MSHeli Help
#1 MSHeli Help
Hello everybody, this is Corrado if anybody needs help on the Protos or Mini i'll do my best to answer here.
Please write on this thread and not in privat so answer to question can be useful to other users too.
Please write in English, my german is not so good
Corrado
Please write on this thread and not in privat so answer to question can be useful to other users too.
Please write in English, my german is not so good
Corrado
#3 Re: MSHeli Help
Hi Corrado!
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
-
- Beiträge: 1367
- Registriert: 08.02.2009 16:49:03
- Wohnort: Gera
#6 Re: MSHeli Help
Question No1:
i´ve little problems with the one-way or rather the bearings.
the one-way fits perfectly on the adaptor, but not the bearings.
i don´t want to mount the bearings with force, so i had to sand the complete adaptor.
I tried a few bearings, all had the same problem.
since we use motors like this... ... i´m afraid, that the one-way gets problems with the smaller diameter of the adaptor.
these motors eliminate bad one-way´s without mercy
i´ve little problems with the one-way or rather the bearings.
the one-way fits perfectly on the adaptor, but not the bearings.
i don´t want to mount the bearings with force, so i had to sand the complete adaptor.
I tried a few bearings, all had the same problem.
since we use motors like this... ... i´m afraid, that the one-way gets problems with the smaller diameter of the adaptor.
these motors eliminate bad one-way´s without mercy
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
#7 Re: MSHeli Help
hi corrado ... nice to have contact directly...
.. i would like to use my older scorpion 2221-12 on the mini-protos - so i have to cut the motorshaft? correct? any special things to look at, when doing that?
macem
.. i would like to use my older scorpion 2221-12 on the mini-protos - so i have to cut the motorshaft? correct? any special things to look at, when doing that?
macem
#8 Re: MSHeli Help
@ Torro, i am not sure i understand your problem.
@Macem, yes you have to cut your motor shaft. When doing it, make sure not to overheat the shaft and pack the motor with a plastic bag so no debris get inside.
Corrado
@Macem, yes you have to cut your motor shaft. When doing it, make sure not to overheat the shaft and pack the motor with a plastic bag so no debris get inside.
Corrado
#9 Re: MSHeli Help
you have the pinion and two bearings for it.HighFreq hat geschrieben:@ Torro, i am not sure i understand your problem.
the pinion fits perfectly on the adaptor, the bearings not.
i had to sand the adaptor, to fit the bearings.
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
#10 Re: MSHeli Help
Hello Corrado !
Nice to meet you HERE
Nice to meet you HERE
Mini Prôtos Stretch: SAB350mm, 3xSH-0254, 1x S9257, MICROBEAST, SMC16Scan, Scorpion HK2221-16 2010Kv, MSH/YGE60, 16T Pinion, 4S1800
Prôtos 500 CFK Stretch: SAB470mm, 3xSH-1350, 1xDS620, ACT Slim-8 S3D, MICROBEAST, YGE120, HK3026-12N14P (5+4x1,18D 840kV) 14T Pinion, 6S2650
Raptor 50 Titan: GCT600mm, SMC16Scan, 2x 3152, 1 HS-645MG, 1x DS620 + GY401, Throttle Jockey PRO + S9254 + OS MAX 50 SX-H Hyper + Krumscheid Reso, 30%N
T-Rex 700E V2-Stretch: NitroHeckgetriebe (1:4,95), Align 105mm, Align 800mm, 3xDS610, 1xDS650, MICROBEAST, Align RCE-B6X BEC(6A), Align BL700MX (470Kv), Castle ICE2HV 120A, 12S5000
Funke: MX16s mit ACT S3D Uno-Umbau
Prôtos 500 CFK Stretch: SAB470mm, 3xSH-1350, 1xDS620, ACT Slim-8 S3D, MICROBEAST, YGE120, HK3026-12N14P (5+4x1,18D 840kV) 14T Pinion, 6S2650
Raptor 50 Titan: GCT600mm, SMC16Scan, 2x 3152, 1 HS-645MG, 1x DS620 + GY401, Throttle Jockey PRO + S9254 + OS MAX 50 SX-H Hyper + Krumscheid Reso, 30%N
T-Rex 700E V2-Stretch: NitroHeckgetriebe (1:4,95), Align 105mm, Align 800mm, 3xDS610, 1xDS650, MICROBEAST, Align RCE-B6X BEC(6A), Align BL700MX (470Kv), Castle ICE2HV 120A, 12S5000
Funke: MX16s mit ACT S3D Uno-Umbau
#11 Re: MSHeli Help
Please sell the third BB support separately!!!
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
#12 Re: MSHeli Help
ok, thanks a lot ... how long should the shortened, outstanding part of the motorshaft be, to fit into the adaptor? is there any tolerance?HighFreq hat geschrieben: ...
@Macem, yes you have to cut your motor shaft. When doing it, make sure not to overheat the shaft and pack the motor with a plastic bag so no debris get inside.
Corrado
regards, macem
#13 Re: MSHeli Help
go on msheli.com, there is a manual.
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
#14 Re: MSHeli Help
... thanks to flo,
... but i checked the manual already and did not find any reference to the motorshaft...,
regards, macem
... but i checked the manual already and did not find any reference to the motorshaft...,
regards, macem
#15 Re: MSHeli Help
hab übersehen, daß Du den Mini meinst
Gruß, Flo
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg
Diabolo,3xSB-2271SG,SB2283MG, Ikon,YGE160HVXX+großerbösermotor, LinusBEC
Diabolo550 3xHV9767, SB-2272MG, Brain, YGE120LVK+passtgraadso,LV2BEC
450L3xDS430,1xDS525,Brain,YGE60+Giftzwerg