Bericht Akku 3600 14 Zellen
- piccolomomo
- Beiträge: 3262
- Registriert: 09.10.2004 18:43:31
- Wohnort: Weil der Stadt
- Kontaktdaten:
#31
Die werde ich mir für den Logo auch noch zu legen!! Ich denke erst mal nicht an Lipos:
1. Zu teuer
2. Aufwand Ladetechnik
3....
Für NIMH:
1. billig
2. wenn 2 Stangen vorhanden fliege ich auch so lang wie mit einem Lipo
3. "easy" zu händeln
4.....
Moritz
1. Zu teuer
2. Aufwand Ladetechnik
3....
Für NIMH:
1. billig
2. wenn 2 Stangen vorhanden fliege ich auch so lang wie mit einem Lipo
3. "easy" zu händeln
4.....
Moritz
Alle Schreibfehler sind zu 100% beabsichtigt und werden gezielt als Stilmittel und zur Belustigung aller eingesetzt
Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu

Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu
- Yes Yes Zani
- Beiträge: 1245
- Registriert: 01.01.2005 18:39:36
- Wohnort: Obersteiermark
#32
Wie schon gesagt mit meinen 3600 16 MinutenNIMH:
Die Kosten nur 80 Euro

MFG Martin
Helis:
Raptor 620SE
Helis:
Raptor 620SE
- piccolomomo
- Beiträge: 3262
- Registriert: 09.10.2004 18:43:31
- Wohnort: Weil der Stadt
- Kontaktdaten:
#33
Wie, 14 Zellen 3600 NIMH, so billig? wo haste gekauft?Die Kosten nur 80 Euro
Moritz
Zuletzt geändert von piccolomomo am 29.01.2005 18:21:02, insgesamt 1-mal geändert.
Alle Schreibfehler sind zu 100% beabsichtigt und werden gezielt als Stilmittel und zur Belustigung aller eingesetzt
Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu

Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu
#34
Also... Ich hab' mir jetzt ne "Hammer"-Lötspitze für meinen Uralt 100 Watt Weller-Lötkolben besorgt und 16 Zellen hier rumfliegen... Das andere Gedöns (Endkappen, Schrumpfschlauch usw.) auch. Ne Winkel-Schiene um die Akkus schön in Reihe zu legen hab' ich mir auch gebaut - ich leg' jetzt los... Einigen wir uns auf 10 Zellen!?
Ich wills jedenfalls mal AUBOWIEREN
- was mach ich dann mit den übrigen 6 Zellen hm....


Gruß Jens
* deft's setup * deft's page * liquid time *
Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds

Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds
- piccolomomo
- Beiträge: 3262
- Registriert: 09.10.2004 18:43:31
- Wohnort: Weil der Stadt
- Kontaktdaten:
#35
Also BOWIEREN geht über studieren, aber 10 Zellen sind schon in Ordnung.
Moritz
Moritz
Alle Schreibfehler sind zu 100% beabsichtigt und werden gezielt als Stilmittel und zur Belustigung aller eingesetzt
Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu

Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu
#36
Hallo Jens!
Die übrigen 6 kannst du zu einem akku für deinen Porsche löten!
Denn Autos fahren meistens mit 6 Zellen!
Die übrigen 6 kannst du zu einem akku für deinen Porsche löten!
Denn Autos fahren meistens mit 6 Zellen!
Verkaufe: Robbe RS232-Box - Interfacekabel
In a perfect world Spammers would get caught, go to jail, and share a cell with many men who have enlarged their penisses, taken Viagra and are looking for a new relationship.
In a perfect world Spammers would get caught, go to jail, and share a cell with many men who have enlarged their penisses, taken Viagra and are looking for a new relationship.
- Yes Yes Zani
- Beiträge: 1245
- Registriert: 01.01.2005 18:39:36
- Wohnort: Obersteiermark
#37
4 dazu kaufen dan hast auch 10 Zellenwas mach ich dann mit den übrigen 6 Zellen hm....

MFG Martin
Helis:
Raptor 620SE
Helis:
Raptor 620SE
#38
Ich hab übrigens die zellen:
http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... eName=WDVW
Preis ist doch ok!?
http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... eName=WDVW
Preis ist doch ok!?
Gruß Jens
* deft's setup * deft's page * liquid time *
Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds

Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds
- Yes Yes Zani
- Beiträge: 1245
- Registriert: 01.01.2005 18:39:36
- Wohnort: Obersteiermark
#39
Mach dan ein Bild wenn der Akku fertig ist.
Machst den Akku noch heute.
Machst den Akku noch heute.
MFG Martin
Helis:
Raptor 620SE
Helis:
Raptor 620SE
#40
Hi Jonas!
Das mit dem Pörsch is ne gute Idee
Hab' übrigens die Konstantstrom-Schaltung für LED's (2,45€) gekauft, nur 0,7 cm² groß und 0,2 Gramm schwer und versorgt jetzt 2 Blink LED's am Airwolf (onflight) egal wie die Akkuladung ist (von theretisch 3-30V)
- mit nem Microschalter (1,1 g) am Fahrwerk - Fahrwerk rein - LED blinkt 
Ich glaub' ich kauf noch 4 Zellen nach - Modellbau ist irgendwie nen gefräsiges Sparschwein was nix mehr rausrückt...
Das mit dem Pörsch is ne gute Idee

