatum) Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, BeastX, Turnigy 6S 2650mAh 20c, SAB 430
107. Daniel (Daniel...) Protos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Gensace 6S 2600mAh 25C, SAB
108. Olaf12: Protos 500 CFK FBL; Strecker Motor; 12er Ritzel, 18er Alu-Heckritzel; Kontronik Jazz 80; TS Futaba S9650; Heck BLS254; 6S 2600 SLS 35C; Blattschmied Ultra FBL 430mm; GyroBot 900; R608FS
109. Luca (MrHeli33) Protos 500 Plastik, 15er Ritzel, Stock Motor, MSH 80A, 3mal Graupner Des 658 BB MG, Heck S9257 ( vielleicht werde ich das Kds N690 mal als Heckservo verwenden, Modellexxpert 2600mah/30C(Withe line) Torison 430mm, Align 3Gx, Graupner MX-20 Hott
110. Basti (vierfuffzig) Plaste 500, alles Stock, 3 x KDS N580, Heck KDS N690, MiniVStabi
111. Basti (Yaku79) Plaste 500 FBL, 3x Hyperion Atlas HP-DH16-SCD @7V, 1x Hyperion Atlas HP-DH20x-GCD @7V, 1x Scorpion HK 3026-1400 umgewickelt bei Torro auf 1030kv @ 15T, 1x CC ICE 75, 1x Mini vStabi 5.2 pro, Edge 423 FBL Latten, Turnigy 6S 2650mAh 40C/Gens Ace 6S 2600mAh 25C
112. Micha (Schmusebaer61) Plaste 500 FBL, Scorpion 880KV, Kontronik Jazz 80, 3 x Savox SH-1350, Graupner DS 8900G am Heck, Blätter SAB / Alin 3G, BeastX 3.0, Fusuno CFK Finne, Lipoblitzer, Turnigy 6S 3000
113. Robert (delta-hotel) Protos 500 CFK FBL, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x BLS 251, V-Stabi 5.2 Pro, Turnigy 3300 6S nano-tech
114. Tom (tomtom77) Prôtos 500 Plaste FBL, Scorpion 880KV, YGE 60A V4, 3x Graupner DES678, 1x DES 578, 3GX, Turnigy 5s 3600er
115. Manuel (roehrig), PlasteProtos / Beast mit nur 1xDSMX-Satellit, Motor 3026-880Kv und YGE 60A, TS-Servos: Graupner DES 676 BB, Heckservo: Graupner DS 8900 G, Funke: DX6i, Akku: 7S1-A123 2300mAh, 1750U/min = über 10Min Flugzeit = 1800 - 2000mAh. (180-200mAh/min)
116. Onno: Plaste Streck-Prôtos, Stock Scorpion, Jive 80LV, 3x DS510, 1x SH12920MG, Beast, P-Ionen 3,2Ah, 12t am Motor, 18t am Heck, Spin Blades FBL
117. Benjamin (Almigurt) Plastik streck- Protos, Stock Motor, Yge60, 12T Ritzel, 18T Heck, HS5245MG(TS), BLS-254 am Heck, HT Dark-Magic 465mm, P-Ion 3200, µbeast
118. Michal (Michalp)Protos 500 Extrem(wurzer-heli Edition) 1,3 KG Fluggewicht-Scorp 3026-YGE 60 LV-15er Ritzel-Savöx sh 1250 TS-SH 1257 Heck-Radix 430 FBL-MSH Brain 2200 Roxxy ,(3-6s) Headspeed 1400(3D)- 3200(Smack)
119. Michal (michalp)Protos 500 Carbon , mks 9670a+, savox 1290,YGE 60,Scorp 3026-880,Radix 430 FBL,Mini VStabi pro ,Völtz 2600 65C , Headspeed 2700-3200
120. Daniel (Dan0111)Protos 500 Plastik, TS Graupner HBS 660, Heck HBS 690, YGE 90 mit V-Stabi Gov im Gebrauch, Motor Stock, SAB 430 FBL, Mini V-Stabi Pro, Turnigy Nanotech 2650 35C, Headspeed 2300 -3000
Heiko72
Beiträge: 1
Registriert: 27.12.2012 18:16:13

#259 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von Heiko72 »

