Logo 700 kommt

Benutzeravatar
Armadillo
Beiträge: 4464
Registriert: 11.04.2010 20:03:05
Wohnort: München
Kontaktdaten:

#166 Re: Logo 700 kommt

Beitrag von Armadillo »

Ich denke auch, dass er deutlich größer werden wird, schon vom Chassis her. Da wird dann auch genug Platz für 12S oder gar 14S sein. Momentan ist das ja nur bedingt möglich. Damit werden sie sich auch offen halten einen 700SE zu bringen. Würde zumindest Sinn machen die doch sehr erfolgreiche Produktstrategie so weiterzuführen. :)
HeliChat.de - Von Helipiloten für Helipiloten - Schaut einfach mal rein! ;-) Chat User Treffen 2011 - Chat User Treffen 2012

Goblin 700 VStabi - Daten auf Helifleet.com
Voodoo 400 VStabi - Daten auf Helifleet.com
Protos 500 streched VStabi - Daten auf Helifleet.com
Benutzeravatar
ChainMan
Beiträge: 790
Registriert: 15.11.2009 14:52:19
Wohnort: bei Augsburg

#167 Re: Logo 700 kommt

Beitrag von ChainMan »

Wer bringt den einen 800er ??
Nach dem ich Legastheniker bin können Rechreib- und Gramtikfehler vor kommen.

Logo 400 VStabi 5.1 Pro - F. R-617FS - F. S9650 - F. BLS251 - Jive 60 - Scorpion 3026-1400 - Thunder Power 6S 2700er 30C
Logo 600SE VStabi 5.1 Pro - F. R-617FS - F. BLS451 - F. BLS251 - Jive 80 - Pyro 52er - Hacker 10S 4500er 20C
Protos VStabi 5.1 Pro - F. R6180SB - F. BLS251 - S. 1257MG - Scorpion 880KV - YGE 60 - Turnigy 6S 2450mAh 20C
Futaba FF10

Mein Händler des Vertrauens http://helisonic.de
Benutzeravatar
asassin
Beiträge: 5931
Registriert: 13.03.2008 21:45:25
Wohnort: Bremen-Brinkum/Stuhr

#168 Re: Logo 700 kommt

Beitrag von asassin »

denke, Align hat da was in der Mache
Grüße, Martin

Wave-Helicopter
Benutzeravatar
Armadillo
Beiträge: 4464
Registriert: 11.04.2010 20:03:05
Wohnort: München
Kontaktdaten:

#169 Re: Logo 700 kommt

Beitrag von Armadillo »

Bis jetzt Henseleit, Align und Shape
HeliChat.de - Von Helipiloten für Helipiloten - Schaut einfach mal rein! ;-) Chat User Treffen 2011 - Chat User Treffen 2012

Goblin 700 VStabi - Daten auf Helifleet.com
Voodoo 400 VStabi - Daten auf Helifleet.com
Protos 500 streched VStabi - Daten auf Helifleet.com
Benutzeravatar
worldofmaya
Beiträge: 5915
Registriert: 06.06.2007 22:49:28
Wohnort: Graz *
Kontaktdaten:

#170 Re: Logo 700 kommt

Beitrag von worldofmaya »

Henseleit, Align, Shape... den Joker und den RJX gibt es schon länger. Wenn man sich die Blätter ansieht die raus kommen, sieht man auch ein immer größer werdendes Angebot.
-Klaus
Suzi-LAOS-Protos500-DNHP-Centurio-Maximus
Team heligarage.at
Benutzeravatar
ChainMan
Beiträge: 790
Registriert: 15.11.2009 14:52:19
Wohnort: bei Augsburg

#171 Re: Logo 700 kommt

Beitrag von ChainMan »

Wollte das ma au hier posten für die nicht bei RC Heli oder Runryder lesen.
Zitat von Dave Dahl bei :

It is pretty common knowledge by now, so I'll say that in conversations I've had with Ralf, he told me the heli is being designed from the start to accommodate 800mm blades.

I don't want to get in trouble with Mikado, so I'll keep this vague. But I've seen some drawings of the project, some photos of prototype components, and seen in person some of the parts. The heli will be physically LARGE by what most would imagine to be the "standard size" for a "700 class" heli.

With that said I'm shutting-up before I get in hot water with Ralf
...........................

"...dreaming the machine..."



