Code: Alles auswählen
/ # cat /proc/cpuinfo
system type : Realtek Venus
Code: Alles auswählen
/ # cat /proc/cpuinfo
system type : Realtek Venus

Code: Alles auswählen
have fun with KEYWELT on your Nokia D-BOX2 - Kernel 2.4.37-dbox2 (08:46:11)...
dbox login: root
BusyBox v1.7.2 (2009-05-23 13:18:33 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # uname -a
Linux dbox 2.4.37-dbox2 #14 Sa Mai 23 13:10:47 CEST 2009 ppc unknown
/var # cat /proc/cpuinfo
processor : 0
cpu : 8xx
clock : 67MHz
bus clock : 67MHz
revision : 0.0 (pvr 0050 0000)
bogomips : 66.96
/var # cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 31625216 25751552 5873664 0 3121152 10133504
Swap: 0 0 0
MemTotal: 30884 kB
MemFree: 5736 kB
MemShared: 0 kB
Buffers: 3048 kB
Cached: 9896 kB
SwapCached: 0 kB
Active: 6744 kB
Inactive: 6224 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 30884 kB
LowFree: 5736 kB
SwapTotal: 0 kB
SwapFree: 0 kB
/var #

kowi hat geschrieben:Sonst versteifst du dich doch auch immer auf die "Marktführer"

Na, halt deutlich älter, weniger Speicher ...fireball hat geschrieben:Was auch immer Du uns sagen willst...
Code: Alles auswählen
# uname -a
Linux WDTV-39532 2.6.15-TvDock #6 PREEMPT Fri Feb 27 20:09:23 CST 2009 mips unkn
# cat /proc/cpuinfo
system type : Sigma Designs TangoX
processor : 0
cpu model : MIPS 4KEc V6.9
Initial BogoMIPS : 291.84
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available
System bus frequency : 198000000 Hz
CPU frequency : 297000000 Hz
DSP frequency : 297000000 Hz
# cat /proc/meminfo
MemTotal: 108036 kB
MemFree: 5056 kB
Buffers: 1624 kB
Cached: 50796 kB
SwapCached: 0 kB
Active: 47548 kB
Inactive: 41928 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 108036 kB
LowFree: 5056 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 4 kB
Writeback: 0 kB
Mapped: 47872 kB
Slab: 9268 kB
CommitLimit: 54016 kB
Committed_AS: 46236 kB
PageTables: 628 kB
VmallocTotal: 1048560 kB
VmallocUsed: 150156 kB
VmallocChunk: 897240 kB
Wenn du dem Teil schon die Signale, so wie er sie ausgeben muß, reingibst, dann wird er wohl keinen Dekoder drin haben. Es sei denn, du hast da noch andere Anschlüsse, die du grad nicht nutzt.tracer hat geschrieben:6x Cinch für Surround und 2x Cinch für Stereo als Eingang.