1. Andre (trailblazer), Plastik, VStabi 5.0, MSH-FBL Set, SAB , Roxxy960, CC BEC, DS510, SH1290MG, Scorpion 880kv@14t, Canomod
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, Stockmotor, Hacker X70 SB Pro, 6S, MSH-Flypbarless, V-Stabi, 9650, 9257
5. Mario (mariokober) CFK von MSH, Scorpion, MSH 80A, TS: Savox, Microbeast, BLS251
6. Flo(torro) cfk-stretch, YGE80 (BEC auf 6V), CC BEC, HK3226 12N10P 6+5x1,25YY 15er ritzel, BLS153@7,5V, BLS251@6V, miniVS 5.2pro Gov
7. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
8.1 Tim (Timmey) Prôtos 500 Plaste : mini V-Stabi 4.0, HK3026-12N14P 5+4x1,18D 6S, 16t, YGE 80, 3x MKS DS9660A+, SAB 430, BLS251, CCBEC PRO @ 6,2v, Spektrum
8.2 Tim (Timmey) Prôtos 500 CFK streched: mini V-Stabi blue 5.1 PRO, HK3026-12N14P 5+5x1,12D, 14t, YGE 60, 3x 1250MG, EDGE 473, 1290MG, Spektrum
9. Patrick (Pat1802), Plaste mit Paddel
10. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
11.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
12. Jörg (Chorge), Plastik mit FBL-Eigenumbau (Alu Blatthalter, Mikado-Mitnehmer), V-Stabi, MSH 80A-Regler und Motor (15T), 3x DS510, BLS251, 6S
13. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
14. Christian (kowi) Plaste & Paddelkopf, MSH 26-10 + YGE60 an 6S & 14T, 3x Savöx SH-1350, SH-1290MG, LTG2100
15. Stephan (Whoostar) CFK und V-Stabi 4.0, 3x Savöx SH-1350, BLS251, Scoripon KV880 @ 14t, Jive60LV, 6s 20C - Gestreched auf 470er Latten
16. Alexander (sptotal) Plastik, V-Stabi 4.0, Scorpion 880kv, YGE60, DS510, SH-1290MG, 6s => ersetzt durch Nachfolger
17. Jens (IceOne) Plastik, Paddel, Scorpion 880kv, YGE 80, DS510 TS, Spartan DS760 + DS520, 6S 2650mAh Flightmaxx 30C
18. Christian (REX ) Plastikchassis, Stockmotor, Alignregler, Savox, Rockamp Gyro, Paddel, Blattschmied Jazz,
19. David (helidave) cfk chassi stock: Motor regler sab blätter ,3*hs 225BB ,1savox, ltg2100
20. Wolfgang (dschim) CFK, ohne Paddel, YGE, Stockmotor, µBeast, SAB
21. Horst (heli123) Plastik, Paddel, MSH Motor/Regler, Gy401/9257, SAB und Jazz Blattschmied, TS 5085MG, Tgy 2650 20-30C, ZippyH 2x3s 2200
22. Christian (hitch) CFK, AC-3X, Motor/Regler Stock, TS Savöx 1250, Heck Savöx 1290
23. Wolfgang (ER Corvulus) Plaste, Paddel, CC60 + Scorpion 880 an 15T, TS HS225, 2100+ 9257, GCT Jazz, NoName 6s 2450/25c
24. Thomas (TJsat) Plaste, Paddel, YGE 80; Stock, Savox, HC, 9257
25. Götz (Gogi) Kunststoff, Microbeast Scorpion 3026 1000KV, Roxxy 960 Regler, SAB Blätter, TS:Align DS510, Heck: BLS 251 A123 6S und 5S 3300er Lipos.
26. Onno (Taumel-Mac) Plastik, Stockmot, YGE-60, Gy 401, Alu-Rotorhalter, Alu-Heck, und latürnich: Paddel!
27. Frank (BoGSer) CFK, Stockregler, -motor, TS Savöx 1250MG, Heck Savöx 1257MG, V-Stabi 4, noch 6S A123
28. Andi (andiz) CFK, YGE 80, Savox, Scorpion 880, V-Stabi 4.0, SLS 6S 2500
29. Matthias (matt44), Plastik, YGE 60, TS: HS-225, Heck: Align DS-520, Baukastenmotor, Rockamp Gyro one, SLS 6S 2200/Zippy 20C 2650
30. Ben (fuci), Plastik, Align 60A Regler, GU-210, HS 225BB, 9257, Stockmotor und Paddelfuci
31. Stefan (stefan baum) Plastik, Mini V-Stabi, Roxxy,Motor: Scorpion 880KV, TS: 3x Savöx , Heck: S9257, Akkus: 2x 6S SLS ZX 2500 / 2x 6S Zippy 2650
32. Perrin CFK, YGE 60, MSH Motor, Spartan DS760 + DS520, 3x DS510, Ar6200, Akku: Turngiy 6s 30C 2650mAh
33. Memphiz, Roxxy 960-6, MSH Motor, LTG2100 + 9257, 3x DS510, Ar6200, Akku: Turnigy 6s 20C 3000mAh
34. Thomas (ToyoTom) Plastik, Paddel, Scorpion880, YGE80, DS760+Savox1357, TS Savox1350, 6S- 2650-20C
35. Andi (AndiYen) CFK, mini-VStabi, Jive 60, Scorpion 3026-880 14t, Savox 1350, S9254, 6S-2200-30C
36. Frank (Killroy-Tattoo) Plasik, Kontronik Motor, CFK Mikado Blätter, Yellow Tuning, Jazz 80, 225 BB Servos, 2,4 Ghz, Akkus: 3900 4S3P Konion
37. Ralf (ralfiboy) Plastik + orig.Fbl-Kopf mit µbeast, Stock-Motor, JetiSpin66, 3*DS510+SH1290MG, Jeti R6 mit MUI75A und 7s A123 SB-halbsym
38. Marcus (Schroedi) Plastik, Paddel, Scorpion HK-3026 1210kv, 15Z, YGE80, TS: HS-82MG, Savox 1357 + GY401, 4s3p Konion 3900 & 3300, Schulze alpha 8.35 35Mhz
39. Christian (Choplifter), CFK, MSH Motor, MSH Regler, Savox SH-1250MG, Spartan DS760 + 9254, Zippy 5s 3300mAh
40. Guillaume(gigi92), CFK, Scorpion 3026-880, Roxxy 960-6, Align DS 510, 3Digi+S9254, 6S Turnigy 2200mah 30C
41. Roland (Helifan.de), Plastik, Werksmotor und -Regler
42. Jörg (Pirol116), CFK Flybarless mit LOGO 400 Haube, befeuert von 6S 2600mAh, HK-3026-880kv, YGE80, 3x SAVÖX 1350, 1x SAVÖX 1257MG, Microbeast, FF7
43. Stefan (buz), Infinity CFK - Paddellos; 7s A123; CC Ice 100; Strecker 330.30; Savox; Jeti Duplex; MicroBeast
44. Daniel (Daniel Gonzalez) Plaste, VS 4.0, Savox 1350 und BLS 251, 880 Scorpion, Jive, 6S Turnigy 20C 2650er
45. Andi (Tieftaucher) CFK, Scorpion 880KV mit 14T, Savox1350, AC-3X mit 9254, Jazz80, SAB Red Devil, Logo 400 Haube
46. Dirk (Silverwing) Kunststoffchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, Mini V-Stabi 4.0, Rockamp Haube T-Rex 500 in Signalfarbe
47. Jan-Malte (Sundog) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-20C
48. Matthias (Matoz) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-30C
49. André (michael.myers) CFK, MSH-Motor, MSH-Regler, Align DS510, KDS-800 mit Savox SH-1290MG, Turnigy 2x3S 2650 30C
50. Jörg (Josche) CFK, MSH-Motor 13T, YGE 60, AC-3X, 3x Savox 1250, 1x BLS 251, ZIPPY 6s1p 3000mAh 20C, FF7, Unilog
51. Arnd (yacco), CFK, Scorpion HK-3026 1000 15T, Xetronic 70A, 3x FS-550 BB MG, 1x MKS DS8910, µBeast, 5S 3000/3300 mAh, MX16 mit Assan 2G4
52. Mike (justhelicopters), Kunststoffchassis, Scorpion 880, Jazz 80-6-18, Futaba S9650 u. S9657, Mini VStabi, SLS ZX 2500 30C
53. Holger (Idefix), Kunststoffchassis, Roxxy960-6, Scorpion 3026 5+5x1,12D 750KV + 17R. ,Blattschmied GCT-Ultra-Acro, DES 658 BB/MG, Futaba S9254, Mini V-Stabi, CC Bec 6V, 6S 2200mah 30-40C, MX22 mit Spekrtum DM9
54. Armin (pelzebub) Plastik, Scorpion 880, CC ICE 75, 3x Align DS510, Spartan Quark+JR8900G, FF7, Akku wahrscheinlich 6s LiFe
55. Steven (b3nJi) Protos CFK, 3xSavöx SH-1350, 1xAlign ds620, MICROBEAST, YGE120, HK3026-12N14P 5+4x1,18D 840kV 17Z, 6S 2650 30C und en Mini Protos :-]
56. Jürgen (Kupfer) Protos CFK SE, Scorpion HK3026 12N14P 5+4x1.18D, MSH 80A +CC BEC, Microbeast, SAB 470, 3x Hyperion DH16-SCD, 1x Hyperion DH16-GCD, Turnigy nano-tech 6S 2,65Ah
57. Chris (pepto) Protos CFK, MSH Regler und Motor @15T, SAB/KBDD Blades, 3x Align DS510, Savox SH1290MG, AC-3X/3Digi, Turnigy 2650mAh 20/30C
58. Timo (PeterLustich) Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, Spartan DS760, 2xTurnigy 2650 mAh 30C
59. TOM (tombof3a), Protos Plastik, Paddel, Stock Motor, Hacker SB70 Regler, SAB, 3xHS225BB, 1x Futaba 9257, Rockampgyro, 2x 3S SLS EP 2650 mAh 30C
60. Klaus (worldofmaya), Protos Kunststoff , Rigid, Stock Motor, YGE 80LV, Maniac, 3x Futaba 9650, 1x Futaba BLS251, VStabi v4, 5s Turnigy 3600 30C, 6s Turnigy 3000 30C
61. Daniel (don-omar) ->>>STRECH+ Logo 400Canopy, 3x MKS DS 9660 A+, Roxxy 9-100, Scorpion 880, microBeast, S9254, 2200er Rockamps
62. Thilo (kilothilo) Protos CFK, Jazz 80, TS S9650, Heck BLS254, Gy-520, Stock Motor, SAB Blätter (noch mit Ruderkopf )
63. Sebastian (zamb0) - Protos CFK, Jazz 80, HS-5245MG, Spartan, BLS 251, Blattschmied/SAB, 2x A123 7s1p und Krückstock
64. Mike (Raptor-Spy) Protos CFK, Stock Antrieb, Align 510 TS Servos, heckservo Futaba S9256, Stock SAB Blätter, Stabi System MicroBeast wenn es mal da ist, 6S 2650 Turnigys
65. Alexander(ali.k.) Protos CFK, MSH-Regler, MSH-Motor (14T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1290MG, Rockamp Gyro One, 6S Rhino 2250 25C
66. Markus (electron6), Protos CFK, MSH-Regler, MSH-Motor, SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
67. Jonas (Provotroll) : Plaste-Stretch-Prôtos, Torro-Croco, Mini V-Stabi, YGE 60, 3 x Savöx SH-1350, Futaba S9257, Futaba R617FS, 470mm SABs, 3Ks, Microhelis Seitenleitwerk
68. Mike (taucherle): Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1357, paddellos System MicroBeast, 6S 2650 Turnigys
69. Adrian (wildcat): Protos normal, Jive 80LV, Scorpion 880, SAB-Blätter mit Protos-Holo, FBL - Microbeast, 6S 2650 Turnigy's
70. Micha (mozart1982): Protos Carbon, YGE 60, Scorpion 880, Vstabi 5.0, Savox, 14T, Rockamp Lipos
71. Frank (Fränky): Protos CFK, MSH Scorpion 880 KV, 15 T, MSH YGE-60, 4x DES676 BB, MicroBeast, MSH SAB Blätter, 6S 2200 P- LiFe
