Der Protos Zählthread! Wer aus dem RHF hat alles einen?
- trailblazer
- Beiträge: 5134
- Registriert: 23.01.2008 11:32:37
- Wohnort: Hamburg - St. Pauli
#1 Der Protos Zählthread! Wer aus dem RHF hat alles einen?
Hi,
eigentlich eine eher unsinnige Sache, aber nachdem es den Protos nun schon so lange gibt (wann kam er eigentlich genau raus?), dachte ich, wir können mal eine kleine Liste der Protosbesitzer anfertigen. Als kleine Zusatzinfos kann dann jeder ja noch dazuschreiben, ob es die Cfk oder Plaste Version ist und ob er Paddellos oder "klassisch" geflogen wird. Genauere Setupangaben würden das ganze evtl. wieder zu unübersichtlich machen, deswegen einfach nur kurz : die laufende Nummer, Name (nickname) , CFK/Plaste und Flybar/Stabi.
Also wer Lust hat macht mit
dann fange ich mal an mit der Liste:
1. Andre (trailblazer), Plastik, VStabi 4.0
eigentlich eine eher unsinnige Sache, aber nachdem es den Protos nun schon so lange gibt (wann kam er eigentlich genau raus?), dachte ich, wir können mal eine kleine Liste der Protosbesitzer anfertigen. Als kleine Zusatzinfos kann dann jeder ja noch dazuschreiben, ob es die Cfk oder Plaste Version ist und ob er Paddellos oder "klassisch" geflogen wird. Genauere Setupangaben würden das ganze evtl. wieder zu unübersichtlich machen, deswegen einfach nur kurz : die laufende Nummer, Name (nickname) , CFK/Plaste und Flybar/Stabi.
Also wer Lust hat macht mit
dann fange ich mal an mit der Liste:
1. Andre (trailblazer), Plastik, VStabi 4.0
Gruss Andre
TT X50E, BeastX 12s 3300mAh
SAB Goblin 700, VStabi 5.3, Roxxy 120@VSTABI Gov
TBS DiscoveryQuad, 4s 3300maH, FPV, Multiwii 2.2, Rushduino, Fatshark Attitude
FPV Bixler 2, EZOSD
TT X50E, BeastX 12s 3300mAh
SAB Goblin 700, VStabi 5.3, Roxxy 120@VSTABI Gov
TBS DiscoveryQuad, 4s 3300maH, FPV, Multiwii 2.2, Rushduino, Fatshark Attitude
FPV Bixler 2, EZOSD
#2 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
2. Michael (Digger)
Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
#3 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
3. Mario (Mario21)
CFK noch mit Paddelstange
Gruß, Mario
CFK noch mit Paddelstange
Gruß, Mario
#4 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
Eigentlich ist der Thread wirklich überflüssig. Meinen Protos habe ich am 1.7.2008 erhalten. Da er aus der ersten Lieferung ist, die Alex bekommen hat, ist er auch einer der ersten in Deutschland. Über die verschiedenen Setups gibt es schon einen langen Thread, deshalb hier nur in Kürze:
4. Egbert (echo.zulu), Plaste, mit Paddeln
4. Egbert (echo.zulu), Plaste, mit Paddeln
- trailblazer
- Beiträge: 5134
- Registriert: 23.01.2008 11:32:37
- Wohnort: Hamburg - St. Pauli
#5 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
am Besten, jeder kopiert immer die ganze Liste und fügt sich selber unten an, dachte so ist am besten, dann hat man immer alle im letzten Post zusammen, und man kann schnell was ändern
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
Gruss Andre
TT X50E, BeastX 12s 3300mAh
