#1 Neue AirWare für Dx9/10/18
Verfasst: 01.05.2014 15:45:38
HorizonHobby hat geschrieben:
New Features & Improvements
• Swash setup with reversed channels no longer needs to be done on opposite throw.
• Characters can now be inserted or deleted while editing text. Simply select the insert character <+> or the delete character >-< while editing.
• “Auto-zoom” on the mix curve edit screen will show wave at 10x magnification when there is room on the display.
• Flight Mode switch can now have position values defined for each flight mode using the Digital Switch Setup screen. This is ideal for multi-copter flight mode control, but all switches may be redefined.
• Flight Mode may be used as a mix input or channel input source. It will use the values defined in the Digital Switch Setup screen as if they were analog inputs.
• Added “no image” as an option for all model types and enabled several trans-model type icons.
• Vario graph width does not reset every power cycle.
• Telemetry alarms are suspended while editing telemetry settings.
• Improved reasonable options for sailplane throttle switch inputs.
• Improved import/export compatibility between all radio types (except DX7s/DX8)
Corrections
• Models 50 and above now bind properly.
• Translation improvements for all languages.
• Model image now exports.
• Improved import/export for many features including combo switches, sub-FM rates, timers, and telemetry features.
• Mixes for 6-aileron wings function properly now.
• Trainer status is now voiced correctly, based upon settings.
• Gyro trims re-enabled in Heli mode.
• Flight Mode Name editor has been re-enabled.
• Telemetry Log switch operation force-enabled properly.
• Removed 10% curve mix limitation.
• E-Ring is now properly disabled for swashplates where it is not supported.
• Improved warning for re-mapped channels which use switch inputs.
• Mixing flaps to one channel would occasionally result in the mix being applied to all channels. This has been fixed.
DX9 Audio System Changes
• Improved support for Sky Zone and Fat Shark head trackers.
• Improved reliability of sound file transfers.
• Improved ability to cancel sound transfers. You still must power down after a transfer abort.
• Corrected swap of vario vs. warning volume settings .