72. Chris (Chris_D): Protos Carbon mit MSH FBL Umbau, YGE60, Scorpion 880, SAB, Savox 1350, Align DS650, Microbeast, R617FS, 6S Turnigy 2200 30/40C
73. Hardy (Winnihardy): Protos Carbon; FBL Umbau MSH; Scorpion 880; YGE- 60, SAB; Savox 1350; Savox 1290; Microbeast; 6s Turnigy 2200 25c
74.Ingo ( Plextor ) Protos Kunststoff , Orginal Motor , 3x HS225Hb, 1 , S9650 , LTG2100 , SAB , 2 x 3 S 2650 Turnigy , YGE 60
75. -Flo- , Plastik, YGE 60, Scorpion 880kV, GP780, SH-1250MG, SH-1257MG, Turnigy 6S 2650mAh 30C
76. Matthias (foxi): Protos Kunststoff, MSH Scorpion 880 KV, 15 T, MSH YGE-60, DES676 BB, GY-401,5S 3000 Zippy
77.Jörg(Askalon) Plastik, MSH Scorpion 880kv,14er ,yge 60, savox sh1250mg,mini-Vstabi, Savox 1290mg,Sab red Devil,futaba 6106HF,Rockamp 6S 30C 2600
78. Jürg (Schletzer), Protos CFK, YGE-60, Scorpion 880kV, SAB Blätter, 3x Savox SH-1250MG, 1x Savox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
79.Tilo (Pegasus) Plaste Protos,MSH Motor Scorpion 880,YGE 60 regler,SAB Latten,Paddellos mit Microbeast, 6S 2200er LiFePo, Savox-metallgetriebelchen
80.Dominik 2 Stück CFKmit Jeti Duplex: Einer Microbeast mit Radix, Savox1350 an TS und FS555BB, YGE80 an MSH Stock, der andere mit DES676 an TS, Gy401 u 9254, Roxxy 960 an Scorpion 3026 und Spinblades demnächst im PET-Rumpf...
81.Ludwig (Lud-wig) Protos Kunststoff, Hughes 500 D Rumpf, Scorpion 1000 KV, 15 T, Hacker X-70 Pro, SAB Blätter, 3xHitec HS 85BB, 1xRobbe FS550 Carbon Digi, GY-401, 4s SLS 4000
82 .Uwe (ueber30) Protos Kunststoff, Scorpion 880 KV 14er Ritzel,Roxxy 960-6 ,3x Align DS 510 , GP 750 / 9254 , Turnigy 6S 2650 20C oder 7S LiFe
83. Gernot (Outrunner) Protos CFK, Scorpion 880 KV 14er Ritzel, YGE 60, 3x Savöx 1250MG, Microbeast / Savöx 1290MG, SLS APL 5S 3300 30C+
84. Fabian (Colonia), Protos CFK, Scorpion 880KV, Jive 80Lv, 3x Savöx 1250MG, Microbeast, Savöx 1290MG, 6S
85. Thomas (Tom.Thelis) Protos Kunststoff, Scorpion 880KV, 14T, YGE 60, 3x Savox SH-1250MG, GY-520 mit BLS254, Turnigy 6S 2450mAh 30C, Spinblades HS
86. Robert (R013ert) Protos CFK Stretch FBL, Scorpion 3026 12n8p 5+4d, 15T, YGE 60, Castle Creations BEC, 3x Align DS510 @ 7.0v , Mini V-Stabi Blueline mit 2 Spektrum Sats, Savox SH-1290mg @ 6.2V, SAB 470mm und KBDB Heckblätter
87. Thomas(Tomp), Plastik, Scorpion, YGE, SAB, Savox, Team Orion, Mini Stabi Blueline Express, Turnigy 2650 20C
88. Peter ( Pietbaer ), Protos Kunststoff, Scorpion 880 KV, Regler YGE 60A, 15er Ritzel, TS 3x Savöx 1350, Heck Savöx 1357, GY-401, Blätter SAB, SLS APL 6S 2650 mAh 30C+, DX 8
89 Marius, Protos CFK, Scorpion 880kv, Regler YGE 60A, TS: Savöx 1350, Heck: Savöx 1290MG, Microbeast 2.0, Blätter: SAB, Turnigy 2650 20C, Sender: Graupner MX-22 mit Raast Modul Empfänger: Futaba FS617
90. Frank (phoenix7), Protos CFK FBL, Scorpion (Stock), YGE 60A, TS: SAVÖX 1250MG, Heck: SAVÖX 1257MG, V-Stabi Mini 5.2 Pro, Blätter: Spinblades FBL, Turnigy 3000 20C, WK2801 Pro
91.Benjamin(Ben), Plaste Protos,MSH Fbl Kopf und Microbeast V2, Scorpion 880 mit 15T Ritzel,Simprop Magic 62H,TS:Futaba 9650,Heck Savöx 1290MG, Blätter: Blattschmied Ultra FBL,Turnigy 6S 2650 Lipo[/quote]
92.ChainMan, Protos Kunststoff, Scorpion 880KV, YGE 60, 3x Savox SH-1250MG, Savox 1257MG, MSH Fbl Kopf, Mini Stabi Blueline 5.1, SAB + Heck Original, Turnigy 6S 2450mAh 20C + Thunder Power 6S 2700er 30C.
93. the-fallen, Protos CFK, "Castle ICE Lite 100" Regler mit Datenlogger, "Castle 10A" BEC, TS-Servo: Align510, Heck: Futaba BL251, MicroBeast, Rest ist Standard
94. Markusgu, Protos CFK,yge80,1257 Heck, 9650 ts, nanotec 6s,gy520
95. Frank(Crusty77), Protos Plaste,MSH Motor 880KV, YGE60, 3x DES676BB, 1357SH, MSH FBL Kopf, Microbeast V2, Blätter: Helitec + Heck Original, Life 6s 2200mAh
96. Michl (dilg), Protos Kunststoff, Scorpion 880 KV 14er Ritzel, Yge60, 3x Robbe FS 550 CD + Hitec 6965, v-stabi, Kokam 5s 3200/Turnigy 6S 2650
97. Sven (slevin), Prôtos Kunststoff, Scorpion 3026-880, YGE 60, 3x Savöx SH-1250MG + Futaba S9257, Align GP-780, SAB, 6S A123
98. Alex (Alex2707) Protos CFK stretched @ 8,0V, Scorpion 3026-880, Roxxy 9100-6, 3x Hyperion DH16-SCD + Hyperion DH20X-GCD, CastleCreations BEC @ 8,0V, Microbeast 3.0.8, EDGE 473mm FBL, Radix Heckblätter, Turnigy 6S 3000mah
99. Stefan ( ESPler ) Protos CFK Stretch @ 8,4V, CC-BEC 10A, 3026- 880, Roxxy 9100-6, 3x Hyperion DH16-SCD, Heck Hyperion DH20X-GCD, Microbeast 3.08. SAB RedDevil 465 mm Umbau 03.10.2011
100. Stefan ( forrest ) Protos CFK Stretched , MSH 880Kv, YGE 80A, 3x Savöx SH-1250MG , 1x Savöx SH1290-MG am Heck, Microbeast V3, Turnigy 2650 6s, GensAce 2600 6s, SAB 470mm
101. Kiba, Protos CFK, Scorpion 880KV, YGE60A, 3x Savöx 1350, 1x Savöx SH1290MG am Heck, Vstabi 5.2 Pro, SLS 2650 6s Eco, SAB - SB - Radix 430mm
102. Ayhan ( paranoid007 ) Protos CFK, 820, Roxxy 9100-6, 3x Align DS510, Heck Savox SH1290, Microbeast, Blattschmied + Edge 473 für Stretch
103. Frank, Protos CFK, Scorpion 880KV, Jive60, 3x Savöx 1350, 1x BLS 251 am Heck, Vstabi 5.1 Pro, Turnigy 5S, Blattschmied
104. Jens (heli_junkie), Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Graupner DES 676 BB, 1x Savöx SH1290MG, Mini VStabi 5.2 Pro, Turnigy 6S 2650mAh 40c, SAB 430m
105. Manuel (Manuel-P) Protos 500 Plstik, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Turnigy 6S 3000mAh, 425er SAB Latten
106. Alex (Tatum) Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, BeastX, Turnigy 6S 2650mAh 20c, SAB 430
107. Daniel (Daniel...) Protos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Gensace 6S 2600mAh 25C, SAB
108. Olaf12: Protos 500 CFK FBL; Strecker Motor; 12er Ritzel, 18er Alu-Heckritzel; Kontronik Jazz 80; TS Futaba S9650; Heck BLS254; 6S 2600 SLS 35C; Blattschmied Ultra FBL 430mm; GyroBot 900; R608FS
109. Luca (MrHeli33) Protos 500 Plastik, 15er Ritzel, Stock Motor, MSH 80A, 3mal Graupner Des 658 BB MG, Heck S9257 ( vielleicht werde ich das Kds N690 mal als Heckservo verwenden, Modellexxpert 2600mah/30C(Withe line) Torison 430mm, Align 3Gx, Graupner MX-20 Hott
110. Basti (vierfuffzig) Plaste 500, alles Stock, 3 x KDS N580, Heck KDS N690, MiniVStabi
111. Basti (Yaku79) Plaste 500 FBL, 3x Hyperion Atlas HP-DH16-SCD @7V, 1x Hyperion Atlas HP-DH20x-GCD @7V, 1x Scorpion HK 3026-1400 umgewickelt bei Torro auf 1030kv @ 15T, 1x CC ICE 75, 1x Mini vStabi 5.2 pro, Edge 423 FBL Latten, Turnigy 6S 2650mAh 40C/Gens Ace 6S 2600mAh 25C
112. Micha (Schmusebaer61) Plaste 500 FBL, Scorpion 880KV, Kontronik Jazz 80, 3 x Savox SH-1350, Graupner DS 8900G am Heck, Blätter SAB / Alin 3G, BeastX 3.0, Fusuno CFK Finne, Lipoblitzer, Turnigy 6S 3000
113. Robert (delta-hotel) Protos 500 CFK FBL, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x BLS 251, V-Stabi 5.2 Pro, Turnigy 3300 6S nano-tech
114. Tom (tomtom77) Prôtos 500 Plaste FBL, Scorpion 880KV, YGE 60A V4, 3x Graupner DES678, 1x DES 578, 3GX, Turnigy 5s 3600er
115. Manuel (roehrig), PlasteProtos / Beast mit nur 1xDSMX-Satellit, Motor 3026-880Kv und YGE 60A, TS-Servos: Graupner DES 676 BB, Heckservo: Graupner DS 8900 G, Funke: DX6i, Akku: 7S1-A123 2300mAh, 1750U/min = über 10Min Flugzeit = 1800 - 2000mAh. (180-200mAh/min)
116. Onno: Plaste Streck-Prôtos, Stock Scorpion, Jive 80LV, 3x DS510, 1x SH12920MG, Beast, P-Ionen 3,2Ah, 12t am Motor, 18t am Heck, Spin Blades FBL
117. Benjamin (Almigurt) Plastik streck- Protos, Stock Motor, Yge60, 12T Ritzel, 18T Heck, HS5245MG(TS), BLS-254 am Heck, HT Dark-Magic 465mm, P-Ion 3200, µbeast
118. Michal (Michalp)Protos 500 Extrem(wurzer-heli Edition) 1,3 KG Fluggewicht-Scorp 3026-YGE 60 LV-15er Ritzel-Savöx sh 1250 TS-SH 1257 Heck-Radix 430 FBL-MSH Brain 2200 Roxxy ,(3-6s) Headspeed 1400(3D)- 3200(Smack)
119. Michal (michalp)Protos 500 Carbon , mks 9670a+, savox 1290,YGE 60,Scorp 3026-880,Radix 430 FBL,Mini VStabi pro ,Völtz 2600 65C , Headspeed 2700-3200
120. Daniel (Dan0111)Protos 500 Plastik, TS Graupner HBS 660, Heck HBS 690, YGE 90 mit V-Stabi Gov im Gebrauch, Motor Stock, SAB 430 FBL, Mini V-Stabi Pro, Turnigy Nanotech 2650 35C, Headspeed 2300 -3000
121. Heiko (Heiko72) Protos 500 Plastik Flybar, Grauperner Servos auf TS, Apektrum am Heck, Motor Stock, Turnigy 3000 30C, Drehzahl 2500-3000
Benutzeravatar
asassin
Beiträge: 5931
Registriert: 13.03.2008 21:45:25
Wohnort: Bremen-Brinkum/Stuhr