Yea, that's all we have right now. And I know my next few comments will just be for the sake of hype. Just trying to keep the dream alive

But I've over time (and also just recently with new information), been privy to information about the design, some changes Mikado's made mid-project, and photos and or drawings/computer renderings of completed portions (tail drive assemblies, main gears, head etc., stuff like that). The project is progressing (-:

Now you guys got to respect I can't release info about the project without Mikado's permission. They've been nice to pass-on to Kyle and I some of the details, and I can't betray their trust. But I can say this:

1) If the particulars and details about the Logo 700 were just "so-so", and the design was "your standard 700 type stuff" already on the market, then I'd best just remain silent, and let the model come.

2) But if I say after seeing the particulars, "WOW, this is gonna be cool, with some new innovations, looks to be an awesome design and bulletproof...", and in the end turns out to be "standard 700 type stuff" already on the market, then I'd look pretty stupid down the road. To say it was something it wasn't would be a mistake.

Well, I'm saying it's gonna be cool, with some new innovations, looks to be an awesome design and bulletproof. And I'm fairly certain I won't be made to look stupid down the road.

Just "keeping the dream alive"
http://rc.runryder.com/helicopter/t597752p4/
Nach dem ich Legastheniker bin können Rechreib- und Gramtikfehler vor kommen.

Logo 400 VStabi 5.1 Pro - F. R-617FS - F. S9650 - F. BLS251 - Jive 60 - Scorpion 3026-1400 - Thunder Power 6S 2700er 30C
Logo 600SE VStabi 5.1 Pro - F. R-617FS - F. BLS451 - F. BLS251 - Jive 80 - Pyro 52er - Hacker 10S 4500er 20C
Protos VStabi 5.1 Pro - F. R6180SB - F. BLS251 - S. 1257MG - Scorpion 880KV - YGE 60 - Turnigy 6S 2450mAh 20C
Futaba FF10

Mein Händler des Vertrauens http://helisonic.de
Benutzeravatar
Armadillo
Beiträge: 4464
Registriert: 11.04.2010 20:03:05
Wohnort: München
Kontaktdaten:

#172 Re: Logo 700 kommt

Beitrag von Armadillo »

Danke für die Info, sehr interessant! :)
HeliChat.de - Von Helipiloten für Helipiloten - Schaut einfach mal rein! ;-) Chat User Treffen 2011 - Chat User Treffen 2012

Goblin 700 VStabi - Daten auf Helifleet.com
Voodoo 400 VStabi - Daten auf Helifleet.com
Protos 500 streched VStabi - Daten auf Helifleet.com
Benutzeravatar
Hubschrauberpilot
Beiträge: 16
Registriert: 13.11.2010 20:49:55
Wohnort: Öhringen

#173 Re: Logo 700 kommt

Beitrag von Hubschrauberpilot »

Bin auf die Vorstellung des xxtreme gespannt morgen auf der Messe. Ich wünsche mir dringend einen Starrantrieb.
T-Rex 500, AC-3X, S9650, S9254, RJX, 6s1p und 7s1p A123, Align Regler, Stock Motor
Logo 600SE, AC-3X, BLS 451, BLS 252, 14s LiFePo 3000mAh, Jive 80HV, Scorpion HK-4035 400KV.
mozart1982
Beiträge: 1367
Registriert: 08.02.2009 16:49:03
Wohnort: Gera

#174 Re: Logo 700 kommt

Beitrag von mozart1982 »

geiles teil aber 12-14 s sind halt nix für meinen geldbeutel ... und die alu verstärkung an meinem carbon chassi find ich viel geiler... aber der neue kopf is ganz nett...
Benutzeravatar
face
Beiträge: 3938
Registriert: 22.01.2010 13:58:09
Wohnort: Aachen
Kontaktdaten:

#175 Re: Logo 700 kommt

Beitrag von face »

N bissl überdimensioniert oder? Ist wohl drauf ausgelegt dass man den auch locker als 800er fliegen kann... wenn dem aber so wäre würden die ja auch damit werben, tun sie?
Compass 7HV V-Stabi 5.2 Pro, Scorpion 5025, YGE 160 HV, Hercules Super BEC, MKS HBL 950/980
Protos Hyperion HV-Servos, 3226, VStabi usw.
Futaba T8