SAB Goblin 700, VStabi 5.3, Roxxy 120@VSTABI Gov
TBS DiscoveryQuad, 4s 3300maH, FPV, Multiwii 2.2, Rushduino, Fatshark Attitude
FPV Bixler 2, EZOSD
TT X50E, BeastX 12s 3300mAh
SAB Goblin 700, VStabi 5.3, Roxxy 120@VSTABI Gov
TBS DiscoveryQuad, 4s 3300maH, FPV, Multiwii 2.2, Rushduino, Fatshark Attitude
FPV Bixler 2, EZOSD
- mariokober
- Beiträge: 363
- Registriert: 23.12.2008 23:29:57
- Wohnort: Stuttgart
- Kontaktdaten:
#6 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
Diabolo (Mini V-Stabi, 4535, Powerjive, 12s5000, Torq, Hercules BEC, Radix SB 710)
Controlled by Futaba T8
Verkauft: T-Rex 500, T-Rex 450, Pikke 450, SJM 400, Gaui Hurricane 500, Walkera 52, Belt CP, Sceadu 50, Vibe 50, Protos 500, Logo 500, Logo 600, Logo 600SE, Voodoo 600
Controlled by Futaba T8
Verkauft: T-Rex 500, T-Rex 450, Pikke 450, SJM 400, Gaui Hurricane 500, Walkera 52, Belt CP, Sceadu 50, Vibe 50, Protos 500, Logo 500, Logo 600, Logo 600SE, Voodoo 600
#7 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
Ich bin auch dabei!
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
Mikado Logo 600SE TS BLS451, Futaba BLS251, Pyro 700-45 Black Edition, JIVE 80+HV, 693 EDGE
Mikado Logo 500SE 12S: TS BLS451, Heck BLS251, Orbit 30-14, JIVE 80+HV, 603 EDGE
Powered by: Gens ACE | Controlled by: FUTABA T8 + IISI | Crash count: 2009/3 - 2010/1 - 2011/3 - 2012/0
Mikado Logo 500SE 12S: TS BLS451, Heck BLS251, Orbit 30-14, JIVE 80+HV, 603 EDGE
Powered by: Gens ACE | Controlled by: FUTABA T8 + IISI | Crash count: 2009/3 - 2010/1 - 2011/3 - 2012/0
#8 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
noch nicht ganz fertig, aber ich hab einen!
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
- masterste2000
- Beiträge: 643
- Registriert: 12.09.2007 19:39:14
- Wohnort: Köln
#9 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
Da trage ich mich mal dazu.
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
#10 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
Gruß Tim
---------------------------
RAVE 450: mini V-Stabi 5.1 PRO, HK2221-10 14t. 4S, YGE 40 @ 6v, 3x MKS DS95, RADIX 350, MKS DS95i, Spektrum
Logo 500 3D: mini V-Stabi blue 5.1 PRO, HK4020 12N8P 5+4x1.6YY, 14t, 6S 4000mah 40C, YGE 120 @ 6,5v BEC + 600mah 30C PFepo, 3x Ds610, EDGE 553, BLS251, Spektrum
Voodoo 600: mini V-Stabi blue 5.1 PRO, HK4025-1100 17z, 6S, JIVE 80HV, 3xSavox 1257TG, SAB 620, BLS251, Spektrum
---------------------------
RAVE 450: mini V-Stabi 5.1 PRO, HK2221-10 14t. 4S, YGE 40 @ 6v, 3x MKS DS95, RADIX 350, MKS DS95i, Spektrum
Logo 500 3D: mini V-Stabi blue 5.1 PRO, HK4020 12N8P 5+4x1.6YY, 14t, 6S 4000mah 40C, YGE 120 @ 6,5v BEC + 600mah 30C PFepo, 3x Ds610, EDGE 553, BLS251, Spektrum
Voodoo 600: mini V-Stabi blue 5.1 PRO, HK4025-1100 17z, 6S, JIVE 80HV, 3xSavox 1257TG, SAB 620, BLS251, Spektrum
- leejunfan27
- Beiträge: 351
- Registriert: 12.02.2007 11:50:15
- Wohnort: Ahlen
#11 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
Gruß
Patrick
Patrick
- snowboarder
- Beiträge: 809