#260 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von asassin »

  • 1. Andre (trailblazer), Plastik, VStabi 5.0, MSH-FBL Set, SAB , Roxxy960, CC BEC, DS510, SH1290MG, Scorpion 880kv@14t, Canomod
    2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
    3. Mario (Mario21) CFK noch mit Paddelstange
    4. Egbert (echo.zulu), Plaste, Stockmotor, Hacker X70 SB Pro, 6S, MSH-Flypbarless, V-Stabi, 9650, 9257
    5. Mario (mariokober) CFK von MSH, Scorpion, MSH 80A, TS: Savox, Microbeast, BLS251
    6. Flo(torro) cfk-stretch, YGE80 (BEC auf 6V), CC BEC, HK3226 12N10P 6+5x1,25YY 15er ritzel, BLS153@7,5V, BLS251@6V, miniVS 5.2pro Gov
    7. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
    8.1 Tim (Timmey) Prôtos 500 Plaste : mini V-Stabi 4.0, HK3026-12N14P 5+4x1,18D 6S, 16t, YGE 80, 3x MKS DS9660A+, SAB 430, BLS251, CCBEC PRO @ 6,2v, Spektrum
    8.2 Tim (Timmey) Prôtos 500 CFK streched: mini V-Stabi blue 5.1 PRO, HK3026-12N14P 5+5x1,12D, 14t, YGE 60, 3x 1250MG, EDGE 473, 1290MG, Spektrum
    9. Patrick (Pat1802), Plaste mit Paddel
    10. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
    11.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
    12. Jörg (Chorge), Plastik mit FBL-Eigenumbau (Alu Blatthalter, Mikado-Mitnehmer), V-Stabi, MSH 80A-Regler und Motor (15T), 3x DS510, BLS251, 6S
    13. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
    14. Christian (kowi) Plaste & Paddelkopf, MSH 26-10 + YGE60 an 6S & 14T, 3x Savöx SH-1350, SH-1290MG, LTG2100
    15. Stephan (Whoostar) CFK und V-Stabi 4.0, 3x Savöx SH-1350, BLS251, Scoripon KV880 @ 14t, Jive60LV, 6s 20C - Gestreched auf 470er Latten
    16. Alexander (sptotal) Plastik, V-Stabi 4.0, Scorpion 880kv, YGE60, DS510, SH-1290MG, 6s => ersetzt durch Nachfolger
    17. Jens (IceOne) Plastik, Paddel, Scorpion 880kv, YGE 80, DS510 TS, Spartan DS760 + DS520, 6S 2650mAh Flightmaxx 30C
    18. Christian (REX ) Plastikchassis, Stockmotor, Alignregler, Savox, Rockamp Gyro, Paddel, Blattschmied Jazz,
    19. David (helidave) cfk chassi stock: Motor regler sab blätter ,3*hs 225BB ,1savox, ltg2100
    20. Wolfgang (dschim) CFK, ohne Paddel, YGE, Stockmotor, µBeast, SAB
    21. Horst (heli123) Plastik, Paddel, MSH Motor/Regler, Gy401/9257, SAB und Jazz Blattschmied, TS 5085MG, Tgy 2650 20-30C, ZippyH 2x3s 2200
    22. Christian (hitch) CFK, AC-3X, Motor/Regler Stock, TS Savöx 1250, Heck Savöx 1290
    23. Wolfgang (ER Corvulus) Plaste, Paddel, CC60 + Scorpion 880 an 15T, TS HS225, 2100+ 9257, GCT Jazz, NoName 6s 2450/25c
    24. Thomas (TJsat) Plaste, Paddel, YGE 80; Stock, Savox, HC, 9257
    25. Götz (Gogi) Kunststoff, Microbeast Scorpion 3026 1000KV, Roxxy 960 Regler, SAB Blätter, TS:Align DS510, Heck: BLS 251 A123 6S und 5S 3300er Lipos.
    26. Onno (Taumel-Mac) Plastik, Stockmot, YGE-60, Gy 401, Alu-Rotorhalter, Alu-Heck, und latürnich: Paddel!
    27. Frank (BoGSer) CFK, Stockregler, -motor, TS Savöx 1250MG, Heck Savöx 1257MG, V-Stabi 4, noch 6S A123
    28. Andi (andiz) CFK, YGE 80, Savox, Scorpion 880, V-Stabi 4.0, SLS 6S 2500
    29. Matthias (matt44), Plastik, YGE 60, TS: HS-225, Heck: Align DS-520, Baukastenmotor, Rockamp Gyro one, SLS 6S 2200/Zippy 20C 2650
    30. Ben (fuci), Plastik, Align 60A Regler, GU-210, HS 225BB, 9257, Stockmotor und Paddelfuci
    31. Stefan (stefan baum) Plastik, Mini V-Stabi, Roxxy,Motor: Scorpion 880KV, TS: 3x Savöx , Heck: S9257, Akkus: 2x 6S SLS ZX 2500 / 2x 6S Zippy 2650
    32. Perrin CFK, YGE 60, MSH Motor, Spartan DS760 + DS520, 3x DS510, Ar6200, Akku: Turngiy 6s 30C 2650mAh
    33. Memphiz, Roxxy 960-6, MSH Motor, LTG2100 + 9257, 3x DS510, Ar6200, Akku: Turnigy 6s 20C 3000mAh
    34. Thomas (ToyoTom) Plastik, Paddel, Scorpion880, YGE80, DS760+Savox1357, TS Savox1350, 6S- 2650-20C
    35. Andi (AndiYen) CFK, mini-VStabi, Jive 60, Scorpion 3026-880 14t, Savox 1350, S9254, 6S-2200-30C
    36. Frank (Killroy-Tattoo) Plasik, Kontronik Motor, CFK Mikado Blätter, Yellow Tuning, Jazz 80, 225 BB Servos, 2,4 Ghz, Akkus: 3900 4S3P Konion
    37. Ralf (ralfiboy) Plastik + orig.Fbl-Kopf mit µbeast, Stock-Motor, JetiSpin66, 3*DS510+SH1290MG, Jeti R6 mit MUI75A und 7s A123 SB-halbsym
    38. Marcus (Schroedi) Plastik, Paddel, Scorpion HK-3026 1210kv, 15Z, YGE80, TS: HS-82MG, Savox 1357 + GY401, 4s3p Konion 3900 & 3300, Schulze alpha 8.35 35Mhz
    39. Christian (Choplifter), CFK, MSH Motor, MSH Regler, Savox SH-1250MG, Spartan DS760 + 9254, Zippy 5s 3300mAh
    40. Guillaume(gigi92), CFK, Scorpion 3026-880, Roxxy 960-6, Align DS 510, 3Digi+S9254, 6S Turnigy 2200mah 30C
    41. Roland (Helifan.de), Plastik, Werksmotor und -Regler
    42. Jörg (Pirol116), CFK Flybarless mit LOGO 400 Haube, befeuert von 6S 2600mAh, HK-3026-880kv, YGE80, 3x SAVÖX 1350, 1x SAVÖX 1257MG, Microbeast, FF7
    43. Stefan (buz), Infinity CFK - Paddellos; 7s A123; CC Ice 100; Strecker 330.30; Savox; Jeti Duplex; MicroBeast
    44. Daniel (Daniel Gonzalez) Plaste, VS 4.0, Savox 1350 und BLS 251, 880 Scorpion, Jive, 6S Turnigy 20C 2650er
    45. Andi (Tieftaucher) CFK, Scorpion 880KV mit 14T, Savox1350, AC-3X mit 9254, Jazz80, SAB Red Devil, Logo 400 Haube
    46. Dirk (Silverwing) Kunststoffchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, Mini V-Stabi 4.0, Rockamp Haube T-Rex 500 in Signalfarbe
    47. Jan-Malte (Sundog) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-20C
    48. Matthias (Matoz) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-30C
    49. André (michael.myers) CFK, MSH-Motor, MSH-Regler, Align DS510, KDS-800 mit Savox SH-1290MG, Turnigy 2x3S 2650 30C
    50. Jörg (Josche) CFK, MSH-Motor 13T, YGE 60, AC-3X, 3x Savox 1250, 1x BLS 251, ZIPPY 6s1p 3000mAh 20C, FF7, Unilog
    51. Arnd (yacco), CFK, Scorpion HK-3026 1000 15T, Xetronic 70A, 3x FS-550 BB MG, 1x MKS DS8910, µBeast, 5S 3000/3300 mAh, MX16 mit Assan 2G4
    52. Mike (justhelicopters), Kunststoffchassis, Scorpion 880, Jazz 80-6-18, Futaba S9650 u. S9657, Mini VStabi, SLS ZX 2500 30C
    53. Holger (Idefix), Kunststoffchassis, Roxxy960-6, Scorpion 3026 5+5x1,12D 750KV + 17R. ,Blattschmied GCT-Ultra-Acro, DES 658 BB/MG, Futaba S9254, Mini V-Stabi, CC Bec 6V, 6S 2200mah 30-40C, MX22 mit Spekrtum DM9
    54. Armin (pelzebub) Plastik, Scorpion 880, CC ICE 75, 3x Align DS510, Spartan Quark+JR8900G, FF7, Akku wahrscheinlich 6s LiFe
    55. Steven (b3nJi) Protos CFK, 3xSavöx SH-1350, 1xAlign ds620, MICROBEAST, YGE120, HK3026-12N14P 5+4x1,18D 840kV 17Z, 6S 2650 30C und en Mini Protos :-]
    56. Jürgen (Kupfer) Protos CFK SE, Scorpion HK3026 12N14P 5+4x1.18D, MSH 80A +CC BEC, Microbeast, SAB 470, 3x Hyperion DH16-SCD, 1x Hyperion DH16-GCD, Turnigy nano-tech 6S 2,65Ah
    57. Chris (pepto) Protos CFK, MSH Regler und Motor @15T, SAB/KBDD Blades, 3x Align DS510, Savox SH1290MG, AC-3X/3Digi, Turnigy 2650mAh 20/30C
    58. Timo (PeterLustich) Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, Spartan DS760, 2xTurnigy 2650 mAh 30C
    59. TOM (tombof3a), Protos Plastik, Paddel, Stock Motor, Hacker SB70 Regler, SAB, 3xHS225BB, 1x Futaba 9257, Rockampgyro, 2x 3S SLS EP 2650 mAh 30C
    60. Klaus (worldofmaya), Protos Kunststoff , Rigid, Stock Motor, YGE 80LV, Maniac, 3x Futaba 9650, 1x Futaba BLS251, VStabi v4, 5s Turnigy 3600 30C, 6s Turnigy 3000 30C
    61. Daniel (don-omar) ->>>STRECH+ Logo 400Canopy, 3x MKS DS 9660 A+, Roxxy 9-100, Scorpion 880, microBeast, S9254, 2200er Rockamps
    62. Thilo (kilothilo) Protos CFK, Jazz 80, TS S9650, Heck BLS254, Gy-520, Stock Motor, SAB Blätter (noch mit Ruderkopf )
    63. Sebastian (zamb0) - Protos CFK, Jazz 80, HS-5245MG, Spartan, BLS 251, Blattschmied/SAB, 2x A123 7s1p und Krückstock
    64. Mike (Raptor-Spy) Protos CFK, Stock Antrieb, Align 510 TS Servos, heckservo Futaba S9256, Stock SAB Blätter, Stabi System MicroBeast wenn es mal da ist, 6S 2650 Turnigys
    65. Alexander(ali.k.) Protos CFK, MSH-Regler, MSH-Motor (14T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1290MG, Rockamp Gyro One, 6S Rhino 2250 25C
    66. Markus (electron6), Protos CFK, MSH-Regler, MSH-Motor, SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
    67. Jonas (Provotroll) : Plaste-Stretch-Prôtos, Torro-Croco, Mini V-Stabi, YGE 60, 3 x Savöx SH-1350, Futaba S9257, Futaba R617FS, 470mm SABs, 3Ks, Microhelis Seitenleitwerk
    68. Mike (taucherle): Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1357, paddellos System MicroBeast, 6S 2650 Turnigys
    69. Adrian (wildcat): Protos normal, Jive 80LV, Scorpion 880, SAB-Blätter mit Protos-Holo, FBL - Microbeast, 6S 2650 Turnigy's
    70. Micha (mozart1982): Protos Carbon, YGE 60, Scorpion 880, Vstabi 5.0, Savox, 14T, Rockamp Lipos
