DX7 Spannungsregler und LiPo Mod

Benutzeravatar
catdog
Beiträge: 196
Registriert: 07.11.2006 22:22:14

#16 Re: DX7 Spannungsregler und LiPo Mod

Beitrag von catdog »

Muss ein Spannungsregler auch fuer diese LiPo's sein :?:
Die werden doch gesondert von den anderen Lipos als Senderakku verkauft bzw. angeboten.
Siehst Du :
http://www.hobbycity.com/hobbycity/stor ... rentCat=85
Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!

The Zippy Flightmax 2500mAh Transmitter pack fits snuggly into any Futaba or Jr radio which takes a 4x4 AA cell battery configuration (see image).
With a capacity of 2500mAh this lipoly replacement for your old NiCD or NiMH will last four to five times longer. Probably the best advantage with a lipoly transmitter battery is that it will give a true voltage reading from start to finish which means you can say goodbye to the days where you thought your Transmitter was fully charged at home, only to find the voltage drop off rapidly when at the field.

Spec.
Capacity: 2500mAh
Voltage: 11.1v
Constant discharge: 3-5C
Burst discharge: N/A
Weight: 142g
Size: 100x28x23mm
Plugs: Futaba, JST-XH, JR/Spe

oder dieser:
Rhino 2620mAh 3S 11.1v Transmitter Lipoly Pack

Now you dont need to recharge your transmitter battery for months.
Bring the world of Lipo technology to your transmitter today!
Lithium polymer batteries last much longer than NiMH as they have a far better energy density.This means you can now have the power of Lipo with NiMH peace of mind.

The pack includes a JST-XH charge port plug, and a Futaba plus a JR style discharge plug!

Capacity: 2620mAh
Voltage: 11.1v (3S1P)
Size: 97x30x25mm (size includes 1.5mm for clearance on all measurements)
Charge Plug: JST-XH
Discharge: Futaba & JR

Gruss, catdog
Blade CP PRO
Lama2 von Jamara
Benutzeravatar
frankyfly
Beiträge: 12239
Registriert: 09.07.2006 20:47:03

#17 Re: DX7 Spannungsregler und LiPo Mod

Beitrag von frankyfly »

catdog hat geschrieben:Muss ein Spannungsregler auch fuer diese LiPo's sein :?:
Nein, dem Spannugsregler ist es egal woher die Spannugnkommt, dem kannst du auch einen PB-Akkun dranhängen.
Es ist nur wichtig das er den erforderlichen Strom "kann" und das er mit der höheren Eingangsspannug des Lipos im vergleich zu 8NiXx zurecht kommt.

Das du dir den Lipo nicht tiefenentlädst, darauf musst du selber achten, bzw, ich meine da was von einem Hidden-Menue gelesen zu haben, wo man die Unterspannugswarnung anpassen kann.
catdog hat geschrieben:Die werden doch gesondert von den anderen Lipos als Senderakku verkauft bzw. angeboten.
Das liegt daran das sie sich, aufgund ihrer geringen Strombelastbarkeit nicht als Antriebsakku eignen und nicht ganz zufällig genau in den Akkusschacht passen.
Benutzeravatar
catdog
Beiträge: 196
Registriert: 07.11.2006 22:22:14

#18 Re: DX7 Spannungsregler und LiPo Mod

Beitrag von catdog »

Danke fuer Deine schnelle Hilfe.
Gruesse , catdog :D
Blade CP PRO
Lama2 von Jamara
Antworten

Zurück zu „Sender“