hey guys sorry I do not speak German I have to use babel fish translate. Hope you can understand english. Im trying to have this ready by the end of this week. It can use the raised tail from heliartist http://helidirect.com/heliartist-450-bo ... -17813.hdx
I also made a quick video of the prototype fuselage flying: http://www.youtube.com/watch?v=RCPy6EHHiFA
I am using a FP motor driven tail in mine. It does fly really well and predictable.
I may later on do the Wessex version and I may also do the turbine version. It is a matter of making a couple separate nose sections. I will wait and see the type of demand.
So Far I have made 2nd fuselage and still working on some more details
I am now accepting a list of those who may be interested in one of these
Email me: Darthdrk@Juno.com Subject: H-34
450 size Sikorsky H-34/S-58
#16 Re: 450 size Sikorsky H-34/S-58
- Dateianhänge
-
- PDR_0111.JPG (48.5 KiB) 820 mal betrachtet
-
- PDR_0109.JPG (41.58 KiB) 820 mal betrachtet
-
- Beiträge: 43
- Registriert: 09.06.2009 21:59:47
#17 Re: 450 size Sikorsky H-34/S-58
Hi, ich weiß, es geht hier um den schönen Rumpf von Darthdrk
Kurze Frage, kennt jemand Diesen hier:
http://www.dds-modelltechnik.de/Sikorsk_S58.htm
@ Dieter: klasse Seite, super Bericht, evtl. sollten wir einen eigenen Fred hier aufmachen!!??
Claus
Kurze Frage, kennt jemand Diesen hier:
http://www.dds-modelltechnik.de/Sikorsk_S58.htm
@ Dieter: klasse Seite, super Bericht, evtl. sollten wir einen eigenen Fred hier aufmachen!!??
Claus
#18 Re: 450 size Sikorsky H-34/S-58
Hallo,
es gibt eine Wessex (die S-58 mit Turbinenantrieb wie die "Screaming Mimi") mit 2m Rotordurchmesser von CAD Modelltechnik Jung: http://www.cad-modelltechnik-jung.de/pr ... wessex.htm
Ich hab mal angefangen eine S-58 zu konstruieren, mit 7-Zylinder-Seidel-Sternmotor und Vario-Rotorkopf... als ich mal die Kosten für das Projekt überschlagen habe, hab ich wieder aufgehört rumzuspinnen...
In English: there exists a Wessex (the turbine version of the S-58 like the "Screaming Mimi) from CAD Modelltechnik Jung: http://www.cad-modelltechnik-jung.de/pr ... wessex.htm
I startet to design a S-58 with Seidel 7 cylinder radial engine and Vario rotor head, but as I calculated the costs of all components I stopped the project...
But now I stop spamming darthdrk's nice H-34 450 size fuselage thread...
Gruß, Alex
es gibt eine Wessex (die S-58 mit Turbinenantrieb wie die "Screaming Mimi") mit 2m Rotordurchmesser von CAD Modelltechnik Jung: http://www.cad-modelltechnik-jung.de/pr ... wessex.htm
Ich hab mal angefangen eine S-58 zu konstruieren, mit 7-Zylinder-Seidel-Sternmotor und Vario-Rotorkopf... als ich mal die Kosten für das Projekt überschlagen habe, hab ich wieder aufgehört rumzuspinnen...
In English: there exists a Wessex (the turbine version of the S-58 like the "Screaming Mimi) from CAD Modelltechnik Jung: http://www.cad-modelltechnik-jung.de/pr ... wessex.htm
I startet to design a S-58 with Seidel 7 cylinder radial engine and Vario rotor head, but as I calculated the costs of all components I stopped the project...
But now I stop spamming darthdrk's nice H-34 450 size fuselage thread...