    71. Frank (Fränky): Protos CFK, MSH Scorpion 880 KV, 15 T, MSH YGE-60, 4x DES676 BB, MicroBeast, MSH SAB Blätter, 6S 2200 P- LiFe
    72. Chris (Chris_D): Protos Carbon mit MSH FBL Umbau, YGE60, Scorpion 880, SAB, Savox 1350, Align DS650, Microbeast, R617FS, 6S Turnigy 2200 30/40C
    73. Hardy (Winnihardy): Protos Carbon; FBL Umbau MSH; Scorpion 880; YGE- 60, SAB; Savox 1350; Savox 1290; Microbeast; 6s Turnigy 2200 25c
    74.Ingo ( Plextor ) Protos Kunststoff , Orginal Motor , 3x HS225Hb, 1 , S9650 , LTG2100 , SAB , 2 x 3 S 2650 Turnigy , YGE 60
    75. -Flo- , Plastik, YGE 60, Scorpion 880kV, GP780, SH-1250MG, SH-1257MG, Turnigy 6S 2650mAh 30C
    76. Matthias (foxi): Protos Kunststoff, MSH Scorpion 880 KV, 15 T, MSH YGE-60, DES676 BB, GY-401,5S 3000 Zippy
    77.Jörg(Askalon) Plastik, MSH Scorpion 880kv,14er ,yge 60, savox sh1250mg,mini-Vstabi, Savox 1290mg,Sab red Devil,futaba 6106HF,Rockamp 6S 30C 2600
    78. Jürg (Schletzer), Protos CFK, YGE-60, Scorpion 880kV, SAB Blätter, 3x Savox SH-1250MG, 1x Savox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
    79.Tilo (Pegasus) Plaste Protos,MSH Motor Scorpion 880,YGE 60 regler,SAB Latten,Paddellos mit Microbeast, 6S 2200er LiFePo, Savox-metallgetriebelchen
    80.Dominik 2 Stück CFKmit Jeti Duplex: Einer Microbeast mit Radix, Savox1350 an TS und FS555BB, YGE80 an MSH Stock, der andere mit DES676 an TS, Gy401 u 9254, Roxxy 960 an Scorpion 3026 und Spinblades demnächst im PET-Rumpf...
    81.Ludwig (Lud-wig) Protos Kunststoff, Hughes 500 D Rumpf, Scorpion 1000 KV, 15 T, Hacker X-70 Pro, SAB Blätter, 3xHitec HS 85BB, 1xRobbe FS550 Carbon Digi, GY-401, 4s SLS 4000
    82 .Uwe (ueber30) Protos Kunststoff, Scorpion 880 KV 14er Ritzel,Roxxy 960-6 ,3x Align DS 510 , GP 750 / 9254 , Turnigy 6S 2650 20C oder 7S LiFe
    83. Gernot (Outrunner) Protos CFK, Scorpion 880 KV 14er Ritzel, YGE 60, 3x Savöx 1250MG, Microbeast / Savöx 1290MG, SLS APL 5S 3300 30C+
    84. Fabian (Colonia), Protos CFK, Scorpion 880KV, Jive 80Lv, 3x Savöx 1250MG, Microbeast, Savöx 1290MG, 6S
    85. Thomas (Tom.Thelis) Protos Kunststoff, Scorpion 880KV, 14T, YGE 60, 3x Savox SH-1250MG, GY-520 mit BLS254, Turnigy 6S 2450mAh 30C, Spinblades HS
    86. Robert (R013ert) Protos CFK Stretch FBL, Scorpion 3026 12n8p 5+4d, 15T, YGE 60, Castle Creations BEC, 3x Align DS510 @ 7.0v , Mini V-Stabi Blueline mit 2 Spektrum Sats, Savox SH-1290mg @ 6.2V, SAB 470mm und KBDB Heckblätter
    87. Thomas(Tomp), Plastik, Scorpion, YGE, SAB, Savox, Team Orion, Mini Stabi Blueline Express, Turnigy 2650 20C
    88. Peter ( Pietbaer ), Protos Kunststoff, Scorpion 880 KV, Regler YGE 60A, 15er Ritzel, TS 3x Savöx 1350, Heck Savöx 1357, GY-401, Blätter SAB, SLS APL 6S 2650 mAh 30C+, DX 8
    89 Marius, Protos CFK, Scorpion 880kv, Regler YGE 60A, TS: Savöx 1350, Heck: Savöx 1290MG, Microbeast 2.0, Blätter: SAB, Turnigy 2650 20C, Sender: Graupner MX-22 mit Raast Modul Empfänger: Futaba FS617
    90. Frank (phoenix7), Protos CFK FBL, Scorpion (Stock), YGE 60A, TS: SAVÖX 1250MG, Heck: SAVÖX 1257MG, V-Stabi Mini 5.2 Pro, Blätter: Spinblades FBL, Turnigy 3000 20C, WK2801 Pro
    91.Benjamin(Ben), Plaste Protos,MSH Fbl Kopf und Microbeast V2, Scorpion 880 mit 15T Ritzel,Simprop Magic 62H,TS:Futaba 9650,Heck Savöx 1290MG, Blätter: Blattschmied Ultra FBL,Turnigy 6S 2650 Lipo[/quote]
    92.ChainMan, Protos Kunststoff, Scorpion 880KV, YGE 60, 3x Savox SH-1250MG, Savox 1257MG, MSH Fbl Kopf, Mini Stabi Blueline 5.1, SAB + Heck Original, Turnigy 6S 2450mAh 20C + Thunder Power 6S 2700er 30C.
    93. the-fallen, Protos CFK, "Castle ICE Lite 100" Regler mit Datenlogger, "Castle 10A" BEC, TS-Servo: Align510, Heck: Futaba BL251, MicroBeast, Rest ist Standard
    94. Markusgu, Protos CFK,yge80,1257 Heck, 9650 ts, nanotec 6s,gy520
    95. Frank(Crusty77), Protos Plaste,MSH Motor 880KV, YGE60, 3x DES676BB, 1357SH, MSH FBL Kopf, Microbeast V2, Blätter: Helitec + Heck Original, Life 6s 2200mAh
    96. Michl (dilg), Protos Kunststoff, Scorpion 880 KV 14er Ritzel, Yge60, 3x Robbe FS 550 CD + Hitec 6965, v-stabi, Kokam 5s 3200/Turnigy 6S 2650
    97. Sven (slevin), Prôtos Kunststoff, Scorpion 3026-880, YGE 60, 3x Savöx SH-1250MG + Futaba S9257, Align GP-780, SAB, 6S A123
    98. Alex (Alex2707) Protos CFK stretched @ 8,0V, Scorpion 3026-880, Roxxy 9100-6, 3x Hyperion DH16-SCD + Hyperion DH20X-GCD, CastleCreations BEC @ 8,0V, Microbeast 3.0.8, EDGE 473mm FBL, Radix Heckblätter, Turnigy 6S 3000mah
    99. Stefan ( ESPler ) Protos CFK Stretch @ 8,4V, CC-BEC 10A, 3026- 880, Roxxy 9100-6, 3x Hyperion DH16-SCD, Heck Hyperion DH20X-GCD, Microbeast 3.08. SAB RedDevil 465 mm Umbau 03.10.2011
    100. Stefan ( forrest ) Protos CFK Stretched , MSH 880Kv, YGE 80A, 3x Savöx SH-1250MG , 1x Savöx SH1290-MG am Heck, Microbeast V3, Turnigy 2650 6s, GensAce 2600 6s, SAB 470mm
    101. Kiba, Protos CFK, Scorpion 880KV, YGE60A, 3x Savöx 1350, 1x Savöx SH1290MG am Heck, Vstabi 5.2 Pro, SLS 2650 6s Eco, SAB - SB - Radix 430mm
    102. Ayhan ( paranoid007 ) Protos CFK, 820, Roxxy 9100-6, 3x Align DS510, Heck Savox SH1290, Microbeast, Blattschmied + Edge 473 für Stretch
    103. Frank, Protos CFK, Scorpion 880KV, Jive60, 3x Savöx 1350, 1x BLS 251 am Heck, Vstabi 5.1 Pro, Turnigy 5S, Blattschmied
    104. Jens (heli_junkie), Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Graupner DES 676 BB, 1x Savöx SH1290MG, Mini VStabi 5.2 Pro, Turnigy 6S 2650mAh 40c, SAB 430m
    105. Manuel (Manuel-P) Protos 500 Plstik, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Turnigy 6S 3000mAh, 425er SAB Latten
    106. Alex (Tatum) Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, BeastX, Turnigy 6S 2650mAh 20c, SAB 430
    107. Daniel (Daniel...) Protos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Gensace 6S 2600mAh 25C, SAB
    108. Olaf12: Protos 500 CFK FBL; Strecker Motor; 12er Ritzel, 18er Alu-Heckritzel; Kontronik Jazz 80; TS Futaba S9650; Heck BLS254; 6S 2600 SLS 35C; Blattschmied Ultra FBL 430mm; GyroBot 900; R608FS
    109. Luca (MrHeli33) Protos 500 Plastik, 15er Ritzel, Stock Motor, MSH 80A, 3mal Graupner Des 658 BB MG, Heck S9257 ( vielleicht werde ich das Kds N690 mal als Heckservo verwenden, Modellexxpert 2600mah/30C(Withe line) Torison 430mm, Align 3Gx, Graupner MX-20 Hott
    110. Basti (vierfuffzig) Plaste 500, alles Stock, 3 x KDS N580, Heck KDS N690, MiniVStabi
    111. Basti (Yaku79) Plaste 500 FBL, 3x Hyperion Atlas HP-DH16-SCD @7V, 1x Hyperion Atlas HP-DH20x-GCD @7V, 1x Scorpion HK 3026-1400 umgewickelt bei Torro auf 1030kv @ 15T, 1x CC ICE 75, 1x Mini vStabi 5.2 pro, Edge 423 FBL Latten, Turnigy 6S 2650mAh 40C/Gens Ace 6S 2600mAh 25C
    112. Micha (Schmusebaer61) Plaste 500 FBL, Scorpion 880KV, Kontronik Jazz 80, 3 x Savox SH-1350, Graupner DS 8900G am Heck, Blätter SAB / Alin 3G, BeastX 3.0, Fusuno CFK Finne, Lipoblitzer, Turnigy 6S 3000
    113. Robert (delta-hotel) Protos 500 CFK FBL, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x BLS 251, V-Stabi 5.2 Pro, Turnigy 3300 6S nano-tech
    114. Tom (tomtom77) Prôtos 500 Plaste FBL, Scorpion 880KV, YGE 60A V4, 3x Graupner DES678, 1x DES 578, 3GX, Turnigy 5s 3600er
    115. Manuel (roehrig), PlasteProtos / Beast mit nur 1xDSMX-Satellit, Motor 3026-880Kv und YGE 60A, TS-Servos: Graupner DES 676 BB, Heckservo: Graupner DS 8900 G, Funke: DX6i, Akku: 7S1-A123 2300mAh, 1750U/min = über 10Min Flugzeit = 1800 - 2000mAh. (180-200mAh/min)
    116. Onno: Plaste Streck-Prôtos, Stock Scorpion, Jive 80LV, 3x DS510, 1x SH12920MG, Beast, P-Ionen 3,2Ah, 12t am Motor, 18t am Heck, Spin Blades FBL
    117. Benjamin (Almigurt) Plastik streck- Protos, Stock Motor, Yge60, 12T Ritzel, 18T Heck, HS5245MG(TS), BLS-254 am Heck, HT Dark-Magic 465mm, P-Ion 3200, µbeast
    118. Michal (Michalp)Protos 500 Extrem(wurzer-heli Edition) 1,3 KG Fluggewicht-Scorp 3026-YGE 60 LV-15er Ritzel-Savöx sh 1250 TS-SH 1257 Heck-Radix 430 FBL-MSH Brain 2200 Roxxy ,(3-6s) Headspeed 1400(3D)- 3200(Smack)
    119. Michal (michalp)Protos 500 Carbon , mks 9670a+, savox 1290,YGE 60,Scorp 3026-880,Radix 430 FBL,Mini VStabi pro ,Völtz 2600 65C , Headspeed 2700-3200
    120. Daniel (Dan0111)Protos 500 Plastik, TS Graupner HBS 660, Heck HBS 690, YGE 90 mit V-Stabi Gov im Gebrauch, Motor Stock, SAB 430 FBL, Mini V-Stabi Pro, Turnigy Nanotech 2650 35C, Headspeed 2300 -3000
    121. Heiko (Heiko72) Protos 500 Plastik Flybar, Grauperner Servos auf TS, Apektrum am Heck, Motor Stock, Turnigy 3000 30C, Drehzahl 2500-3000
    122. Martin (asassin) Protos 500 FBL, Scorpion 880KV, YGE 60A V4, Savöx 1350, DS0606, Mini V-Stabi pro, myLipo
Grüße, Martin

