Hy, wollte jetz letzte woche meinen umgebauten v-stabi Logo 400 einfliegen und musste feststellen das er bei pitchstößen den moter abregelt/ausschaltet. jetz wollt ich mal fragen ob jemand das problem kennt. ich fliege das hacker antriebsset, 18 ritzel, 70% regleröffnung und 2450 rpm. der moter und regler waren nach dem kurzen flug doch schon ziemlich warm.
vielleicht kann mir ja jemand helfen
Logo 400 Problem
#1 Logo 400 Problem
Compass Atom 7HV = V-Stabi 5.2, EDGE 713mm, YGE 160 HV *mit Drehzahlausgang*, Hercules Super BEC *8,4V*, Scorpion HK-4525-520kV Ultimate *13er Ritzel*, Savox SB-2271SG HV, Savox SB-2272MG HV, 12S 5000mAh, 13Crad Pitch, 2200rpm
Last Down XXL
Prodigy 3D
Last Down XXL
Prodigy 3D
#2 Re: Logo 400 Problem
Vor dem Umbau auf V-Stabi hat alles funktioniert?
Mikado Logo 600SE TS BLS451, Futaba BLS251, Pyro 700-45 Black Edition, JIVE 80+HV, 693 EDGE
Mikado Logo 500SE 12S: TS BLS451, Heck BLS251, Orbit 30-14, JIVE 80+HV, 603 EDGE
Powered by: Gens ACE | Controlled by: FUTABA T8 + IISI | Crash count: 2009/3 - 2010/1 - 2011/3 - 2012/0
Mikado Logo 500SE 12S: TS BLS451, Heck BLS251, Orbit 30-14, JIVE 80+HV, 603 EDGE
Powered by: Gens ACE | Controlled by: FUTABA T8 + IISI | Crash count: 2009/3 - 2010/1 - 2011/3 - 2012/0
#3 Re: Logo 400 Problem
gleiches setup
Compass Atom 7HV = V-Stabi 5.2, EDGE 713mm, YGE 160 HV *mit Drehzahlausgang*, Hercules Super BEC *8,4V*, Scorpion HK-4525-520kV Ultimate *13er Ritzel*, Savox SB-2271SG HV, Savox SB-2272MG HV, 12S 5000mAh, 13Crad Pitch, 2200rpm
Last Down XXL
Prodigy 3D
Last Down XXL
Prodigy 3D
#4 Re: Logo 400 Problem
...und vor dem Umbau hattest du keine abregelt/ausschaltet?
Wenn du den Motor vom HZR entfernst, dreht dann alles leicht?
Wenn du den Motor vom HZR entfernst, dreht dann alles leicht?
Mikado Logo 600SE TS BLS451, Futaba BLS251, Pyro 700-45 Black Edition, JIVE 80+HV, 693 EDGE
Mikado Logo 500SE 12S: TS BLS451, Heck BLS251, Orbit 30-14, JIVE 80+HV, 603 EDGE
Powered by: Gens ACE | Controlled by: FUTABA T8 + IISI | Crash count: 2009/3 - 2010/1 - 2011/3 - 2012/0
Mikado Logo 500SE 12S: TS BLS451, Heck BLS251, Orbit 30-14, JIVE 80+HV, 603 EDGE
Powered by: Gens ACE | Controlled by: FUTABA T8 + IISI | Crash count: 2009/3 - 2010/1 - 2011/3 - 2012/0
#5 Re: Logo 400 Problem
läuft alles leicht und letztes jahr war auch alles ok
Compass Atom 7HV = V-Stabi 5.2, EDGE 713mm, YGE 160 HV *mit Drehzahlausgang*, Hercules Super BEC *8,4V*, Scorpion HK-4525-520kV Ultimate *13er Ritzel*, Savox SB-2271SG HV, Savox SB-2272MG HV, 12S 5000mAh, 13Crad Pitch, 2200rpm
Last Down XXL
Prodigy 3D
Last Down XXL
Prodigy 3D
#6 Re: Logo 400 Problem
noch keiner gehabt
Compass Atom 7HV = V-Stabi 5.2, EDGE 713mm, YGE 160 HV *mit Drehzahlausgang*, Hercules Super BEC *8,4V*, Scorpion HK-4525-520kV Ultimate *13er Ritzel*, Savox SB-2271SG HV, Savox SB-2272MG HV, 12S 5000mAh, 13Crad Pitch, 2200rpm
Last Down XXL
Prodigy 3D
Last Down XXL
Prodigy 3D