
Es ist vollbracht!!! Hab IHN mir bestellt!!!
#50
Ihr seid ja wahnsinige
Ist den bei euch schon einmal der Lipo abgebrant? Ein kollege hat ein Internet Shop (www.eflight.ch)
Und bei ihm stehen die Lipos nur so in den Regalen herum und bis heute hat noch keine gebrannt

Und bei ihm stehen die Lipos nur so in den Regalen herum und bis heute hat noch keine gebrannt

#51
bis jetzt ist bei mir nix passiert. Aber trotzdem lagere und lade ich die Dinger in einer Kiste. Würde mich totärgern wenn mir wegen Lipos die Bude abbrennt.
#53
Wenn ich mir die Koffer von Euch so anschaue
,
sind ja ordentlich Euros drinnen
.
Wäre es nicht schade wenn ein Akku mal spinnt und anfängt zu rauchen,
das gleich alle Akkus vernichtet werden
Gruß,
Günny

sind ja ordentlich Euros drinnen

Wäre es nicht schade wenn ein Akku mal spinnt und anfängt zu rauchen,
das gleich alle Akkus vernichtet werden

Gruß,
Günny
MX 16s,
-RoXXter 33
Jazz 55-6-18 + Orbit 25/12
GY401
Empf. Graupner DS19 FM/S
3x HS225BB 1x S 9254
-RoXXter 33
Jazz 55-6-18 + Orbit 25/12
GY401
Empf. Graupner DS19 FM/S
3x HS225BB 1x S 9254
#54
Besser die Akkus anstatt das ganze HausGünny hat geschrieben:Wenn ich mir die Koffer von Euch so anschaue,
sind ja ordentlich Euros drinnen.
Wäre es nicht schade wenn ein Akku mal spinnt und anfängt zu rauchen,
das gleich alle Akkus vernichtet werden![]()
Gruß,
Günny

- Juergen110
- Beiträge: 3762
- Registriert: 21.10.2004 21:02:48
- Wohnort: Hattingen a.d.R.
- Kontaktdaten:
#55
Auch´n Foto beisteuer.....tracer hat geschrieben: Hier mal ein Teil meines Akku-Geraffels.

Allerdings fehlen noch einige.....

Stecken in den Heli´s und keine Lust sie rauszufrickeln....

Mit freundlichen Grüssen
Jürgen
Jürgen
-
- Beiträge: 24
- Registriert: 08.11.2005 15:51:50
#58
Dear alle Roxxter flyers
Very nice to see so many new owners
and my good -all those lipo battery pack
I have tested some lipo over time, and will post my lipo setup for the Roxxter 33 later on.
To the new owners
When I started the building process on my Roxxter 33 it seems to be a great idea to make some small upgrades to make the Roxxter fly even more stabil, will post my picture…
Just a question, is there any pilots out there using the Futaba 9c Super for the Roxxter 33 (I am) because it will be great to see the setups different on using , expo, pitch setup, idel up failsafe and some practice to make the setup even better for the Roxxter,
So please post your setup for the Futaba 9c thanks
Br
S.Carstensen
Very nice to see so many new owners

I have tested some lipo over time, and will post my lipo setup for the Roxxter 33 later on.
To the new owners
When I started the building process on my Roxxter 33 it seems to be a great idea to make some small upgrades to make the Roxxter fly even more stabil, will post my picture…
Just a question, is there any pilots out there using the Futaba 9c Super for the Roxxter 33 (I am) because it will be great to see the setups different on using , expo, pitch setup, idel up failsafe and some practice to make the setup even better for the Roxxter,
So please post your setup for the Futaba 9c thanks

Br
S.Carstensen
- tracer
- Operator
- Beiträge: 63804
- Registriert: 18.08.2004 18:50:03
- Wohnort: Kollmar
- Has thanked: 2 times
- Been thanked: 2 times
- Kontaktdaten:
#59
Right now, my RoXXter is still grounded, but that was the setup, when 3D-Daniel was flying with it:Carstensen hat geschrieben: Just a question, is there any pilots out there using the Futaba 9c Super for the Roxxter 33 (I am) because it will be great to see the setups different on using , expo, pitch setup, idel up failsafe and some practice to make the setup even better for the Roxxter,
So please post your setup for the Futaba 9c thanks![]()
Pitch 0 25 50 75 100 straight, on all modes.
Zero pitch on center.
Throtlle 0 0 0 0 0 on norm, 60 60 60 60 60 on idle-1 and 80 80 80 80 80 on idle-2
No Expo.
Failsave only throttle 0 0 0 0 0
#60
Hi Carstensen,
I use the Futaba 9 FF Super, ordered the RoXXter 33 and I will pick it up next week (on the 6th!)
. I will meet Lutz Focke then and ask him about the preferences for soft 3-D. Iwill inform you when I get the data.
Just a fiew days, take care. Many safe landings, the best for you , Michel
I use the Futaba 9 FF Super, ordered the RoXXter 33 and I will pick it up next week (on the 6th!)

Just a fiew days, take care. Many safe landings, the best for you , Michel
_____________________________________________________________
LF-Technik :
RoXXter 11, Jazz 55-6-18, Strecker, 401 mit DS 3781, 3x HS 65 HB, R149DP;
RoXXter 11 Rigid, Jazz 55-6-18, Strecker, Gyrobot 900 mit S 9257, 3x HS 65 HB, R617;
RoXXter 22 Rigid, Jazz 80-6-18, Plettenberg 25-08 HE, Gyrobot mit 9254, 3x Futaba S9650; R6014;
RoXXter 33, Jazz 80-6-18, Plettenberg Orbit 25-12, GY 611 mit S9256, 3 x HS 225 BB, R149DP;
RoXXter 33 SE Rigid, Jive 80 HV, Plettenberg 30-12 HE, Gyrobot 700, Futaba BL 451,251,R617;
RoXXter 55er Rigid, Jazz 55-10-32, Plettenberg 30-12, Gyrobot 900 mit S9254, 3x S9650, R6014;
http://www.lf-technik.de
Mikado : Logo 500 3D / V-Stabi.
Curtis : Rave 3D / Gyrobot 700
Henseleit : MP XL V91
____________________________________________________________
Futaba: FF9 Super (35Mhz + 2,4Ghz) / T12Z (35MHz + 2,4GHz)
LF-Technik :
RoXXter 11, Jazz 55-6-18, Strecker, 401 mit DS 3781, 3x HS 65 HB, R149DP;
RoXXter 11 Rigid, Jazz 55-6-18, Strecker, Gyrobot 900 mit S 9257, 3x HS 65 HB, R617;
RoXXter 22 Rigid, Jazz 80-6-18, Plettenberg 25-08 HE, Gyrobot mit 9254, 3x Futaba S9650; R6014;
RoXXter 33, Jazz 80-6-18, Plettenberg Orbit 25-12, GY 611 mit S9256, 3 x HS 225 BB, R149DP;
RoXXter 33 SE Rigid, Jive 80 HV, Plettenberg 30-12 HE, Gyrobot 700, Futaba BL 451,251,R617;
RoXXter 55er Rigid, Jazz 55-10-32, Plettenberg 30-12, Gyrobot 900 mit S9254, 3x S9650, R6014;

http://www.lf-technik.de
Mikado : Logo 500 3D / V-Stabi.
Curtis : Rave 3D / Gyrobot 700
Henseleit : MP XL V91
____________________________________________________________
Futaba: FF9 Super (35Mhz + 2,4Ghz) / T12Z (35MHz + 2,4GHz)