Wave-Helicopter
Benutzeravatar
Goldfussel
Beiträge: 1337
Registriert: 28.10.2006 00:54:01
Wohnort: Wettenberg

#261 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von Goldfussel »

Ich bin raus.
Gruß Fussel
----------------------------------------------
Diabaolo - E700
Futaba T14 / IISI
Haetbox : -> HaDi-RC.de
Benutzeravatar
Yaku79
Beiträge: 11570
Registriert: 30.04.2009 22:12:31
Wohnort: Oyten bei Bremen
Kontaktdaten:

#262 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von Yaku79 »

Warum?!?


Tapped via iPhone/iPad
Benutzeravatar
Goldfussel
Beiträge: 1337
Registriert: 28.10.2006 00:54:01
Wohnort: Wettenberg

#263 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von Goldfussel »

Weil ich keine Protese mehr habe ;)
Gruß Fussel
----------------------------------------------
Diabaolo - E700
Futaba T14 / IISI
Haetbox : -> HaDi-RC.de
Almigurt
Beiträge: 273
Registriert: 20.06.2010 22:54:03

#264 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von Almigurt »

Schlimmer Fehler...


Ich leide auch gerade :-)
Benutzeravatar
trailblazer
Beiträge: 5134
Registriert: 23.01.2008 11:32:37
Wohnort: Hamburg - St. Pauli

#265 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von trailblazer »

Oh...da könnte ich ja auch mal updaten - aus nem Protos (der leider komplett zerstört in der Restekiste sein Dasein fristet) ist ein Mini Protos geworden 8) Er hat mich aber auch lange genug begleitet, es war der ideale "Student-mit-wenig-Geld" Heli. Nun fliege ich 600er und 700er, der Mini ist zum Spass haben zwischendurch eher zufällig dazugekommen. Aber mit Mini Vstabi, Jazz80 und MKS Servos fliegt er mehr als geil und ist sooo verdammt leise :mrgreen:
Gruss Andre

TT X50E, BeastX 12s 3300mAh
SAB Goblin 700, VStabi 5.3, Roxxy 120@VSTABI Gov
TBS DiscoveryQuad, 4s 3300maH, FPV, Multiwii 2.2, Rushduino, Fatshark Attitude
FPV Bixler 2, EZOSD
Benutzeravatar
trailblazer
Beiträge: 5134
Registriert: 23.01.2008 11:32:37
Wohnort: Hamburg - St. Pauli

#266 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von trailblazer »