Gruß, Alex
- Dateianhänge
-
- Getriebe-Entwurf-1.jpg (36.68 KiB) 774 mal betrachtet
-
- S-58-Entwurf-1.jpg (102.6 KiB) 774 mal betrachtet
Helis: T-Rex 500 ESP, T-Rex 600, Sonix SX 450 SE mit Experimental-FBL auf MultiWii-Basis, Schlüter Junior 50, E-Sky Belt CP V2, E-Sky D700, E-Flite Blade mCPx
Flieger: Focke Wulf FW 190 (GWS & Hype), Me 262 (GWS&Dynam), He 162 (Hobbyking), Do 335 (arkai), Horten H VII und H IX (Eigenbau), Horten "Micro-Elli", Edge Red Bull (Kyosho) und eine Ente die nicht fliegen will...
Sender: MPX Evo 9 M-LINK
Status: Fliegzeugs rumstehen lassen bis die Akkus kaputt oder die Gummis porös sind........
meine Belt-CP Hilfeseite - meine Fliegerseite
#19 Re: 450 size Sikorsky H-34/S-58
Heres a couple more pics
- Dateianhänge
-
- PDR_0119.JPG (119.13 KiB) 728 mal betrachtet
-
- PDR_0117.JPG (108.25 KiB) 728 mal betrachtet
#20 Re: 450 size Sikorsky H-34/S-58
Hi,
very nice!
The chassis looks like an E-Sky Belt CP...?
Regards, Alex
very nice!
The chassis looks like an E-Sky Belt CP...?
Regards, Alex
Helis: T-Rex 500 ESP, T-Rex 600, Sonix SX 450 SE mit Experimental-FBL auf MultiWii-Basis, Schlüter Junior 50, E-Sky Belt CP V2, E-Sky D700, E-Flite Blade mCPx
Flieger: Focke Wulf FW 190 (GWS & Hype), Me 262 (GWS&Dynam), He 162 (Hobbyking), Do 335 (arkai), Horten H VII und H IX (Eigenbau), Horten "Micro-Elli", Edge Red Bull (Kyosho) und eine Ente die nicht fliegen will...
Sender: MPX Evo 9 M-LINK
Status: Fliegzeugs rumstehen lassen bis die Akkus kaputt oder die Gummis porös sind........
meine Belt-CP Hilfeseite - meine Fliegerseite
#21 Re: 450 size Sikorsky H-34/S-58
I´m glad to see another wonderful fuselage from you.Darthdrk hat geschrieben:Heres a couple more pics
Keep on construction
But , since the 500-Class has become the allover Beginner Class , (cheaper Lipos, more stable flight than a 450 Class Heli) .
Did you decide making 500-Class Fuselages too ... ?
grüße Michael
----------------------------------------------------------
Flying is the best fun you can have - with your pants on
T8FG mit SpeckDrumm MOD/ T9CP,MCPx @T8FG SpeckDrumm,TT Mini Titan FBL ,GAUI EP200 FBL,
TREX 500 FBL, suche Sponsor für MicroBeast Test ....
Status: Rundflug mit Kunstflugeinlagen manchmal Tic und weniger Toc
Besucht uns auf HeliChat.de - Von Helipiloten für Helipiloten
----------------------------------------------------------
Flying is the best fun you can have - with your pants on
T8FG mit SpeckDrumm MOD/ T9CP,MCPx @T8FG SpeckDrumm,TT Mini Titan FBL ,GAUI EP200 FBL,
TREX 500 FBL, suche Sponsor für MicroBeast Test ....
Status: Rundflug mit Kunstflugeinlagen manchmal Tic und weniger Toc
Besucht uns auf HeliChat.de - Von Helipiloten für Helipiloten
#22 Re: 450 size Sikorsky H-34/S-58
One of these days I do hope to start making bigger fuselages. Right now I have so much invested in the 450 size equipment. If and when I do go to making bigger fuselages, I will just about have to change out all the molding equipment I have and that will be an expense I cant afford right now. I will need to first invest in a good 500 size helicopter. I will have to get bigger molding tables and frames. Material costs will be a little more expensive . Right now I just dont have extra capital to invest.