- Registriert: 24.08.2007 08:26:29
- Wohnort: Stgt. / B.-Baden
#12 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
Logo 500 3D VStabi 5 // T-Rex 600 ESP Microbeast // Caliber 5 // PZ T28 Trojan [T8FG + FF7 2.4]
** If the wings are traveling faster than the fuselage, it's probably a helicopter **
- Goldfussel
- Beiträge: 1337
- Registriert: 28.10.2006 00:54:01
- Wohnort: Wettenberg
#13 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
12.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
12.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
Gruß Fussel
----------------------------------------------
Diabaolo - E700
Futaba T14 / IISI
Haetbox : -> HaDi-RC.de
----------------------------------------------
Diabaolo - E700
Futaba T14 / IISI
Haetbox : -> HaDi-RC.de
#14 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
12.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
13. Jörg (Chorge), Plastik, V-Stabi, MSH 80A, Scorpion 880KV (14T), 3x DS510, BLS251, 6S
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
12.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
13. Jörg (Chorge), Plastik, V-Stabi, MSH 80A, Scorpion 880KV (14T), 3x DS510, BLS251, 6S
HENSELEIT TDR, V-Stabi 5.1 BL Pyro 30-12, Jive80 HV, BLS251, 3x BLS451, EDGE 713
ALIGN T-Rex 450 Pro, MicroBEAST @4S Scorpion -12 + 14T, Jazz 40, DS520, 3x DS410M, Align 325D
ALIGN T-Rex 450 Pro, MicroBEAST @4S Scorpion -12 + 14T, Jazz 40, DS520, 3x DS410M, Align 325D
- Knalltuete
- Beiträge: 60
- Registriert: 09.09.2008 07:49:21
- Wohnort: Grenchen
#15 Re: Der Protos Zählthread! Wer aus dem RHF hat alles einen?
1. Andre (trailblazer), Plastik, VStabi 4.0
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
12.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
13. Jörg (Chorge), Plastik, V-Stabi, MSH 80A, Scorpion 880KV (14T), 3x DS510, BLS251, 6S
14. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
2. Michael (Digger) Plastikchassis, Stockmotor, Alignregler, 401, Savox, und bald Fusunohaube
3. Mario (Mario21) CFK noch mit Paddelstange
4. Egbert (echo.zulu), Plaste, mit Paddeln
5. Mario (mariokober) CFK von IH, Scorpion, Jive 80, TS: Savox, V-Stabi 4.0, BLS251
6. Martin (RedBull) Plastikchassis, JIVE 60+LV, Strecker 330.20 (5S Setup) , SH-1350, BLS251, V-Stabi 4.0
7. Flo(torro) cfk, yge80, scorpion 880, ds510, ltg2100 mit s9257
8. Stephan(masterste2000) Plastik, VStabi, Orbit, A123 6S
9. Tim (Timmey) Plastik, SCORPION KV880 & 14t, YGE 60, 3x S9650, CY Radix 430mm CF, GY520 & S9254, FASST
10. Patrick (Pat1802), Plaste mit Paddel
11. Andreas (snowboarder), Plastik,Paddel, Stockmotor, YGE100, Savox 1350, Savox 1290MG + GY401
12.Conny (Goldfussel), Plastik,V-Stabi, Scorpion HK-3026,DS510,s9257, 6s
13. Jörg (Chorge), Plastik, V-Stabi, MSH 80A, Scorpion 880KV (14T), 3x DS510, BLS251, 6S
14. Steven (Knalltuete) Plaste, MSH Motor, YGE80, A123, Paddel
MSH Protos 500: Scale-Projekt AS350 Picasa-Album
HK 500CMT TT: Turnigy 500H Motor, YGE80, 3x Turnigy MG930, LTG6100 Gyro, 6S A123
Blade mCPx: RTF mit DX4e