1. Andre (trailblazer), Mini Protos, Mini VStabi 5.3.4 Pro, 4s 2200mAh, Jazz 80, CC BEC, MKS DS95 / DS95i, Stretchheck/Carbon, Fusuno Haube und HK 325er FBL Blätter
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, Stockmotor, Hacker X70 SB Pro, 6S, MSH-Flypbarless, V-Stabi, 9650, 9257
5. Mario (mariokober) CFK von MSH, Scorpion, MSH 80A, TS: Savox, Microbeast, BLS251
6. Flo(torro) cfk-stretch, YGE80 (BEC auf 6V), CC BEC, HK3226 12N10P 6+5x1,25YY 15er ritzel, BLS153@7,5V, BLS251@6V, miniVS 5.2pro Gov
7. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
8.1 Tim (Timmey) Prôtos 500 Plaste : mini V-Stabi 4.0, HK3026-12N14P 5+4x1,18D 6S, 16t, YGE 80, 3x MKS DS9660A+, SAB 430, BLS251, CCBEC PRO @ 6,2v, Spektrum
8.2 Tim (Timmey) Prôtos 500 CFK streched: mini V-Stabi blue 5.1 PRO, HK3026-12N14P 5+5x1,12D, 14t, YGE 60, 3x 1250MG, EDGE 473, 1290MG, Spektrum
9. Patrick (Pat1802), Plaste mit Paddel
10. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
11.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
12. Jörg (Chorge), Plastik mit FBL-Eigenumbau (Alu Blatthalter, Mikado-Mitnehmer), V-Stabi, MSH 80A-Regler und Motor (15T), 3x DS510, BLS251, 6S
13. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
14. Christian (kowi) Plaste & Paddelkopf, MSH 26-10 + YGE60 an 6S & 14T, 3x Savöx SH-1350, SH-1290MG, LTG2100
15. Stephan (Whoostar) CFK und V-Stabi 4.0, 3x Savöx SH-1350, BLS251, Scoripon KV880 @ 14t, Jive60LV, 6s 20C - Gestreched auf 470er Latten
16. Alexander (sptotal) Plastik, V-Stabi 4.0, Scorpion 880kv, YGE60, DS510, SH-1290MG, 6s => ersetzt durch Nachfolger
17. Jens (IceOne) Plastik, Paddel, Scorpion 880kv, YGE 80, DS510 TS, Spartan DS760 + DS520, 6S 2650mAh Flightmaxx 30C
18. Christian (REX ) Plastikchassis, Stockmotor, Alignregler, Savox, Rockamp Gyro, Paddel, Blattschmied Jazz,
19. David (helidave) cfk chassi stock: Motor regler sab blätter ,3*hs 225BB ,1savox, ltg2100
20. Wolfgang (dschim) CFK, ohne Paddel, YGE, Stockmotor, µBeast, SAB
21. Horst (heli123) Plastik, Paddel, MSH Motor/Regler, Gy401/9257, SAB und Jazz Blattschmied, TS 5085MG, Tgy 2650 20-30C, ZippyH 2x3s 2200
22. Christian (hitch) CFK, AC-3X, Motor/Regler Stock, TS Savöx 1250, Heck Savöx 1290
23. Wolfgang (ER Corvulus) Plaste, Paddel, CC60 + Scorpion 880 an 15T, TS HS225, 2100+ 9257, GCT Jazz, NoName 6s 2450/25c
24. Thomas (TJsat) Plaste, Paddel, YGE 80; Stock, Savox, HC, 9257
25. Götz (Gogi) Kunststoff, Microbeast Scorpion 3026 1000KV, Roxxy 960 Regler, SAB Blätter, TS:Align DS510, Heck: BLS 251 A123 6S und 5S 3300er Lipos.
26. Onno (Taumel-Mac) Plastik, Stockmot, YGE-60, Gy 401, Alu-Rotorhalter, Alu-Heck, und latürnich: Paddel!
27. Frank (BoGSer) CFK, Stockregler, -motor, TS Savöx 1250MG, Heck Savöx 1257MG, V-Stabi 4, noch 6S A123
28. Andi (andiz) CFK, YGE 80, Savox, Scorpion 880, V-Stabi 4.0, SLS 6S 2500
29. Matthias (matt44), Plastik, YGE 60, TS: HS-225, Heck: Align DS-520, Baukastenmotor, Rockamp Gyro one, SLS 6S 2200/Zippy 20C 2650
30. Ben (fuci), Plastik, Align 60A Regler, GU-210, HS 225BB, 9257, Stockmotor und Paddelfuci
31. Stefan (stefan baum) Plastik, Mini V-Stabi, Roxxy,Motor: Scorpion 880KV, TS: 3x Savöx , Heck: S9257, Akkus: 2x 6S SLS ZX 2500 / 2x 6S Zippy 2650
32. Perrin CFK, YGE 60, MSH Motor, Spartan DS760 + DS520, 3x DS510, Ar6200, Akku: Turngiy 6s 30C 2650mAh
33. Memphiz, Roxxy 960-6, MSH Motor, LTG2100 + 9257, 3x DS510, Ar6200, Akku: Turnigy 6s 20C 3000mAh
34. Thomas (ToyoTom) Plastik, Paddel, Scorpion880, YGE80, DS760+Savox1357, TS Savox1350, 6S- 2650-20C
35. Andi (AndiYen) CFK, mini-VStabi, Jive 60, Scorpion 3026-880 14t, Savox 1350, S9254, 6S-2200-30C
36. Frank (Killroy-Tattoo) Plasik, Kontronik Motor, CFK Mikado Blätter, Yellow Tuning, Jazz 80, 225 BB Servos, 2,4 Ghz, Akkus: 3900 4S3P Konion
37. Ralf (ralfiboy) Plastik + orig.Fbl-Kopf mit µbeast, Stock-Motor, JetiSpin66, 3*DS510+SH1290MG, Jeti R6 mit MUI75A und 7s A123 SB-halbsym
38. Marcus (Schroedi) Plastik, Paddel, Scorpion HK-3026 1210kv, 15Z, YGE80, TS: HS-82MG, Savox 1357 + GY401, 4s3p Konion 3900 & 3300, Schulze alpha 8.35 35Mhz
39. Christian (Choplifter), CFK, MSH Motor, MSH Regler, Savox SH-1250MG, Spartan DS760 + 9254, Zippy 5s 3300mAh
40. Guillaume(gigi92), CFK, Scorpion 3026-880, Roxxy 960-6, Align DS 510, 3Digi+S9254, 6S Turnigy 2200mah 30C
41. Roland (Helifan.de), Plastik, Werksmotor und -Regler
42. Jörg (Pirol116), CFK Flybarless mit LOGO 400 Haube, befeuert von 6S 2600mAh, HK-3026-880kv, YGE80, 3x SAVÖX 1350, 1x SAVÖX 1257MG, Microbeast, FF7
43. Stefan (buz), Infinity CFK - Paddellos; 7s A123; CC Ice 100; Strecker 330.30; Savox; Jeti Duplex; MicroBeast
44. Daniel (Daniel Gonzalez) Plaste, VS 4.0, Savox 1350 und BLS 251, 880 Scorpion, Jive, 6S Turnigy 20C 2650er
45. Andi (Tieftaucher) CFK, Scorpion 880KV mit 14T, Savox1350, AC-3X mit 9254, Jazz80, SAB Red Devil, Logo 400 Haube
46. Dirk (Silverwing) Kunststoffchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, Mini V-Stabi 4.0, Rockamp Haube T-Rex 500 in Signalfarbe
47. Jan-Malte (Sundog) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-20C
48. Matthias (Matoz) CFK, MSH-Motor, YGE 60, Savox 1250, Mini V-Stabi mit 1290, Turnigy 6S-2650-30C
49. André (michael.myers) CFK, MSH-Motor, MSH-Regler, Align DS510, KDS-800 mit Savox SH-1290MG, Turnigy 2x3S 2650 30C
50. Jörg (Josche) CFK, MSH-Motor 13T, YGE 60, AC-3X, 3x Savox 1250, 1x BLS 251, ZIPPY 6s1p 3000mAh 20C, FF7, Unilog
51. Arnd (yacco), CFK, Scorpion HK-3026 1000 15T, Xetronic 70A, 3x FS-550 BB MG, 1x MKS DS8910, µBeast, 5S 3000/3300 mAh, MX16 mit Assan 2G4
52. Mike (justhelicopters), Kunststoffchassis, Scorpion 880, Jazz 80-6-18, Futaba S9650 u. S9657, Mini VStabi, SLS ZX 2500 30C
53. Holger (Idefix), Kunststoffchassis, Roxxy960-6, Scorpion 3026 5+5x1,12D 750KV + 17R. ,Blattschmied GCT-Ultra-Acro, DES 658 BB/MG, Futaba S9254, Mini V-Stabi, CC Bec 6V, 6S 2200mah 30-40C, MX22 mit Spekrtum DM9
54. Armin (pelzebub) Plastik, Scorpion 880, CC ICE 75, 3x Align DS510, Spartan Quark+JR8900G, FF7, Akku wahrscheinlich 6s LiFe
55. Steven (b3nJi) Protos CFK, 3xSavöx SH-1350, 1xAlign ds620, MICROBEAST, YGE120, HK3026-12N14P 5+4x1,18D 840kV 17Z, 6S 2650 30C und en Mini Protos :-]
56. Jürgen (Kupfer) Protos CFK SE, Scorpion HK3026 12N14P 5+4x1.18D, MSH 80A +CC BEC, Microbeast, SAB 470, 3x Hyperion DH16-SCD, 1x Hyperion DH16-GCD, Turnigy nano-tech 6S 2,65Ah
57. Chris (pepto) Protos CFK, MSH Regler und Motor @15T, SAB/KBDD Blades, 3x Align DS510, Savox SH1290MG, AC-3X/3Digi, Turnigy 2650mAh 20/30C
58. Timo (PeterLustich) Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, Spartan DS760, 2xTurnigy 2650 mAh 30C
59. TOM (tombof3a), Protos Plastik, Paddel, Stock Motor, Hacker SB70 Regler, SAB, 3xHS225BB, 1x Futaba 9257, Rockampgyro, 2x 3S SLS EP 2650 mAh 30C
60. Klaus (worldofmaya), Protos Kunststoff , Rigid, Stock Motor, YGE 80LV, Maniac, 3x Futaba 9650, 1x Futaba BLS251, VStabi v4, 5s Turnigy 3600 30C, 6s Turnigy 3000 30C
61. Daniel (don-omar) ->>>STRECH+ Logo 400Canopy, 3x MKS DS 9660 A+, Roxxy 9-100, Scorpion 880, microBeast, S9254, 2200er Rockamps
62. Thilo (kilothilo) Protos CFK, Jazz 80, TS S9650, Heck BLS254, Gy-520, Stock Motor, SAB Blätter (noch mit Ruderkopf )
63. Sebastian (zamb0) - Protos CFK, Jazz 80, HS-5245MG, Spartan, BLS 251, Blattschmied/SAB, 2x A123 7s1p und Krückstock
64. Mike (Raptor-Spy) Protos CFK, Stock Antrieb, Align 510 TS Servos, heckservo Futaba S9256, Stock SAB Blätter, Stabi System MicroBeast wenn es mal da ist, 6S 2650 Turnigys
65. Alexander(ali.k.) Protos CFK, MSH-Regler, MSH-Motor (14T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1290MG, Rockamp Gyro One, 6S Rhino 2250 25C
66. Markus (electron6), Protos CFK, MSH-Regler, MSH-Motor, SAB Blätter, 3xSavox SH-1250MG, 1xSavox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
67. Jonas (Provotroll) : Plaste-Stretch-Prôtos, Torro-Croco, Mini V-Stabi, YGE 60, 3 x Savöx SH-1350, Futaba S9257, Futaba R617FS, 470mm SABs, 3Ks, Microhelis Seitenleitwerk
68. Mike (taucherle): Protos CFK, MSH-Regler, MSH-Motor (15T), SAB Blätter, 3xSavox SH-1350, 1xSavox SH-1357, paddellos System MicroBeast, 6S 2650 Turnigys
69. Adrian (wildcat): Protos normal, Jive 80LV, Scorpion 880, SAB-Blätter mit Protos-Holo, FBL - Microbeast, 6S 2650 Turnigy's
70. Micha (mozart1982): Protos Carbon, YGE 60, Scorpion 880, Vstabi 5.0, Savox, 14T, Rockamp Lipos
71. Frank (Fränky): Protos CFK, MSH Scorpion 880 KV, 15 T, MSH YGE-60, 4x DES676 BB, MicroBeast, MSH SAB Blätter, 6S 2200 P- LiFe
72. Chris (Chris_D): Protos Carbon mit MSH FBL Umbau, YGE60, Scorpion 880, SAB, Savox 1350, Align DS650, Microbeast, R617FS, 6S Turnigy 2200 30/40C
73. Hardy (Winnihardy): Protos Carbon; FBL Umbau MSH; Scorpion 880; YGE- 60, SAB; Savox 1350; Savox 1290; Microbeast; 6s Turnigy 2200 25c