Hab' übrigens die Konstantstrom-Schaltung für LED's (2,45€) gekauft, nur 0,7 cm² groß und 0,2 Gramm schwer und versorgt jetzt 2 Blink LED's am Airwolf (onflight) egal wie die Akkuladung ist (von theretisch 3-30V)


Ich glaub' ich kauf noch 4 Zellen nach - Modellbau ist irgendwie nen gefräsiges Sparschwein was nix mehr rausrückt...
Zuletzt geändert von deft am 30.01.2005 00:03:03, insgesamt 1-mal geändert.
Gruß Jens
* deft's setup * deft's page * liquid time *
Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds

Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds
#41
@ Logo: Mal schaun - vielleicht noch heut' oder morgen - würde bei 10 Zellen gerne den Akku gegen Knicken stabilisieren - hab aber kein CFK-Rohr mehr da - oder ich kleb auch - mal sehen - Bild kommt auf jeden Fall!
Gruß Jens
* deft's setup * deft's page * liquid time *
Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds

Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds
#42
@ piccolomomo: genau aus diesen Gründen hab' ich den Lipo nur im PicPro - da macht das Gewicht schon mehr aus - und mit 3 Akkusätzen fürn Spirit kann man schon lange genug rumfliegen - oder!?
Gruß Jens
* deft's setup * deft's page * liquid time *
Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds

Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds
- piccolomomo
- Beiträge: 3262
- Registriert: 09.10.2004 18:43:31
- Wohnort: Weil der Stadt
- Kontaktdaten:
#43
@ piccolomomo: genau aus diesen Gründen hab' ich den Lipo nur im PicPro
ich habe auch nen Lipo im Piccolo, da sehe ich noch Sinn dahinter kostet nicht so viel und ist auch gut, aber bei größeren geht das schon ins Geld.
da kauf ich mir 2 Nimh Akkustangen mehr und wechsle den Akku ein paar mal und gut ist, diese Variante ist auch deutlich billiger.
Ja da haste schon was an Flugzeit, ich komme mit meinen 3300 Nimh im Spirit auf ca.11 min. mit 3 Packs ca 33min. das reicht...und mit 3 Akkusätzen fürn Spirit kann man schon lange genug rumfliegen - oder!?
Aber wer das Geld hat, für den lohnt sich ein Lipo.
Moritz
Alle Schreibfehler sind zu 100% beabsichtigt und werden gezielt als Stilmittel und zur Belustigung aller eingesetzt
Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu

Meine Modelle:
-Logo 10 [Kontronik Fun 600-18+Jazz 55-6-18] [GY401+9253]
-Spirit Pro [Kontronik Twist 33+Jazz 40-6-18] [GY240+MPX TinyS]
-T-Rex [450TH+Jazz 40-6-18] [GY401+HS50]
Funke:
-FF9 + Multiplex Profi 3010
http://www.rc-flug.de.vu
#44
So.
Ihr seid schuld - hab' jetzt im eBay noch 4 Zellen des gleichen Typs gekauft und werde, wenn die da sind, 2 10er Accus löten. Hoffentlich besucht der Heli dann nicht Piggy im Weltall
Falls Interesse besteht, mach' ich 'ne FotoDoku (vom Löten, nicht vom Weltall) - wenn nicht, dann spar ich mir das!?
Ihr seid schuld - hab' jetzt im eBay noch 4 Zellen des gleichen Typs gekauft und werde, wenn die da sind, 2 10er Accus löten. Hoffentlich besucht der Heli dann nicht Piggy im Weltall

Falls Interesse besteht, mach' ich 'ne FotoDoku (vom Löten, nicht vom Weltall) - wenn nicht, dann spar ich mir das!?
Gruß Jens
* deft's setup * deft's page * liquid time *
Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds

Some people have told me they don't think a fat penguin really embodies the grace of Linux, which just tells me they have never seen a angry penguin charging at them in excess of 100mph. They'd be a lot more careful about what they say if they had. Linus Torvalds
- Yes Yes Zani
- Beiträge: 1245
- Registriert: 01.01.2005 18:39:36
- Wohnort: Obersteiermark
#45
Ja bitteFalls Interesse besteht, mach' ich 'ne FotoDoku (vom Löten, nicht vom Weltall
MFG Martin
Helis:
Raptor 620SE
Helis:
Raptor 620SE