"Science is like sex. Sure, it may give some practical results, but that's not why we do it." Richard Feynmann

heliaddict
Benutzeravatar
Kupfer
Beiträge: 2299
Registriert: 09.02.2010 17:25:23
Wohnort: Hollabrunn / Niederösterreich

#176 Re: Logo 700 kommt

Beitrag von Kupfer »

Interessantes Design, hat ein bisschen was vom TDR. Ich dachte ja nicht, das Mikado jemals das Design wechseln wird^^
Dieses X Verstrebungen wie beim N9, gefallen mir auch gut. Aber leisten kann ich mir den sowieso nicht :cry: :D
face hat geschrieben:N bissl überdimensioniert oder? Ist wohl drauf ausgelegt dass man den auch locker als 800er fliegen kann... wenn dem aber so wäre würden die ja auch damit werben, tun sie?
Steht doch dort: "Extrem 3D Helicopter für 700 - 800 mm Rotorblätter"
"Das dem Sender beiliegende Papier ist kein Füllstoff für die Verpackung, sondern eine Bedienungsanleitung, in der das alles beschrieben ist."

Synergy N9 (OS MAX 91SZ, Hatori 938 90FS-3D, RevMax + S3152, 3x Futaba S9351, Align DS650, Maniac 703, Futaba CGY750)
Prôtos 500 SE (Scorpion 12N14P 5+4x1.18D, YEP 80A + CC BEC, 3x Hyperion DH16-SCD, DH16-GCD, SAB 470, Mini V-Stabi 5.3.4 PRO)

T4EX...->...FF7...->...T8FG...->...T14SG......einmal Futaba, immer Futaba.
Demon F5D -- Mini Hawk -- SixthV4 -- Funjet -- RS Simply -- Magic3D -- Typhoon3D -- Robbe Gemini -- Rare Bear Nano -- Junsi 308DUO
Benutzeravatar
Askalon
Beiträge: 573
Registriert: 21.01.2007 20:55:48
Wohnort: Fürstenfeldbruck

#177 Re: Logo 700 kommt

Beitrag von Askalon »

Ja, tun sie, das wurde ja schon im Vornherein versprochen das er mit 800er Latten zum fliegen ist.
Sonst würden sie sich ja auch eine eigene Konkkurenz machen.
Interessantes Design, hat ein bisschen was vom TDR
Lol, der mag von vielen Heli was haben, aber sicherlich nicht vom TDR.
Noch dazu sind sich alle Helis ähnlich, das Rad kann man sicht neu erfinden.
Und ich finde sie sind ihrem Design treu gebliebenalso man sieht trotz den Neuerungen das es ein logo ist.

gruss
Watt volt ihr?"Ampere!!"
SAB Goblin mit 4525 520kv/Jive/SB-2271SG &SB-2272MG/Vstabi 5.2
Prôtos Fbl minivstabi/TS:Savox SH-1250mg/Heck:Savox SH-1290mg
Trex 250 Ltg 2100/TS hs45hb
Benutzeravatar
face
Beiträge: 3938
Registriert: 22.01.2010 13:58:09
Wohnort: Aachen
Kontaktdaten:

#178 Re: Logo 700 kommt

Beitrag von face »

Ahja wer lesen kann ist klar im Vorteil^^ Finde ich gut... der Trend geht ja klar zu größeren Helis und so ist man zukunftssicher, grade wenn man dann z.B. auch mal Scale fliegen will. Gibts Infos zum Gewicht?
Compass 7HV V-Stabi 5.2 Pro, Scorpion 5025, YGE 160 HV, Hercules Super BEC, MKS HBL 950/980
Protos Hyperion HV-Servos, 3226, VStabi usw.
Futaba T8

"Science is like sex. Sure, it may give some practical results, but that's not why we do it." Richard Feynmann

heliaddict
mozart1982
Beiträge: 1367
Registriert: 08.02.2009 16:49:03
Wohnort: Gera

#179 Re: Logo 700 kommt

Beitrag von mozart1982 »

ich bekomm bein se noch nicht mal ordentlich in meinen fabia... aber irgend welche träume müssen ja bleiben sonst macht das hobby ja auch kein spaß mehr... auf jedenfall wird mein next auto nicht so nen mini teil.... :roll: :wink:
Antworten

Zurück zu „Logo 500/600 3D/SE/SX“