74.Ingo ( Plextor ) Protos Kunststoff , Orginal Motor , 3x HS225Hb, 1 , S9650 , LTG2100 , SAB , 2 x 3 S 2650 Turnigy , YGE 60
75. -Flo- , Plastik, YGE 60, Scorpion 880kV, GP780, SH-1250MG, SH-1257MG, Turnigy 6S 2650mAh 30C
76. Matthias (foxi): Protos Kunststoff, MSH Scorpion 880 KV, 15 T, MSH YGE-60, DES676 BB, GY-401,5S 3000 Zippy
77.Jörg(Askalon) Plastik, MSH Scorpion 880kv,14er ,yge 60, savox sh1250mg,mini-Vstabi, Savox 1290mg,Sab red Devil,futaba 6106HF,Rockamp 6S 30C 2600
78. Jürg (Schletzer), Protos CFK, YGE-60, Scorpion 880kV, SAB Blätter, 3x Savox SH-1250MG, 1x Savox SH-1290MG, paddellos System MicroBeast, 6S 2650 Turnigys
79.Tilo (Pegasus) Plaste Protos,MSH Motor Scorpion 880,YGE 60 regler,SAB Latten,Paddellos mit Microbeast, 6S 2200er LiFePo, Savox-metallgetriebelchen
80.Dominik 2 Stück CFKmit Jeti Duplex: Einer Microbeast mit Radix, Savox1350 an TS und FS555BB, YGE80 an MSH Stock, der andere mit DES676 an TS, Gy401 u 9254, Roxxy 960 an Scorpion 3026 und Spinblades demnächst im PET-Rumpf...
81.Ludwig (Lud-wig) Protos Kunststoff, Hughes 500 D Rumpf, Scorpion 1000 KV, 15 T, Hacker X-70 Pro, SAB Blätter, 3xHitec HS 85BB, 1xRobbe FS550 Carbon Digi, GY-401, 4s SLS 4000
82 .Uwe (ueber30) Protos Kunststoff, Scorpion 880 KV 14er Ritzel,Roxxy 960-6 ,3x Align DS 510 , GP 750 / 9254 , Turnigy 6S 2650 20C oder 7S LiFe
83. Gernot (Outrunner) Protos CFK, Scorpion 880 KV 14er Ritzel, YGE 60, 3x Savöx 1250MG, Microbeast / Savöx 1290MG, SLS APL 5S 3300 30C+
84. Fabian (Colonia), Protos CFK, Scorpion 880KV, Jive 80Lv, 3x Savöx 1250MG, Microbeast, Savöx 1290MG, 6S
85. Thomas (Tom.Thelis) Protos Kunststoff, Scorpion 880KV, 14T, YGE 60, 3x Savox SH-1250MG, GY-520 mit BLS254, Turnigy 6S 2450mAh 30C, Spinblades HS
86. Robert (R013ert) Protos CFK Stretch FBL, Scorpion 3026 12n8p 5+4d, 15T, YGE 60, Castle Creations BEC, 3x Align DS510 @ 7.0v , Mini V-Stabi Blueline mit 2 Spektrum Sats, Savox SH-1290mg @ 6.2V, SAB 470mm und KBDB Heckblätter
87. Thomas(Tomp), Plastik, Scorpion, YGE, SAB, Savox, Team Orion, Mini Stabi Blueline Express, Turnigy 2650 20C
88. Peter ( Pietbaer ), Protos Kunststoff, Scorpion 880 KV, Regler YGE 60A, 15er Ritzel, TS 3x Savöx 1350, Heck Savöx 1357, GY-401, Blätter SAB, SLS APL 6S 2650 mAh 30C+, DX 8
89 Marius, Protos CFK, Scorpion 880kv, Regler YGE 60A, TS: Savöx 1350, Heck: Savöx 1290MG, Microbeast 2.0, Blätter: SAB, Turnigy 2650 20C, Sender: Graupner MX-22 mit Raast Modul Empfänger: Futaba FS617
90. Frank (phoenix7), Protos CFK FBL, Scorpion (Stock), YGE 60A, TS: SAVÖX 1250MG, Heck: SAVÖX 1257MG, V-Stabi Mini 5.2 Pro, Blätter: Spinblades FBL, Turnigy 3000 20C, WK2801 Pro
91.Benjamin(Ben), Plaste Protos,MSH Fbl Kopf und Microbeast V2, Scorpion 880 mit 15T Ritzel,Simprop Magic 62H,TS:Futaba 9650,Heck Savöx 1290MG, Blätter: Blattschmied Ultra FBL,Turnigy 6S 2650 Lipo[/quote]
92.ChainMan, Protos Kunststoff, Scorpion 880KV, YGE 60, 3x Savox SH-1250MG, Savox 1257MG, MSH Fbl Kopf, Mini Stabi Blueline 5.1, SAB + Heck Original, Turnigy 6S 2450mAh 20C + Thunder Power 6S 2700er 30C.
93. the-fallen, Protos CFK, "Castle ICE Lite 100" Regler mit Datenlogger, "Castle 10A" BEC, TS-Servo: Align510, Heck: Futaba BL251, MicroBeast, Rest ist Standard
94. Markusgu, Protos CFK,yge80,1257 Heck, 9650 ts, nanotec 6s,gy520
95. Frank(Crusty77), Protos Plaste,MSH Motor 880KV, YGE60, 3x DES676BB, 1357SH, MSH FBL Kopf, Microbeast V2, Blätter: Helitec + Heck Original, Life 6s 2200mAh
96. Michl (dilg), Protos Kunststoff, Scorpion 880 KV 14er Ritzel, Yge60, 3x Robbe FS 550 CD + Hitec 6965, v-stabi, Kokam 5s 3200/Turnigy 6S 2650
97. Sven (slevin), Prôtos Kunststoff, Scorpion 3026-880, YGE 60, 3x Savöx SH-1250MG + Futaba S9257, Align GP-780, SAB, 6S A123
98. Alex (Alex2707) Protos CFK stretched @ 8,0V, Scorpion 3026-880, Roxxy 9100-6, 3x Hyperion DH16-SCD + Hyperion DH20X-GCD, CastleCreations BEC @ 8,0V, Microbeast 3.0.8, EDGE 473mm FBL, Radix Heckblätter, Turnigy 6S 3000mah
99. Stefan ( ESPler ) Protos CFK Stretch @ 8,4V, CC-BEC 10A, 3026- 880, Roxxy 9100-6, 3x Hyperion DH16-SCD, Heck Hyperion DH20X-GCD, Microbeast 3.08. SAB RedDevil 465 mm Umbau 03.10.2011
100. Stefan ( forrest ) Protos CFK Stretched , MSH 880Kv, YGE 80A, 3x Savöx SH-1250MG , 1x Savöx SH1290-MG am Heck, Microbeast V3, Turnigy 2650 6s, GensAce 2600 6s, SAB 470mm
101. Kiba, Protos CFK, Scorpion 880KV, YGE60A, 3x Savöx 1350, 1x Savöx SH1290MG am Heck, Vstabi 5.2 Pro, SLS 2650 6s Eco, SAB - SB - Radix 430mm
102. Ayhan ( paranoid007 ) Protos CFK, 820, Roxxy 9100-6, 3x Align DS510, Heck Savox SH1290, Microbeast, Blattschmied + Edge 473 für Stretch
103. Frank, Protos CFK, Scorpion 880KV, Jive60, 3x Savöx 1350, 1x BLS 251 am Heck, Vstabi 5.1 Pro, Turnigy 5S, Blattschmied
104. Jens (heli_junkie), Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Graupner DES 676 BB, 1x Savöx SH1290MG, Mini VStabi 5.2 Pro, Turnigy 6S 2650mAh 40c, SAB 430m
105. Manuel (Manuel-P) Protos 500 Plstik, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Turnigy 6S 3000mAh, 425er SAB Latten
106. Alex (Tatum) Prôtos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, BeastX, Turnigy 6S 2650mAh 20c, SAB 430
107. Daniel (Daniel...) Protos 500 CFK, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x Savöx 1290MG, Mini V-Stabi Pro, Gensace 6S 2600mAh 25C, SAB
108. Olaf12: Protos 500 CFK FBL; Strecker Motor; 12er Ritzel, 18er Alu-Heckritzel; Kontronik Jazz 80; TS Futaba S9650; Heck BLS254; 6S 2600 SLS 35C; Blattschmied Ultra FBL 430mm; GyroBot 900; R608FS
109. Luca (MrHeli33) Protos 500 Plastik, 15er Ritzel, Stock Motor, MSH 80A, 3mal Graupner Des 658 BB MG, Heck S9257 ( vielleicht werde ich das Kds N690 mal als Heckservo verwenden, Modellexxpert 2600mah/30C(Withe line) Torison 430mm, Align 3Gx, Graupner MX-20 Hott
110. Basti (vierfuffzig) Plaste 500, alles Stock, 3 x KDS N580, Heck KDS N690, MiniVStabi
111. Basti (Yaku79) Plaste 500 FBL, 3x Hyperion Atlas HP-DH16-SCD @7V, 1x Hyperion Atlas HP-DH20x-GCD @7V, 1x Scorpion HK 3026-1400 umgewickelt bei Torro auf 1030kv @ 15T, 1x CC ICE 75, 1x Mini vStabi 5.2 pro, Edge 423 FBL Latten, Turnigy 6S 2650mAh 40C/Gens Ace 6S 2600mAh 25C
112. Micha (Schmusebaer61) Plaste 500 FBL, Scorpion 880KV, Kontronik Jazz 80, 3 x Savox SH-1350, Graupner DS 8900G am Heck, Blätter SAB / Alin 3G, BeastX 3.0, Fusuno CFK Finne, Lipoblitzer, Turnigy 6S 3000
113. Robert (delta-hotel) Protos 500 CFK FBL, Scorpion 880KV, YGE 60A V4, 3x Savöx 1250MG, 1x BLS 251, V-Stabi 5.2 Pro, Turnigy 3300 6S nano-tech
114. Tom (tomtom77) Prôtos 500 Plaste FBL, Scorpion 880KV, YGE 60A V4, 3x Graupner DES678, 1x DES 578, 3GX, Turnigy 5s 3600er
115. Manuel (roehrig), PlasteProtos / Beast mit nur 1xDSMX-Satellit, Motor 3026-880Kv und YGE 60A, TS-Servos: Graupner DES 676 BB, Heckservo: Graupner DS 8900 G, Funke: DX6i, Akku: 7S1-A123 2300mAh, 1750U/min = über 10Min Flugzeit = 1800 - 2000mAh. (180-200mAh/min)
116. Onno: Plaste Streck-Prôtos, Stock Scorpion, Jive 80LV, 3x DS510, 1x SH12920MG, Beast, P-Ionen 3,2Ah, 12t am Motor, 18t am Heck, Spin Blades FBL
117. Benjamin (Almigurt) Plastik streck- Protos, Stock Motor, Yge60, 12T Ritzel, 18T Heck, HS5245MG(TS), BLS-254 am Heck, HT Dark-Magic 465mm, P-Ion 3200, µbeast
118. Michal (Michalp)Protos 500 Extrem(wurzer-heli Edition) 1,3 KG Fluggewicht-Scorp 3026-YGE 60 LV-15er Ritzel-Savöx sh 1250 TS-SH 1257 Heck-Radix 430 FBL-MSH Brain 2200 Roxxy ,(3-6s) Headspeed 1400(3D)- 3200(Smack)
119. Michal (michalp)Protos 500 Carbon , mks 9670a+, savox 1290,YGE 60,Scorp 3026-880,Radix 430 FBL,Mini VStabi pro ,Völtz 2600 65C , Headspeed 2700-3200
120. Daniel (Dan0111)Protos 500 Plastik, TS Graupner HBS 660, Heck HBS 690, YGE 90 mit V-Stabi Gov im Gebrauch, Motor Stock, SAB 430 FBL, Mini V-Stabi Pro, Turnigy Nanotech 2650 35C, Headspeed 2300 -3000
121. Heiko (Heiko72) Protos 500 Plastik Flybar, Grauperner Servos auf TS, Apektrum am Heck, Motor Stock, Turnigy 3000 30C, Drehzahl 2500-3000
122. Martin (asassin) Protos 500 FBL, Scorpion 880KV, YGE 60A V4, Savöx 1350, DS0606, Mini V-Stabi pro, myLipo
Gruss Andre

TT X50E, BeastX 12s 3300mAh
SAB Goblin 700, VStabi 5.3, Roxxy 120@VSTABI Gov
TBS DiscoveryQuad, 4s 3300maH, FPV, Multiwii 2.2, Rushduino, Fatshark Attitude
FPV Bixler 2, EZOSD
FSK4ever
Beiträge: 395
Registriert: 25.05.2012 11:26:19
Wohnort: Herzogenaurach

#267 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?

Beitrag von FSK4ever »

+1
CFK-Version / Strech / Savox auf der Ts / BLS auf dem Heck / Edge 473 FBL / vStabi Blueline Pro mit Gov. / MSH 880er mit 13er Ritzel / 18er Heck / YGE 60 / 6S 3000 mAh / 1850 rpm und knapp 11 Minuten Flugzeit mit rund 30% Rest im Akku
Antworten

Zurück zu „Protos 500“